This new series corresponds to the remaining patches from [1]
addressing fixed memory region support for remote processor.
The three remaining patches allow to:
- assign a specific memory region to vdev sub device. As all virtio based
services are using virtio device parent for memory allocation, I propose to
keep a dedicated vdev device per virtio link for memory allocation. A second
step will be to used virtio device itself.
- migrate ST driver on new memory carveout management
- allocate virtio rpmsg buffer from parent device
Regards,
Loic
[1] https://lkml.org/lkml/2018/7/27/612
Loic Pallardy (3):
remoteproc: create vdev subdevice with specific dma memory pool
remoteproc: st: add reserved memory support
rpmsg: virtio: allocate buffer from parent
drivers/remoteproc/remoteproc_core.c | 46 ++++++++++++++--
drivers/remoteproc/remoteproc_internal.h | 1 +
drivers/remoteproc/remoteproc_virtio.c | 42 ++++++++++++++-
drivers/remoteproc/st_remoteproc.c | 91 ++++++++++++++++++++++++++++----
drivers/rpmsg/virtio_rpmsg_bus.c | 6 +--
include/linux/remoteproc.h | 1 +
6 files changed, 169 insertions(+), 18 deletions(-)
--
2.7.4
This patch creates a dedicated vdev subdevice for each vdev declared
in firmware resource table and associates carveout named "vdev%dbuffer"
(with %d vdev index in resource table) if any as dma coherent memory pool.
Then vdev subdevice is used as parent for virtio device.
Signed-off-by: Loic Pallardy <[email protected]>
---
drivers/remoteproc/remoteproc_core.c | 46 +++++++++++++++++++++++++++++---
drivers/remoteproc/remoteproc_internal.h | 1 +
drivers/remoteproc/remoteproc_virtio.c | 42 ++++++++++++++++++++++++++++-
include/linux/remoteproc.h | 1 +
4 files changed, 86 insertions(+), 4 deletions(-)
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 54ec38fc5dca..49272da6edd7 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -39,9 +39,11 @@
#include <linux/idr.h>
#include <linux/elf.h>
#include <linux/crc32.h>
+#include <linux/of_reserved_mem.h>
#include <linux/virtio_ids.h>
#include <linux/virtio_ring.h>
#include <asm/byteorder.h>
+#include <linux/platform_device.h>
#include "remoteproc_internal.h"
@@ -145,7 +147,7 @@ static void rproc_disable_iommu(struct rproc *rproc)
iommu_domain_free(domain);
}
-static phys_addr_t rproc_va_to_pa(void *cpu_addr)
+phys_addr_t rproc_va_to_pa(void *cpu_addr)
{
/*
* Return physical address according to virtual address location
@@ -160,6 +162,7 @@ static phys_addr_t rproc_va_to_pa(void *cpu_addr)
WARN_ON(!virt_addr_valid(cpu_addr));
return virt_to_phys(cpu_addr);
}
+EXPORT_SYMBOL(rproc_va_to_pa);
/**
* rproc_da_to_va() - lookup the kernel virtual address for a remoteproc address
@@ -423,6 +426,20 @@ static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed)
}
/**
+ * rproc_rvdev_release() - release the existence of a rvdev
+ *
+ * @dev: the subdevice's dev
+ */
+static void rproc_rvdev_release(struct device *dev)
+{
+ struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev);
+
+ of_reserved_mem_device_release(dev);
+
+ kfree(rvdev);
+}
+
+/**
* rproc_handle_vdev() - handle a vdev fw resource
* @rproc: the remote processor
* @rsc: the vring resource descriptor
@@ -455,6 +472,7 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
struct device *dev = &rproc->dev;
struct rproc_vdev *rvdev;
int i, ret;
+ char name[16];
/* make sure resource isn't truncated */
if (sizeof(*rsc) + rsc->num_of_vrings * sizeof(struct fw_rsc_vdev_vring)
@@ -488,6 +506,28 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
rvdev->rproc = rproc;
rvdev->index = rproc->nb_vdev++;
+ /* Initialise vdev subdevice */
+ snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
+ rvdev->dev.parent = rproc->dev.parent;
+ rvdev->dev.release = rproc_rvdev_release;
+ dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
+ dev_set_drvdata(&rvdev->dev, rvdev);
+
+ ret = device_register(&rvdev->dev);
+ if (ret)
+ goto free_rvdev;
+
+ /* Make device dma capable by inheriting from parent's capabilities */
+ set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent));
+
+ ret = dma_coerce_mask_and_coherent(&rvdev->dev,
+ dma_get_mask(rproc->dev.parent));
+ if (ret) {
+ dev_warn(dev,
+ "Failed to set DMA mask %llx. Trying to continue... %x\n",
+ dma_get_mask(rproc->dev.parent), ret);
+ }
+
/* parse the vrings */
for (i = 0; i < rsc->num_of_vrings; i++) {
ret = rproc_parse_vring(rvdev, rsc, i);
@@ -518,7 +558,7 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
for (i--; i >= 0; i--)
rproc_free_vring(&rvdev->vring[i]);
free_rvdev:
- kfree(rvdev);
+ device_unregister(&rvdev->dev);
return ret;
}
@@ -536,7 +576,7 @@ void rproc_vdev_release(struct kref *ref)
rproc_remove_subdev(rproc, &rvdev->subdev);
list_del(&rvdev->node);
- kfree(rvdev);
+ device_unregister(&rvdev->dev);
}
/**
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index f6cad243d7ca..bfeacfd40947 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -52,6 +52,7 @@ void rproc_free_vring(struct rproc_vring *rvring);
int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);
void *rproc_da_to_va(struct rproc *rproc, u64 da, int len);
+phys_addr_t rproc_va_to_pa(void *cpu_addr);
int rproc_trigger_recovery(struct rproc *rproc);
int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw);
diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
index de21f620b882..9ee63c0dfbc3 100644
--- a/drivers/remoteproc/remoteproc_virtio.c
+++ b/drivers/remoteproc/remoteproc_virtio.c
@@ -17,7 +17,9 @@
* GNU General Public License for more details.
*/
+#include <linux/dma-mapping.h>
#include <linux/export.h>
+#include <linux/of_reserved_mem.h>
#include <linux/remoteproc.h>
#include <linux/virtio.h>
#include <linux/virtio_config.h>
@@ -315,10 +317,48 @@ static void rproc_virtio_dev_release(struct device *dev)
int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
{
struct rproc *rproc = rvdev->rproc;
- struct device *dev = &rproc->dev;
+ struct device *dev = &rvdev->dev;
struct virtio_device *vdev = &rvdev->vdev;
+ struct rproc_mem_entry *mem;
int ret;
+ /* Try to find dedicated vdev buffer carveout */
+ mem = rproc_find_carveout_by_name(rproc, "vdev%dbuffer", rvdev->index);
+ if (mem) {
+ phys_addr_t pa;
+
+ if (mem->of_resm_idx != -1) {
+ struct device_node *np = rproc->dev.parent->of_node;
+
+ /* Associate reserved memory to vdev device */
+ ret = of_reserved_mem_device_init_by_idx(dev, np,
+ mem->of_resm_idx);
+ if (ret) {
+ dev_err(dev, "Can't associate reserved memory\n");
+ goto out;
+ }
+ } else {
+ if (mem->va) {
+ dev_warn(dev, "vdev %d buffer already mapped\n",
+ rvdev->index);
+ pa = rproc_va_to_pa(mem->va);
+ } else {
+ /* Use dma address as carveout no memmapped yet */
+ pa = (phys_addr_t)mem->dma;
+ }
+
+ /* Associate vdev buffer memory pool to vdev subdev */
+ ret = dmam_declare_coherent_memory(dev, pa,
+ mem->da,
+ mem->len,
+ DMA_MEMORY_EXCLUSIVE);
+ if (ret < 0) {
+ dev_err(dev, "Failed to associate buffer\n");
+ goto out;
+ }
+ }
+ }
+
vdev->id.device = id,
vdev->config = &rproc_virtio_config_ops,
vdev->dev.parent = dev;
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 507a2b524208..beecd8cf2eb5 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -554,6 +554,7 @@ struct rproc_vdev {
struct kref refcount;
struct rproc_subdev subdev;
+ struct device dev;
unsigned int id;
struct list_head node;
--
2.7.4
ST remote processor needs some specified memory regions for
firmware and IPC.
Memory regions are defined as reserved memory and should
be registered in remoteproc core thanks to rproc_add_carveout
function before rproc_start. For this, st rproc driver implements
prepare ops.
Signed-off-by: Loic Pallardy <[email protected]>
---
drivers/remoteproc/st_remoteproc.c | 91 +++++++++++++++++++++++++++++++++-----
1 file changed, 80 insertions(+), 11 deletions(-)
diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c
index aacef0ea3b90..51049d17b1e5 100644
--- a/drivers/remoteproc/st_remoteproc.c
+++ b/drivers/remoteproc/st_remoteproc.c
@@ -19,6 +19,7 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
@@ -91,6 +92,77 @@ static void st_rproc_kick(struct rproc *rproc, int vqid)
dev_err(dev, "failed to send message via mbox: %d\n", ret);
}
+static int st_rproc_mem_alloc(struct rproc *rproc,
+ struct rproc_mem_entry *mem)
+{
+ struct device *dev = rproc->dev.parent;
+ void *va;
+
+ va = ioremap_wc(mem->dma, mem->len);
+ if (!va) {
+ dev_err(dev, "Unable to map memory region: %pa+%zx\n",
+ &mem->dma, mem->len);
+ return -ENOMEM;
+ }
+
+ /* Update memory entry va */
+ mem->va = va;
+
+ return 0;
+}
+
+static int st_rproc_mem_release(struct rproc *rproc,
+ struct rproc_mem_entry *mem)
+{
+ iounmap(mem->va);
+
+ return 0;
+}
+
+static int st_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
+{
+ struct device *dev = rproc->dev.parent;
+ struct device_node *np = dev->of_node;
+ struct rproc_mem_entry *mem;
+ struct reserved_mem *rmem;
+ struct of_phandle_iterator it;
+ int index = 0;
+
+ of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
+ while (of_phandle_iterator_next(&it) == 0) {
+ rmem = of_reserved_mem_lookup(it.node);
+ if (!rmem) {
+ dev_err(dev, "unable to acquire memory-region\n");
+ return -EINVAL;
+ }
+
+ /* No need to map vdev buffer */
+ if (strcmp(it.node->name, "vdev0buffer")) {
+ /* Register memory region */
+ mem = rproc_mem_entry_init(dev, NULL,
+ (dma_addr_t)rmem->base,
+ rmem->size, rmem->base,
+ st_rproc_mem_alloc,
+ st_rproc_mem_release,
+ it.node->name);
+ } else {
+ /* Register reserved memory for vdev buffer allocation */
+ mem = rproc_of_resm_mem_entry_init(dev, index,
+ rmem->size,
+ rmem->base,
+ it.node->name);
+ }
+
+ if (!mem)
+ return -ENOMEM;
+
+ rproc_add_carveout(rproc, mem);
+ index++;
+ }
+
+ return rproc_elf_load_rsc_table(rproc, fw);
+}
+
static int st_rproc_start(struct rproc *rproc)
{
struct st_rproc *ddata = rproc->priv;
@@ -158,9 +230,14 @@ static int st_rproc_stop(struct rproc *rproc)
}
static const struct rproc_ops st_rproc_ops = {
- .kick = st_rproc_kick,
- .start = st_rproc_start,
- .stop = st_rproc_stop,
+ .kick = st_rproc_kick,
+ .start = st_rproc_start,
+ .stop = st_rproc_stop,
+ .parse_fw = st_rproc_parse_fw,
+ .load = rproc_elf_load_segments,
+ .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
+ .sanity_check = rproc_elf_sanity_check,
+ .get_boot_addr = rproc_elf_get_boot_addr,
};
/*
@@ -254,12 +331,6 @@ static int st_rproc_parse_dt(struct platform_device *pdev)
return -EINVAL;
}
- err = of_reserved_mem_device_init(dev);
- if (err) {
- dev_err(dev, "Failed to obtain shared memory\n");
- return err;
- }
-
err = clk_prepare(ddata->clk);
if (err)
dev_err(dev, "failed to get clock\n");
@@ -387,8 +458,6 @@ static int st_rproc_remove(struct platform_device *pdev)
clk_disable_unprepare(ddata->clk);
- of_reserved_mem_device_release(&pdev->dev);
-
for (i = 0; i < ST_RPROC_MAX_VRING * MBOX_MAX; i++)
mbox_free_channel(ddata->mbox_chan[i]);
--
2.7.4
Remoteproc is now capable to create one specific sub-device per
virtio link to associate a dedicated memory pool.
This implies to change device used by virtio_rpmsg for
buffer allocation from grand-parent to parent.
Signed-off-by: Loic Pallardy <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Tested-by: Anup Patel <[email protected]>
---
drivers/rpmsg/virtio_rpmsg_bus.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index 664f957012cd..5c892019ce89 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -912,7 +912,7 @@ static int rpmsg_probe(struct virtio_device *vdev)
total_buf_space = vrp->num_bufs * vrp->buf_size;
/* allocate coherent memory for the buffers */
- bufs_va = dma_alloc_coherent(vdev->dev.parent->parent,
+ bufs_va = dma_alloc_coherent(vdev->dev.parent,
total_buf_space, &vrp->bufs_dma,
GFP_KERNEL);
if (!bufs_va) {
@@ -980,7 +980,7 @@ static int rpmsg_probe(struct virtio_device *vdev)
return 0;
free_coherent:
- dma_free_coherent(vdev->dev.parent->parent, total_buf_space,
+ dma_free_coherent(vdev->dev.parent, total_buf_space,
bufs_va, vrp->bufs_dma);
vqs_del:
vdev->config->del_vqs(vrp->vdev);
@@ -1015,7 +1015,7 @@ static void rpmsg_remove(struct virtio_device *vdev)
vdev->config->del_vqs(vrp->vdev);
- dma_free_coherent(vdev->dev.parent->parent, total_buf_space,
+ dma_free_coherent(vdev->dev.parent, total_buf_space,
vrp->rbufs, vrp->bufs_dma);
kfree(vrp);
--
2.7.4