Add PCIe Root Port support for Stratix10 device and also update
device tree binding documentation.
v1 -> v2:
---------
- Add define S10_TLP_FMTTYPE_* macros.
- Remove initialize structure members to NULL/zero.
- Rename *_funcs to *_data.
- Update comment and fix coding style warning from checkpatch.pl.
- Rename StratixXX to stratix10.
History:
--------
[v1]: https://lkml.org/lkml/2018/12/26/68
Ley Foon Tan (2):
pci: altera: Add Stratix10 PCIe support
Documentation: dt-bindings: pci: altera: Add altr,pcie-root-port-2.0
.../devicetree/bindings/pci/altera-pcie.txt | 4 +-
drivers/pci/controller/Kconfig | 2 +-
drivers/pci/controller/pcie-altera.c | 240 ++++++++++++++++++--
3 files changed, 220 insertions(+), 26 deletions(-)
Add PCIe Root Port support for Stratix10 device.
Main differences:
- HIP interface to access Root Port configuration register.
- TLP programming flow:
- One REG0 register
- Don't need to check alignment
Signed-off-by: Ley Foon Tan <[email protected]>
---
drivers/pci/controller/Kconfig | 2 +-
drivers/pci/controller/pcie-altera.c | 240 ++++++++++++++++++++++++++++++----
2 files changed, 217 insertions(+), 25 deletions(-)
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 6671946..6012f30 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -175,7 +175,7 @@ config PCIE_IPROC_MSI
config PCIE_ALTERA
bool "Altera PCIe controller"
- depends on ARM || NIOS2 || COMPILE_TEST
+ depends on ARM || NIOS2 || ARM64 || COMPILE_TEST
help
Say Y here if you want to enable PCIe controller support on Altera
FPGA.
diff --git a/drivers/pci/controller/pcie-altera.c b/drivers/pci/controller/pcie-altera.c
index 7d05e51..385b822 100644
--- a/drivers/pci/controller/pcie-altera.c
+++ b/drivers/pci/controller/pcie-altera.c
@@ -11,6 +11,7 @@
#include <linux/irqchip/chained_irq.h>
#include <linux/init.h>
#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_pci.h>
#include <linux/pci.h>
@@ -37,7 +38,12 @@
#define RP_LTSSM_MASK 0x1f
#define LTSSM_L0 0xf
-#define PCIE_CAP_OFFSET 0x80
+#define S10_RP_TX_CNTRL 0x2004
+#define S10_RP_RXCPL_REG 0x2008
+#define S10_RP_RXCPL_STATUS 0x200C
+#define S10_RP_CFG_ADDR(pcie, reg) \
+ (((pcie)->hip_base) + (reg) + (1 << 20))
+
/* TLP configuration type 0 and 1 */
#define TLP_FMTTYPE_CFGRD0 0x04 /* Configuration Read Type 0 */
#define TLP_FMTTYPE_CFGWR0 0x44 /* Configuration Write Type 0 */
@@ -49,18 +55,19 @@
#define RP_DEVFN 0
#define TLP_REQ_ID(bus, devfn) (((bus) << 8) | (devfn))
#define TLP_CFGRD_DW0(pcie, bus) \
- ((((bus == pcie->root_bus_nr) ? TLP_FMTTYPE_CFGRD0 \
- : TLP_FMTTYPE_CFGRD1) << 24) | \
- TLP_PAYLOAD_SIZE)
+ ((((bus == pcie->root_bus_nr) ? pcie->pcie_data->cfgrd0 \
+ : pcie->pcie_data->cfgrd1) << 24) | \
+ TLP_PAYLOAD_SIZE)
#define TLP_CFGWR_DW0(pcie, bus) \
- ((((bus == pcie->root_bus_nr) ? TLP_FMTTYPE_CFGWR0 \
- : TLP_FMTTYPE_CFGWR1) << 24) | \
- TLP_PAYLOAD_SIZE)
+ ((((bus == pcie->root_bus_nr) ? pcie->pcie_data->cfgwr0 \
+ : pcie->pcie_data->cfgwr1) << 24) | \
+ TLP_PAYLOAD_SIZE)
#define TLP_CFG_DW1(pcie, tag, be) \
- (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag << 8) | (be))
+ (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag << 8) | (be))
#define TLP_CFG_DW2(bus, devfn, offset) \
(((bus) << 24) | ((devfn) << 16) | (offset))
#define TLP_COMP_STATUS(s) (((s) >> 13) & 7)
+#define TLP_BYTE_COUNT(s) (((s) >> 0) & 0xfff)
#define TLP_HDR_SIZE 3
#define TLP_LOOP 500
@@ -69,14 +76,38 @@
#define DWORD_MASK 3
+#define S10_TLP_FMTTYPE_CFGRD0 0x05
+#define S10_TLP_FMTTYPE_CFGRD1 0x04
+#define S10_TLP_FMTTYPE_CFGWR0 0x45
+#define S10_TLP_FMTTYPE_CFGWR1 0x44
+
struct altera_pcie {
struct platform_device *pdev;
- void __iomem *cra_base; /* DT Cra */
+ void __iomem *cra_base;
+ void __iomem *hip_base;
int irq;
u8 root_bus_nr;
struct irq_domain *irq_domain;
struct resource bus_range;
struct list_head resources;
+ const struct altera_pcie_data *pcie_data;
+};
+
+struct altera_pcie_data {
+ int (*tlp_read_pkt)(struct altera_pcie *pcie, u32 *value);
+ void (*tlp_write_pkt)(struct altera_pcie *pcie, u32 *headers,
+ u32 data, bool align);
+ bool (*get_link_status)(struct altera_pcie *pcie);
+ int (*rp_read_cfg)(struct altera_pcie *pcie, int where,
+ int size, u32 *value);
+ int (*rp_write_cfg)(struct altera_pcie *pcie, u8 bus, int where,
+ int size, u32 value);
+ bool s10_flag; /* Stratix 10 */
+ u32 cap_offset; /* PCIe capability structure register offset */
+ u32 cfgrd0;
+ u32 cfgrd1;
+ u32 cfgwr0;
+ u32 cfgwr1;
};
struct tlp_rp_regpair_t {
@@ -101,6 +132,15 @@ static bool altera_pcie_link_up(struct altera_pcie *pcie)
return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) == LTSSM_L0);
}
+static bool s10_altera_pcie_link_up(struct altera_pcie *pcie)
+{
+ void __iomem *addr = S10_RP_CFG_ADDR(pcie,
+ pcie->pcie_data->cap_offset +
+ PCI_EXP_LNKSTA);
+
+ return !!(readw(addr) & PCI_EXP_LNKSTA_DLLLA);
+}
+
/*
* Altera PCIe port uses BAR0 of RC's configuration space as the translation
* from PCI bus to native BUS. Entire DDR region is mapped into PCIe space
@@ -128,12 +168,18 @@ static void tlp_write_tx(struct altera_pcie *pcie,
cra_writel(pcie, tlp_rp_regdata->ctrl, RP_TX_CNTRL);
}
+static void s10_tlp_write_tx(struct altera_pcie *pcie, u32 reg0, u32 ctrl)
+{
+ cra_writel(pcie, reg0, RP_TX_REG0);
+ cra_writel(pcie, ctrl, S10_RP_TX_CNTRL);
+}
+
static bool altera_pcie_valid_device(struct altera_pcie *pcie,
struct pci_bus *bus, int dev)
{
/* If there is no link, then there is no device */
if (bus->number != pcie->root_bus_nr) {
- if (!altera_pcie_link_up(pcie))
+ if (!pcie->pcie_data->get_link_status(pcie))
return false;
}
@@ -183,6 +229,46 @@ static int tlp_read_packet(struct altera_pcie *pcie, u32 *value)
return PCIBIOS_DEVICE_NOT_FOUND;
}
+static int s10_tlp_read_packet(struct altera_pcie *pcie, u32 *value)
+{
+ int i;
+ u32 ctrl;
+ u32 comp_status;
+ u32 dw[4];
+ u32 count = 0;
+
+ for (i = 0; i < TLP_LOOP; i++) {
+ ctrl = cra_readl(pcie, S10_RP_RXCPL_STATUS);
+ if (!(ctrl & RP_RXCPL_SOP))
+ continue;
+
+ /* Read first DW */
+ dw[count++] = cra_readl(pcie, S10_RP_RXCPL_REG);
+
+ /* Poll for EOP */
+ for (i = 0; i < TLP_LOOP; i++) {
+ ctrl = cra_readl(pcie, S10_RP_RXCPL_STATUS);
+ dw[count++] = cra_readl(pcie, S10_RP_RXCPL_REG);
+ if (ctrl & RP_RXCPL_EOP) {
+ comp_status = TLP_COMP_STATUS(dw[1]);
+ if (comp_status)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (value &&
+ TLP_BYTE_COUNT(dw[1]) == sizeof(u32) &&
+ count >= 3)
+ *value = dw[3];
+
+ return PCIBIOS_SUCCESSFUL;
+ }
+ }
+
+ udelay(5);
+ }
+
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
static void tlp_write_packet(struct altera_pcie *pcie, u32 *headers,
u32 data, bool align)
{
@@ -210,6 +296,15 @@ static void tlp_write_packet(struct altera_pcie *pcie, u32 *headers,
tlp_write_tx(pcie, &tlp_rp_regdata);
}
+static void s10_tlp_write_packet(struct altera_pcie *pcie, u32 *headers,
+ u32 data, bool dummy)
+{
+ s10_tlp_write_tx(pcie, headers[0], RP_TX_SOP);
+ s10_tlp_write_tx(pcie, headers[1], 0);
+ s10_tlp_write_tx(pcie, headers[2], 0);
+ s10_tlp_write_tx(pcie, data, RP_TX_EOP);
+}
+
static int tlp_cfg_dword_read(struct altera_pcie *pcie, u8 bus, u32 devfn,
int where, u8 byte_en, u32 *value)
{
@@ -219,9 +314,9 @@ static int tlp_cfg_dword_read(struct altera_pcie *pcie, u8 bus, u32 devfn,
headers[1] = TLP_CFG_DW1(pcie, TLP_READ_TAG, byte_en);
headers[2] = TLP_CFG_DW2(bus, devfn, where);
- tlp_write_packet(pcie, headers, 0, false);
+ pcie->pcie_data->tlp_write_pkt(pcie, headers, 0, false);
- return tlp_read_packet(pcie, value);
+ return pcie->pcie_data->tlp_read_pkt(pcie, value);
}
static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus, u32 devfn,
@@ -236,11 +331,11 @@ static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus, u32 devfn,
/* check alignment to Qword */
if ((where & 0x7) == 0)
- tlp_write_packet(pcie, headers, value, true);
+ pcie->pcie_data->tlp_write_pkt(pcie, headers, value, true);
else
- tlp_write_packet(pcie, headers, value, false);
+ pcie->pcie_data->tlp_write_pkt(pcie, headers, value, false);
- ret = tlp_read_packet(pcie, NULL);
+ ret = pcie->pcie_data->tlp_read_pkt(pcie, NULL);
if (ret != PCIBIOS_SUCCESSFUL)
return ret;
@@ -254,6 +349,53 @@ static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus, u32 devfn,
return PCIBIOS_SUCCESSFUL;
}
+static int s10_rp_read_cfg(struct altera_pcie *pcie, int where,
+ int size, u32 *value)
+{
+ void *addr = S10_RP_CFG_ADDR(pcie, where);
+
+ switch (size) {
+ case 1:
+ *value = readb(addr);
+ break;
+ case 2:
+ *value = readw(addr);
+ break;
+ default:
+ *value = readl(addr);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int s10_rp_write_cfg(struct altera_pcie *pcie, u8 bus, int where,
+ int size, u32 value)
+{
+ void *addr = S10_RP_CFG_ADDR(pcie, where);
+
+ switch (size) {
+ case 1:
+ writeb(value, addr);
+ break;
+ case 2:
+ writew(value, addr);
+ break;
+ default:
+ writel(value, addr);
+ break;
+ }
+
+ /*
+ * Monitor changes to PCI_PRIMARY_BUS register on root port
+ * and update local copy of root bus number accordingly.
+ */
+ if (bus == pcie->root_bus_nr && where == PCI_PRIMARY_BUS)
+ pcie->root_bus_nr = (u8)(value);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
static int _altera_pcie_cfg_read(struct altera_pcie *pcie, u8 busno,
unsigned int devfn, int where, int size,
u32 *value)
@@ -262,6 +404,9 @@ static int _altera_pcie_cfg_read(struct altera_pcie *pcie, u8 busno,
u32 data;
u8 byte_en;
+ if (busno == pcie->root_bus_nr && pcie->pcie_data->rp_read_cfg)
+ return pcie->pcie_data->rp_read_cfg(pcie, where, size, value);
+
switch (size) {
case 1:
byte_en = 1 << (where & 3);
@@ -302,6 +447,10 @@ static int _altera_pcie_cfg_write(struct altera_pcie *pcie, u8 busno,
u32 shift = 8 * (where & 3);
u8 byte_en;
+ if (busno == pcie->root_bus_nr && pcie->pcie_data->rp_write_cfg)
+ return pcie->pcie_data->rp_write_cfg(pcie, busno, where,
+ size, value);
+
switch (size) {
case 1:
data32 = (value & 0xff) << shift;
@@ -365,7 +514,8 @@ static int altera_read_cap_word(struct altera_pcie *pcie, u8 busno,
int ret;
ret = _altera_pcie_cfg_read(pcie, busno, devfn,
- PCIE_CAP_OFFSET + offset, sizeof(*value),
+ pcie->pcie_data->cap_offset + offset,
+ sizeof(*value),
&data);
*value = data;
return ret;
@@ -375,7 +525,8 @@ static int altera_write_cap_word(struct altera_pcie *pcie, u8 busno,
unsigned int devfn, int offset, u16 value)
{
return _altera_pcie_cfg_write(pcie, busno, devfn,
- PCIE_CAP_OFFSET + offset, sizeof(value),
+ pcie->pcie_data->cap_offset + offset,
+ sizeof(value),
value);
}
@@ -403,7 +554,7 @@ static void altera_wait_link_retrain(struct altera_pcie *pcie)
/* Wait for link is up */
start_jiffies = jiffies;
for (;;) {
- if (altera_pcie_link_up(pcie))
+ if (pcie->pcie_data->get_link_status(pcie))
break;
if (time_after(jiffies, start_jiffies + LINK_UP_TIMEOUT)) {
@@ -418,7 +569,7 @@ static void altera_pcie_retrain(struct altera_pcie *pcie)
{
u16 linkcap, linkstat, linkctl;
- if (!altera_pcie_link_up(pcie))
+ if (!pcie->pcie_data->get_link_status(pcie))
return;
/*
@@ -540,12 +691,20 @@ static int altera_pcie_parse_dt(struct altera_pcie *pcie)
struct device *dev = &pcie->pdev->dev;
struct platform_device *pdev = pcie->pdev;
struct resource *cra;
+ struct resource *hip;
cra = platform_get_resource_byname(pdev, IORESOURCE_MEM, "Cra");
pcie->cra_base = devm_ioremap_resource(dev, cra);
if (IS_ERR(pcie->cra_base))
return PTR_ERR(pcie->cra_base);
+ if (pcie->pcie_data->s10_flag) {
+ hip = platform_get_resource_byname(pdev, IORESOURCE_MEM, "Hip");
+ pcie->hip_base = devm_ioremap_resource(&pdev->dev, hip);
+ if (IS_ERR(pcie->hip_base))
+ return PTR_ERR(pcie->hip_base);
+ }
+
/* setup IRQ */
pcie->irq = platform_get_irq(pdev, 0);
if (pcie->irq < 0) {
@@ -562,6 +721,37 @@ static void altera_pcie_host_init(struct altera_pcie *pcie)
altera_pcie_retrain(pcie);
}
+static struct altera_pcie_data pci_1_0_data = {
+ .tlp_read_pkt = tlp_read_packet,
+ .tlp_write_pkt = tlp_write_packet,
+ .get_link_status = altera_pcie_link_up,
+ .cap_offset = 0x80,
+ .cfgrd0 = TLP_FMTTYPE_CFGRD0,
+ .cfgrd1 = TLP_FMTTYPE_CFGRD1,
+ .cfgwr0 = TLP_FMTTYPE_CFGWR0,
+ .cfgwr1 = TLP_FMTTYPE_CFGWR1,
+};
+
+static struct altera_pcie_data pci_2_0_data = {
+ .tlp_read_pkt = s10_tlp_read_packet,
+ .tlp_write_pkt = s10_tlp_write_packet,
+ .get_link_status = s10_altera_pcie_link_up,
+ .rp_read_cfg = s10_rp_read_cfg,
+ .rp_write_cfg = s10_rp_write_cfg,
+ .s10_flag = true,
+ .cap_offset = 0x70,
+ .cfgrd0 = S10_TLP_FMTTYPE_CFGRD0,
+ .cfgrd1 = S10_TLP_FMTTYPE_CFGRD1,
+ .cfgwr0 = S10_TLP_FMTTYPE_CFGWR0,
+ .cfgwr1 = S10_TLP_FMTTYPE_CFGWR1,
+};
+
+static const struct of_device_id altera_pcie_of_match[] = {
+ { .compatible = "altr,pcie-root-port-1.0", .data = &pci_1_0_data },
+ { .compatible = "altr,pcie-root-port-2.0", .data = &pci_2_0_data },
+ {},
+};
+
static int altera_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -570,6 +760,7 @@ static int altera_pcie_probe(struct platform_device *pdev)
struct pci_bus *child;
struct pci_host_bridge *bridge;
int ret;
+ const struct of_device_id *match;
bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie));
if (!bridge)
@@ -578,6 +769,12 @@ static int altera_pcie_probe(struct platform_device *pdev)
pcie = pci_host_bridge_priv(bridge);
pcie->pdev = pdev;
+ match = of_match_device(altera_pcie_of_match, &pdev->dev);
+ if (!match)
+ return -ENODEV;
+
+ pcie->pcie_data = match->data;
+
ret = altera_pcie_parse_dt(pcie);
if (ret) {
dev_err(dev, "Parsing DT failed\n");
@@ -628,11 +825,6 @@ static int altera_pcie_probe(struct platform_device *pdev)
return ret;
}
-static const struct of_device_id altera_pcie_of_match[] = {
- { .compatible = "altr,pcie-root-port-1.0", },
- {},
-};
-
static struct platform_driver altera_pcie_driver = {
.probe = altera_pcie_probe,
.driver = {
--
1.7.1
Add support for altr,pcie-root-port-2.0.
Signed-off-by: Ley Foon Tan <[email protected]>
---
.../devicetree/bindings/pci/altera-pcie.txt | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt
index 6c396f1..816b244 100644
--- a/Documentation/devicetree/bindings/pci/altera-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt
@@ -1,11 +1,13 @@
* Altera PCIe controller
Required properties:
-- compatible : should contain "altr,pcie-root-port-1.0"
+- compatible : should contain "altr,pcie-root-port-1.0" or "altr,pcie-root-port-2.0"
- reg: a list of physical base address and length for TXS and CRA.
+ For "altr,pcie-root-port-2.0", additional HIP base address and length.
- reg-names: must include the following entries:
"Txs": TX slave port region
"Cra": Control register access region
+ "Hip": Hard IP region (if "altr,pcie-root-port-2.0")
- interrupts: specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends
on the parent interrupt controller.
--
1.7.1
Run "git log --oneline --follow drivers/pci/controller/pcie-altera.c" and
make your subject line match in style, phrasing, and capitalization.
Hint:
............ pci: altera: Add Stratix10 PCIe support
ef75369a5b9a PCI: altera: Fix platform_get_irq() error handling
bfdbbf0e3c2a PCI: altera: Use size=4 IRQ domain for legacy INTx
6ab380957838 PCI: altera: Drop pci_fixup_irqs()
9815791319a0 PCI: altera: Convert PCI scan API to pci_scan_root_bus_bridge()
2a7275a3d867 PCI: altera: Fix TLP_CFG_DW0 for TLP write
One of these is not like the others.
On Mon, Dec 31, 2018 at 04:24:52PM +0800, Ley Foon Tan wrote:
...
> +struct altera_pcie_data {
> + int (*tlp_read_pkt)(struct altera_pcie *pcie, u32 *value);
> + void (*tlp_write_pkt)(struct altera_pcie *pcie, u32 *headers,
> + u32 data, bool align);
> + bool (*get_link_status)(struct altera_pcie *pcie);
> + int (*rp_read_cfg)(struct altera_pcie *pcie, int where,
> + int size, u32 *value);
> + int (*rp_write_cfg)(struct altera_pcie *pcie, u8 bus, int where,
> + int size, u32 value);
> + bool s10_flag; /* Stratix 10 */
This is OK if you only ever have two programming models (the original
and Stratix 10). But if there's a possibility of more, an int model
type that can be tested with a switch is more extensible.
Personally I prefer bitfields over bool in structures, but ultimately
Lorenzo will take this and I don't know whether he has a preference.
https://lkml.kernel.org/r/CA+55aFxnePDimkVKVtv3gNmRGcwc8KQ5mHYvUxY8sAQg6yvVYg@mail.gmail.com
https://lkml.kernel.org/r/CA+55aFzKQ6Pj18TB8p4Yr0M4t+S+BsiHH=BJNmn=76-NcjTj-g@mail.gmail.com
Bjorn
On Mon, Dec 31, 2018 at 04:24:51PM +0800, Ley Foon Tan wrote:
> Add PCIe Root Port support for Stratix10 device and also update
"Stratix10" is a big step better than "StratixXX" because a web search
for the latter finds nothing, while the former does find useful
things.
Intel materials on the web seem to use "Stratix 10". You might as
well include the space in English text.
On Mon, 2018-12-31 at 10:15 -0600, Bjorn Helgaas wrote:
> On Mon, Dec 31, 2018 at 04:24:51PM +0800, Ley Foon Tan wrote:
> >
> > Add PCIe Root Port support for Stratix10 device and also update
> "Stratix10" is a big step better than "StratixXX" because a web
> search
> for the latter finds nothing, while the former does find useful
> things.
>
> Intel materials on the web seem to use "Stratix 10". You might as
> well include the space in English text.
Okay, will change to Stratix 10.
Regards
Ley Foon
On Mon, 2018-12-31 at 09:17 -0600, Bjorn Helgaas wrote:
> Run "git log --oneline --follow drivers/pci/controller/pcie-altera.c"
> and
> make your subject line match in style, phrasing, and capitalization.
>
> Hint:
>
> ............ pci: altera: Add Stratix10 PCIe support
> ef75369a5b9a PCI: altera: Fix platform_get_irq() error handling
> bfdbbf0e3c2a PCI: altera: Use size=4 IRQ domain for legacy INTx
> 6ab380957838 PCI: altera: Drop pci_fixup_irqs()
> 9815791319a0 PCI: altera: Convert PCI scan API to
> pci_scan_root_bus_bridge()
> 2a7275a3d867 PCI: altera: Fix TLP_CFG_DW0 for TLP write
>
> One of these is not like the others.
Okay, will change it.
>
> On Mon, Dec 31, 2018 at 04:24:52PM +0800, Ley Foon Tan wrote:
> ...
> >
> > +struct altera_pcie_data {
> > + int (*tlp_read_pkt)(struct altera_pcie *pcie, u32 *value);
> > + void (*tlp_write_pkt)(struct altera_pcie *pcie, u32
> > *headers,
> > + u32 data, bool align);
> > + bool (*get_link_status)(struct altera_pcie *pcie);
> > + int (*rp_read_cfg)(struct altera_pcie *pcie, int where,
> > + int size, u32 *value);
> > + int (*rp_write_cfg)(struct altera_pcie *pcie, u8 bus, int
> > where,
> > + int size, u32 value);
> > + bool s10_flag; /* Stratix 10 */
> This is OK if you only ever have two programming models (the original
> and Stratix 10). But if there's a possibility of more, an int model
> type that can be tested with a switch is more extensible.
>
> Personally I prefer bitfields over bool in structures, but ultimately
> Lorenzo will take this and I don't know whether he has a preference.
>
> https://lkml.kernel.org/r/CA+55aFxnePDimkVKVtv3gNmRGcwc8KQ5mHYvUxY8sA
> [email protected]
> https://lkml.kernel.org/r/CA+55aFzKQ6Pj18TB8p4Yr0M4t+S+BsiHH=BJNmn=76
> [email protected]
Yes, you are right. Will change it to something like "version type".
Regards
Ley Foon
On Mon, 2018-12-31 at 09:17 -0600, Bjorn Helgaas wrote:
> Run "git log --oneline --follow drivers/pci/controller/pcie-altera.c"
> and
> make your subject line match in style, phrasing, and capitalization.
>
> Hint:
>
> ............ pci: altera: Add Stratix10 PCIe support
> ef75369a5b9a PCI: altera: Fix platform_get_irq() error handling
> bfdbbf0e3c2a PCI: altera: Use size=4 IRQ domain for legacy INTx
> 6ab380957838 PCI: altera: Drop pci_fixup_irqs()
> 9815791319a0 PCI: altera: Convert PCI scan API to
> pci_scan_root_bus_bridge()
> 2a7275a3d867 PCI: altera: Fix TLP_CFG_DW0 for TLP write
>
> One of these is not like the others.
Okay, will change it.
>
> On Mon, Dec 31, 2018 at 04:24:52PM +0800, Ley Foon Tan wrote:
> ...
> >
> > +struct altera_pcie_data {
> > + int (*tlp_read_pkt)(struct altera_pcie *pcie, u32 *value);
> > + void (*tlp_write_pkt)(struct altera_pcie *pcie, u32
> > *headers,
> > + u32 data, bool align);
> > + bool (*get_link_status)(struct altera_pcie *pcie);
> > + int (*rp_read_cfg)(struct altera_pcie *pcie, int where,
> > + int size, u32 *value);
> > + int (*rp_write_cfg)(struct altera_pcie *pcie, u8 bus, int
> > where,
> > + int size, u32 value);
> > + bool s10_flag; /* Stratix 10 */
> This is OK if you only ever have two programming models (the original
> and Stratix 10). But if there's a possibility of more, an int model
> type that can be tested with a switch is more extensible.
>
> Personally I prefer bitfields over bool in structures, but ultimately
> Lorenzo will take this and I don't know whether he has a preference.
>
> https://lkml.kernel.org/r/CA+55aFxnePDimkVKVtv3gNmRGcwc8KQ5mHYvUxY8sA
> [email protected]
> https://lkml.kernel.org/r/CA+55aFzKQ6Pj18TB8p4Yr0M4t+S+BsiHH=BJNmn=76
> [email protected]
Yes, you are right. Will change it to something like "version type".
Regards
Ley Foon