This driver will add a MMC clock controller driver support.
The original idea about adding a clock controller is during the
discussion in the NAND driver mainline effort[1].
This driver is tested in the S400 board (AXG platform) with NAND driver.
Changes since v7 [8]
- move meson_clk_get_phase_delay_data() from header to driver
- CONFIG sclk-div with COMMON_CLK_AMLOGIC instead of COMMON_CLK_AMLOGIC_AUDIO
- remove onecell date and ID for internal MUX clk
- use helper for functions for ONE_BASED in sclk-div
- add ONE_BASED support for duty cycle
Changes since v6 [7]:
- add one based support for sclk divier
- alloc sclk in probe for multiple instance
- fix coding styles
Changes since v5 [6]:
- remove divider ops with .init and use sclk_div instead
- drop CLK_DIVIDER_ROUND_CLOSEST in mux and div
- drop the useless type cast
Changes since v4 [5]:
- use struct parm in phase delay driver
- remove 0 delay releted part in phase delay driver
- don't rebuild the parent name once again
- add divider ops with .init
Changes since v3 [4]:
- separate clk-phase-delay driver
- replace clk_get_rate() with clk_hw_get_rate()
- collect Rob's R-Y
- drop 'meson-' prefix from compatible string
Changes since v2 [3]:
- squash dt-binding clock-id patch
- update license
- fix alignment
- construct a clk register helper() function
Changes since v1 [2]:
- implement phase clock
- update compatible name
- adjust file name
- divider probe() into small functions, and re-use them
[1] https://lkml.kernel.org/r/20180628090034.0637a062@xps13
[2] https://lkml.kernel.org/r/[email protected]
[3] https://lkml.kernel.org/r/[email protected]
[4] https://lkml.kernel.org/r/[email protected]
[5] https://lkml.kernel.org/r/[email protected]
[6] https://lkml.kernel.org/r/[email protected]
[7] https://lkml.kernel.org/r/[email protected]
[8] https://lkml.kernel.org/r/[email protected]
Jianxin Pan (1):
clk: meson: add one based divider support for sclk divider
Yixun Lan (3):
clk: meson: add emmc sub clock phase delay driver
clk: meson: add DT documentation for emmc clock controller
clk: meson: add sub MMC clock controller driver
.../devicetree/bindings/clock/amlogic,mmc-clkc.txt | 39 +++
drivers/clk/meson/Kconfig | 9 +
drivers/clk/meson/Makefile | 5 +-
drivers/clk/meson/clk-phase-delay.c | 73 +++++
drivers/clk/meson/clkc-audio.h | 8 -
drivers/clk/meson/clkc.h | 17 +-
drivers/clk/meson/mmc-clkc.c | 304 +++++++++++++++++++++
drivers/clk/meson/sclk-div.c | 59 ++--
include/dt-bindings/clock/amlogic,mmc-clkc.h | 17 ++
9 files changed, 501 insertions(+), 30 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt
create mode 100644 drivers/clk/meson/clk-phase-delay.c
create mode 100644 drivers/clk/meson/mmc-clkc.c
create mode 100644 include/dt-bindings/clock/amlogic,mmc-clkc.h
--
1.9.1
When CLK_DIVIDER_ONE_BASED flag is set, the sclk divider will be:
one based divider (div = val), and zero value gates the clock
Signed-off-by: Jianxin Pan <[email protected]>
---
drivers/clk/meson/Makefile | 3 ++-
drivers/clk/meson/clkc-audio.h | 8 ------
drivers/clk/meson/clkc.h | 10 ++++++-
drivers/clk/meson/sclk-div.c | 59 ++++++++++++++++++++++++++++--------------
4 files changed, 50 insertions(+), 30 deletions(-)
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index a849aa8..acd8694 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -4,7 +4,8 @@
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o vid-pll-div.o
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-input.o
-obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o sclk-div.o
+obj-$(CONFIG_COMMON_CLK_AMLOGIC) += sclk-div.o
+obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o
obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
diff --git a/drivers/clk/meson/clkc-audio.h b/drivers/clk/meson/clkc-audio.h
index 0a7c157..286ff12 100644
--- a/drivers/clk/meson/clkc-audio.h
+++ b/drivers/clk/meson/clkc-audio.h
@@ -15,14 +15,6 @@ struct meson_clk_triphase_data {
struct parm ph2;
};
-struct meson_sclk_div_data {
- struct parm div;
- struct parm hi;
- unsigned int cached_div;
- struct clk_duty cached_duty;
-};
-
extern const struct clk_ops meson_clk_triphase_ops;
-extern const struct clk_ops meson_sclk_div_ops;
#endif /* __MESON_CLKC_AUDIO_H */
diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index 6183b22..00b3320 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -27,6 +27,14 @@ struct parm {
u8 width;
};
+struct meson_sclk_div_data {
+ struct parm div;
+ struct parm hi;
+ unsigned int cached_div;
+ struct clk_duty cached_duty;
+ u8 flags;
+};
+
static inline unsigned int meson_parm_read(struct regmap *map, struct parm *p)
{
unsigned int val;
@@ -118,10 +126,10 @@ struct clk_regmap _name = { \
extern const struct clk_ops meson_clk_mpll_ops;
extern const struct clk_ops meson_clk_phase_ops;
extern const struct clk_ops meson_vid_pll_div_ro_ops;
+extern const struct clk_ops meson_sclk_div_ops;
struct clk_hw *meson_clk_hw_register_input(struct device *dev,
const char *of_name,
const char *clk_name,
unsigned long flags);
-
#endif /* __CLKC_H */
diff --git a/drivers/clk/meson/sclk-div.c b/drivers/clk/meson/sclk-div.c
index bc64019..a6c425b 100644
--- a/drivers/clk/meson/sclk-div.c
+++ b/drivers/clk/meson/sclk-div.c
@@ -4,42 +4,60 @@
* Author: Jerome Brunet <[email protected]>
*
* Sample clock generator divider:
- * This HW divider gates with value 0 but is otherwise a zero based divider:
+ * This HW divider gates with value 0
*
* val >= 1
- * divider = val + 1
+ * divider = val + 1 if ONE_BASED is not set, otherwise divider = val.
*
* The duty cycle may also be set for the LR clock variant. The duty cycle
* ratio is:
*
* hi = [0 - val]
- * duty_cycle = (1 + hi) / (1 + val)
+ * duty_cycle = (1 + hi) / (1 + val) if ONE_BASED is not set, otherwise:
+ * duty_cycle = hi / (1 + val)
*/
-#include "clkc-audio.h"
+#include "clkc.h"
-static inline struct meson_sclk_div_data *
-meson_sclk_div_data(struct clk_regmap *clk)
+static inline int get_reg(int val, unsigned char flag)
{
- return (struct meson_sclk_div_data *)clk->data;
+ WARN_ON(val < 1);
+ if ((flag & CLK_DIVIDER_ONE_BASED) || !val)
+ return val;
+ else
+ return val - 1;
+}
+
+static inline int get_value(int reg, unsigned char flag)
+{
+ if (flag & CLK_DIVIDER_ONE_BASED)
+ return reg;
+ else
+ return reg + 1;
}
-static int sclk_div_maxval(struct meson_sclk_div_data *sclk)
+static inline struct meson_sclk_div_data *
+meson_sclk_div_data(struct clk_regmap *clk)
{
- return (1 << sclk->div.width) - 1;
+ return (struct meson_sclk_div_data *)clk->data;
}
static int sclk_div_maxdiv(struct meson_sclk_div_data *sclk)
{
- return sclk_div_maxval(sclk) + 1;
+ unsigned int reg = clk_div_mask(sclk->div.width);
+
+ return get_value(reg, sclk->flags);
}
static int sclk_div_getdiv(struct clk_hw *hw, unsigned long rate,
unsigned long prate, int maxdiv)
{
int div = DIV_ROUND_CLOSEST_ULL((u64)prate, rate);
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
+ int mindiv = get_value(1, sclk->flags);
- return clamp(div, 2, maxdiv);
+ return clamp(div, mindiv, maxdiv);
}
static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
@@ -47,7 +65,7 @@ static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
struct meson_sclk_div_data *sclk)
{
struct clk_hw *parent = clk_hw_get_parent(hw);
- int bestdiv = 0, i;
+ int bestdiv = 0, i, mindiv;
unsigned long maxdiv, now, parent_now;
unsigned long best = 0, best_parent = 0;
@@ -64,8 +82,9 @@ static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
* unsigned long in rate * i below
*/
maxdiv = min(ULONG_MAX / rate, maxdiv);
+ mindiv = get_value(1, sclk->flags);
- for (i = 2; i <= maxdiv; i++) {
+ for (i = mindiv; i <= maxdiv; i++) {
/*
* It's the most ideal case if the requested rate can be
* divided from parent clock without needing to change
@@ -111,10 +130,7 @@ static void sclk_apply_ratio(struct clk_regmap *clk,
sclk->cached_duty.num,
sclk->cached_duty.den);
- if (hi)
- hi -= 1;
-
- meson_parm_write(clk->map, &sclk->hi, hi);
+ meson_parm_write(clk->map, &sclk->hi, get_reg(hi, sclk->flags));
}
static int sclk_div_set_duty_cycle(struct clk_hw *hw,
@@ -145,7 +161,7 @@ static int sclk_div_get_duty_cycle(struct clk_hw *hw,
}
hi = meson_parm_read(clk->map, &sclk->hi);
- duty->num = hi + 1;
+ duty->num = get_value(hi, sclk->flags);
duty->den = sclk->cached_div;
return 0;
}
@@ -153,10 +169,13 @@ static int sclk_div_get_duty_cycle(struct clk_hw *hw,
static void sclk_apply_divider(struct clk_regmap *clk,
struct meson_sclk_div_data *sclk)
{
+ unsigned int div;
+
if (MESON_PARM_APPLICABLE(&sclk->hi))
sclk_apply_ratio(clk, sclk);
- meson_parm_write(clk->map, &sclk->div, sclk->cached_div - 1);
+ div = get_reg(sclk->cached_div, sclk->flags);
+ meson_parm_write(clk->map, &sclk->div, div);
}
static int sclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -224,7 +243,7 @@ static void sclk_div_init(struct clk_hw *hw)
if (!val)
sclk->cached_div = sclk_div_maxdiv(sclk);
else
- sclk->cached_div = val + 1;
+ sclk->cached_div = get_value(val, sclk->flags);
sclk_div_get_duty_cycle(hw, &sclk->cached_duty);
}
--
1.9.1
From: Yixun Lan <[email protected]>
Document the MMC sub clock controller driver, the potential consumer
of this driver is MMC or NAND. Also add four clock bindings IDs which
provided by this driver.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Yixun Lan <[email protected]>
Signed-off-by: Jianxin Pan <[email protected]>
---
.../devicetree/bindings/clock/amlogic,mmc-clkc.txt | 39 ++++++++++++++++++++++
include/dt-bindings/clock/amlogic,mmc-clkc.h | 17 ++++++++++
2 files changed, 56 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt
create mode 100644 include/dt-bindings/clock/amlogic,mmc-clkc.h
diff --git a/Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt
new file mode 100644
index 0000000..0f518e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt
@@ -0,0 +1,39 @@
+* Amlogic MMC Sub Clock Controller Driver
+
+The Amlogic MMC clock controller generates and supplies clock to support
+MMC and NAND controller
+
+Required Properties:
+
+- compatible: should be:
+ "amlogic,gx-mmc-clkc"
+ "amlogic,axg-mmc-clkc"
+
+- #clock-cells: should be 1.
+- clocks: phandles to clocks corresponding to the clock-names property
+- clock-names: list of parent clock names
+ - "clkin0", "clkin1"
+
+- reg: address of emmc sub clock register
+
+Example: Clock controller node:
+
+sd_mmc_c_clkc: clock-controller@7000 {
+ compatible = "amlogic,axg-mmc-clkc", "syscon";
+ reg = <0x0 0x7000 0x0 0x4>;
+ #clock-cells = <1>;
+
+ clock-names = "clkin0", "clkin1";
+ clocks = <&clkc CLKID_SD_MMC_C_CLK0>,
+ <&clkc CLKID_FCLK_DIV2>;
+};
+
+sd_emmc_b_clkc: clock-controller@5000 {
+ compatible = "amlogic,axg-mmc-clkc", "syscon";
+ reg = <0x0 0x5000 0x0 0x4>;
+
+ #clock-cells = <1>;
+ clock-names = "clkin0", "clkin1";
+ clocks = <&clkc CLKID_SD_EMMC_B_CLK0>,
+ <&clkc CLKID_FCLK_DIV2>;
+};
diff --git a/include/dt-bindings/clock/amlogic,mmc-clkc.h b/include/dt-bindings/clock/amlogic,mmc-clkc.h
new file mode 100644
index 0000000..34a3c56
--- /dev/null
+++ b/include/dt-bindings/clock/amlogic,mmc-clkc.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Meson MMC sub clock tree IDs
+ *
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ * Author: Yixun Lan <[email protected]>
+ */
+
+#ifndef __MMC_CLKC_H
+#define __MMC_CLKC_H
+
+#define CLKID_MMC_DIV 0
+#define CLKID_MMC_PHASE_CORE 1
+#define CLKID_MMC_PHASE_TX 2
+#define CLKID_MMC_PHASE_RX 3
+
+#endif
--
1.9.1
From: Yixun Lan <[email protected]>
Export the emmc sub clock phase delay ops which will be used
by the emmc sub clock driver itself.
Signed-off-by: Yixun Lan <[email protected]>
Signed-off-by: Jianxin Pan <[email protected]>
---
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/clk-phase-delay.c | 73 +++++++++++++++++++++++++++++++++++++
drivers/clk/meson/clkc.h | 7 ++++
3 files changed, 81 insertions(+)
create mode 100644 drivers/clk/meson/clk-phase-delay.c
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index acd8694..d59620d 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o vid-pll-div.o
+obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-phase-delay.o
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-input.o
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += sclk-div.o
obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o
diff --git a/drivers/clk/meson/clk-phase-delay.c b/drivers/clk/meson/clk-phase-delay.c
new file mode 100644
index 0000000..a6e6600
--- /dev/null
+++ b/drivers/clk/meson/clk-phase-delay.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Amlogic Meson MMC Sub Clock Controller Driver
+ *
+ * Copyright (c) 2017 Baylibre SAS.
+ * Author: Jerome Brunet <[email protected]>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Yixun Lan <[email protected]>
+ * Author: Jianxin Pan <[email protected]>
+ */
+
+#include <linux/clk-provider.h>
+#include "clkc.h"
+
+static inline struct meson_clk_phase_delay_data *
+meson_clk_get_phase_delay_data(struct clk_regmap *clk)
+{
+ return clk->data;
+}
+
+static int meson_clk_phase_delay_get_phase(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_clk_phase_delay_data *ph;
+ unsigned long period_ps, p, d;
+ int degrees;
+
+ ph = meson_clk_get_phase_delay_data(clk);
+ p = meson_parm_read(clk->map, &ph->phase);
+ degrees = p * 360 / (1 << (ph->phase.width));
+
+ period_ps = DIV_ROUND_UP_ULL(NSEC_PER_SEC * 1000ull,
+ clk_hw_get_rate(hw));
+
+ d = meson_parm_read(clk->map, &ph->delay);
+ degrees += d * ph->delay_step_ps * 360 / period_ps;
+ degrees %= 360;
+
+ return degrees;
+}
+
+static int meson_clk_phase_delay_set_phase(struct clk_hw *hw, int degrees)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_clk_phase_delay_data *ph;
+ unsigned long period_ps, d = 0;
+ unsigned int p;
+
+ ph = meson_clk_get_phase_delay_data(clk);
+ period_ps = DIV_ROUND_UP_ULL(NSEC_PER_SEC * 1000ull,
+ clk_hw_get_rate(hw));
+
+ /*
+ * First compute the phase index (p), the remainder (r) is the
+ * part we'll try to acheive using the delays (d).
+ */
+ p = 360 / 1 << (ph->phase.width);
+ degrees = degrees / p;
+ d = DIV_ROUND_CLOSEST((degrees % p) * period_ps,
+ 360 * ph->delay_step_ps);
+ d = min(d, PMASK(ph->delay.width));
+
+ meson_parm_write(clk->map, &ph->phase, degrees);
+ meson_parm_write(clk->map, &ph->delay, d);
+ return 0;
+}
+
+const struct clk_ops meson_clk_phase_delay_ops = {
+ .get_phase = meson_clk_phase_delay_get_phase,
+ .set_phase = meson_clk_phase_delay_set_phase,
+};
+EXPORT_SYMBOL_GPL(meson_clk_phase_delay_ops);
diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index 00b3320..e6f0905 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -118,6 +118,12 @@ struct clk_regmap _name = { \
}, \
};
+struct meson_clk_phase_delay_data {
+ struct parm phase;
+ struct parm delay;
+ unsigned int delay_step_ps;
+};
+
/* clk_ops */
extern const struct clk_ops meson_clk_pll_ro_ops;
extern const struct clk_ops meson_clk_pll_ops;
@@ -127,6 +133,7 @@ struct clk_regmap _name = { \
extern const struct clk_ops meson_clk_phase_ops;
extern const struct clk_ops meson_vid_pll_div_ro_ops;
extern const struct clk_ops meson_sclk_div_ops;
+extern const struct clk_ops meson_clk_phase_delay_ops;
struct clk_hw *meson_clk_hw_register_input(struct device *dev,
const char *of_name,
--
1.9.1
From: Yixun Lan <[email protected]>
The patch will add a MMC clock controller driver which used by MMC or NAND,
It provide a mux and divider clock, and three phase clocks - core, tx, tx.
Two clocks are provided as the parent of MMC clock controller from
upper layer clock controller - eg "amlogic,axg-clkc" in AXG platform.
To specify which clock the MMC or NAND driver may consume,
the preprocessor macros in the dt-bindings/clock/amlogic,mmc-clkc.h header
can be used in the device tree sources.
Signed-off-by: Yixun Lan <[email protected]>
Signed-off-by: Jianxin Pan <[email protected]>
---
drivers/clk/meson/Kconfig | 9 ++
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/mmc-clkc.c | 304 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 314 insertions(+)
create mode 100644 drivers/clk/meson/mmc-clkc.c
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index efaa70f..c84b0f7 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -15,6 +15,15 @@ config COMMON_CLK_MESON_AO
select COMMON_CLK_REGMAP_MESON
select RESET_CONTROLLER
+config COMMON_CLK_MMC_MESON
+ tristate "Meson MMC Sub Clock Controller Driver"
+ select MFD_SYSCON
+ select COMMON_CLK_AMLOGIC
+ help
+ Support for the MMC sub clock controller on Amlogic Meson Platform,
+ which include S905 (GXBB, GXL), A113D/X (AXG) devices.
+ Say Y if you want this clock enabled.
+
config COMMON_CLK_REGMAP_MESON
bool
select REGMAP
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index d59620d..54416a2 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -12,4 +12,5 @@ obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
+obj-$(CONFIG_COMMON_CLK_MMC_MESON) += mmc-clkc.o
obj-$(CONFIG_COMMON_CLK_REGMAP_MESON) += clk-regmap.o
diff --git a/drivers/clk/meson/mmc-clkc.c b/drivers/clk/meson/mmc-clkc.c
new file mode 100644
index 0000000..2582a98
--- /dev/null
+++ b/drivers/clk/meson/mmc-clkc.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Amlogic Meson MMC Sub Clock Controller Driver
+ *
+ * Copyright (c) 2017 Baylibre SAS.
+ * Author: Jerome Brunet <[email protected]>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Yixun Lan <[email protected]>
+ * Author: Jianxin Pan <[email protected]>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/amlogic,mmc-clkc.h>
+
+#include "clkc.h"
+
+/* clock ID used by internal driver */
+
+#define SD_EMMC_CLOCK 0
+#define CLK_DELAY_STEP_PS 200
+#define MUX_CLK_NUM_PARENTS 2
+#define MMC_MAX_CLKS 4
+
+struct mmc_clkc_data {
+ struct meson_clk_phase_delay_data tx;
+ struct meson_clk_phase_delay_data rx;
+};
+
+static struct clk_regmap_mux_data mmc_clkc_mux_data = {
+ .offset = SD_EMMC_CLOCK,
+ .mask = 0x3,
+ .shift = 6,
+};
+
+static const struct meson_sclk_div_data mmc_clkc_div_data = {
+ .div = {
+ .reg_off = SD_EMMC_CLOCK,
+ .width = 6,
+ },
+ .flags = CLK_DIVIDER_ONE_BASED,
+};
+
+static struct meson_clk_phase_data mmc_clkc_core_phase = {
+ .ph = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 8,
+ .width = 2,
+ }
+};
+
+static const struct mmc_clkc_data mmc_clkc_gx_data = {
+ .tx = {
+ .phase = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 10,
+ .width = 2,
+ },
+ .delay = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 16,
+ .width = 4,
+ },
+ .delay_step_ps = CLK_DELAY_STEP_PS,
+ },
+ .rx = {
+ .phase = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 12,
+ .width = 2,
+ },
+ .delay = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 20,
+ .width = 4,
+ },
+ .delay_step_ps = CLK_DELAY_STEP_PS,
+ },
+};
+
+static const struct mmc_clkc_data mmc_clkc_axg_data = {
+ .tx = {
+ .phase = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 10,
+ .width = 2,
+ },
+ .delay = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 16,
+ .width = 6,
+ },
+ .delay_step_ps = CLK_DELAY_STEP_PS,
+ },
+ .rx = {
+ .phase = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 12,
+ .width = 2,
+ },
+ .delay = {
+ .reg_off = SD_EMMC_CLOCK,
+ .shift = 22,
+ .width = 6,
+ },
+ .delay_step_ps = CLK_DELAY_STEP_PS,
+ },
+};
+
+static const struct of_device_id mmc_clkc_match_table[] = {
+ {
+ .compatible = "amlogic,gx-mmc-clkc",
+ .data = &mmc_clkc_gx_data
+ },
+ {
+ .compatible = "amlogic,axg-mmc-clkc",
+ .data = &mmc_clkc_axg_data
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mmc_clkc_match_table);
+
+static struct clk_regmap *
+mmc_clkc_register_clk(struct device *dev, struct regmap *map,
+ struct clk_init_data *init,
+ const char *suffix, void *data)
+{
+ struct clk_regmap *clk;
+ char *name;
+ int ret;
+
+ clk = devm_kzalloc(dev, sizeof(*clk), GFP_KERNEL);
+ if (!clk)
+ return ERR_PTR(-ENOMEM);
+
+ name = kasprintf(GFP_KERNEL, "%s#%s", dev_name(dev), suffix);
+ if (!name)
+ return ERR_PTR(-ENOMEM);
+
+ init->name = name;
+ clk->map = map;
+ clk->data = data;
+ clk->hw.init = init;
+ ret = devm_clk_hw_register(dev, &clk->hw);
+ if (ret)
+ clk = ERR_PTR(ret);
+
+ kfree(name);
+ return clk;
+}
+
+static struct clk_regmap *mmc_clkc_register_mux(struct device *dev,
+ struct regmap *map)
+{
+ const char *parent_names[MUX_CLK_NUM_PARENTS];
+ struct clk_init_data init;
+ struct clk_regmap *mux;
+ struct clk *clk;
+ int i;
+
+ for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
+ char name[8];
+
+ snprintf(name, sizeof(name), "clkin%d", i);
+ clk = devm_clk_get(dev, name);
+ if (IS_ERR(clk)) {
+ if (clk != ERR_PTR(-EPROBE_DEFER))
+ dev_err(dev, "Missing clock %s\n", name);
+ return ERR_CAST(clk);
+ }
+
+ parent_names[i] = __clk_get_name(clk);
+ }
+
+ init.ops = &clk_regmap_mux_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_names;
+ init.num_parents = MUX_CLK_NUM_PARENTS;
+
+ mux = mmc_clkc_register_clk(dev, map, &init, "mux", &mmc_clkc_mux_data);
+ if (IS_ERR(mux))
+ dev_err(dev, "Mux clock registration failed\n");
+
+ return mux;
+}
+
+static struct clk_regmap *
+mmc_clkc_register_clk_with_parent(struct device *dev, struct regmap *map,
+ char *suffix, const struct clk_hw *hw,
+ unsigned long flags,
+ const struct clk_ops *ops, void *data)
+{
+ struct clk_init_data init;
+ struct clk_regmap *clk;
+ const char *parent_name = clk_hw_get_name(hw);
+
+ init.ops = ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = mmc_clkc_register_clk(dev, map, &init, suffix, data);
+ if (IS_ERR(clk))
+ dev_err(dev, "%s clock registration failed\n", suffix);
+
+ return clk;
+}
+
+static int mmc_clkc_probe(struct platform_device *pdev)
+{
+ struct clk_hw_onecell_data *onecell_data;
+ struct device *dev = &pdev->dev;
+ struct mmc_clkc_data *data;
+ struct regmap *map;
+ struct clk_regmap *clk, *core;
+ struct meson_sclk_div_data *div_data;
+
+ /*cast to drop the const in match->data*/
+ data = (struct mmc_clkc_data *)of_device_get_match_data(dev);
+ if (!data)
+ return -ENODEV;
+
+ map = syscon_node_to_regmap(dev->of_node);
+ if (IS_ERR(map)) {
+ dev_err(dev, "could not find mmc clock controller\n");
+ return PTR_ERR(map);
+ }
+
+ onecell_data = devm_kzalloc(dev, sizeof(*onecell_data) +
+ sizeof(*onecell_data->hws) * MMC_MAX_CLKS,
+ GFP_KERNEL);
+ if (!onecell_data)
+ return -ENOMEM;
+
+ clk = mmc_clkc_register_mux(dev, map);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ div_data = devm_kzalloc(dev, sizeof(*div_data), GFP_KERNEL);
+ if (!div_data)
+ return -ENOMEM;
+
+ memcpy(div_data, &mmc_clkc_div_data, sizeof(*div_data));
+ clk = mmc_clkc_register_clk_with_parent(dev, map, "div",
+ &clk->hw,
+ CLK_SET_RATE_PARENT,
+ &meson_sclk_div_ops,
+ div_data);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ onecell_data->hws[CLKID_MMC_DIV] = &clk->hw,
+
+ core = mmc_clkc_register_clk_with_parent(dev, map, "core",
+ &clk->hw,
+ CLK_SET_RATE_PARENT,
+ &meson_clk_phase_ops,
+ &mmc_clkc_core_phase);
+ if (IS_ERR(core))
+ return PTR_ERR(core);
+
+ onecell_data->hws[CLKID_MMC_PHASE_CORE] = &core->hw,
+
+ clk = mmc_clkc_register_clk_with_parent(dev, map, "rx",
+ &core->hw, 0,
+ &meson_clk_phase_delay_ops,
+ &data->rx);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ onecell_data->hws[CLKID_MMC_PHASE_RX] = &clk->hw,
+ clk = mmc_clkc_register_clk_with_parent(dev, map, "tx",
+ &core->hw, 0,
+ &meson_clk_phase_delay_ops,
+ &data->tx);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ onecell_data->hws[CLKID_MMC_PHASE_TX] = &clk->hw,
+ onecell_data->num = MMC_MAX_CLKS;
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ onecell_data);
+}
+
+static struct platform_driver mmc_clkc_driver = {
+ .probe = mmc_clkc_probe,
+ .driver = {
+ .name = "meson-mmc-clkc",
+ .of_match_table = of_match_ptr(mmc_clkc_match_table),
+ },
+};
+
+module_platform_driver(mmc_clkc_driver);
+
+MODULE_DESCRIPTION("Amlogic AXG MMC clock driver");
+MODULE_AUTHOR("Jianxin Pan <[email protected]>");
+MODULE_LICENSE("GPL v2");
--
1.9.1
Hi Yixun,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on clk/clk-next]
[also build test ERROR on next-20181224]
[cannot apply to v4.20]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Jianxin-Pan/clk-meson-add-a-sub-EMMC-clock-controller-support/20181222-060947
base: https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next
config: i386-randconfig-x079-12301332 (attached as .config)
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
reproduce:
# save the attached .config to linux build tree
make ARCH=i386
All errors (new ones prefixed by >>):
>> ERROR: "clk_regmap_mux_ops" [drivers/clk/meson/mmc-clkc.ko] undefined!
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
Hi Yixun,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on clk/clk-next]
[also build test ERROR on next-20181224]
[cannot apply to v4.20]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Jianxin-Pan/clk-meson-add-a-sub-EMMC-clock-controller-support/20181222-060947
base: https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next
config: i386-randconfig-s0-12301806 (attached as .config)
compiler: gcc-6 (Debian 6.4.0-9) 6.4.0 20171026
reproduce:
# save the attached .config to linux build tree
make ARCH=i386
All errors (new ones prefixed by >>):
drivers/clk/meson/mmc-clkc.o: In function `mmc_clkc_register_mux':
>> drivers/clk/meson/mmc-clkc.c:182: undefined reference to `clk_regmap_mux_ops'
vim +182 drivers/clk/meson/mmc-clkc.c
158
159 static struct clk_regmap *mmc_clkc_register_mux(struct device *dev,
160 struct regmap *map)
161 {
162 const char *parent_names[MUX_CLK_NUM_PARENTS];
163 struct clk_init_data init;
164 struct clk_regmap *mux;
165 struct clk *clk;
166 int i;
167
168 for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
169 char name[8];
170
171 snprintf(name, sizeof(name), "clkin%d", i);
172 clk = devm_clk_get(dev, name);
173 if (IS_ERR(clk)) {
174 if (clk != ERR_PTR(-EPROBE_DEFER))
175 dev_err(dev, "Missing clock %s\n", name);
176 return ERR_CAST(clk);
177 }
178
179 parent_names[i] = __clk_get_name(clk);
180 }
181
> 182 init.ops = &clk_regmap_mux_ops;
183 init.flags = CLK_SET_RATE_PARENT;
184 init.parent_names = parent_names;
185 init.num_parents = MUX_CLK_NUM_PARENTS;
186
187 mux = mmc_clkc_register_clk(dev, map, &init, "mux", &mmc_clkc_mux_data);
188 if (IS_ERR(mux))
189 dev_err(dev, "Mux clock registration failed\n");
190
191 return mux;
192 }
193
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation