2019-01-02 16:30:20

by Firoz Khan

[permalink] [raw]
Subject: [PATCH 0/2] powerpc: Unify the system call scripts

System call table generation support is provided for
alpha, ia64, m68k, microblaze, mips, parisc, powerpc,
sh, sparc and xtensa architectures. The implementat-
ions are almost similar across all the above archte-
ctures. In order to reduce the source code across all
the above architectures, create common ".sh" files and
keep it in the common directory, script/. This will
be a generic scripts which can use for all the above
architectures.

This patch depends on;
https://lore.kernel.org/lkml/[email protected]/

Firoz Khan (2):
powerpc: remove nargs from __SYSCALL
powerpc: generate uapi header and system call table files

arch/powerpc/kernel/syscalls/Makefile | 11 +++++++--
arch/powerpc/kernel/syscalls/syscallhdr.sh | 37 -----------------------------
arch/powerpc/kernel/syscalls/syscalltbl.sh | 36 ----------------------------
arch/powerpc/kernel/systbl.S | 6 ++---
arch/powerpc/platforms/cell/spu_callbacks.c | 2 +-
5 files changed, 13 insertions(+), 79 deletions(-)
delete mode 100644 arch/powerpc/kernel/syscalls/syscallhdr.sh
delete mode 100644 arch/powerpc/kernel/syscalls/syscalltbl.sh

--
1.9.1



2019-01-02 16:30:20

by Firoz Khan

[permalink] [raw]
Subject: [PATCH 1/2] powerpc: remove nargs from __SYSCALL

The __SYSCALL macro's arguments are system call number,
system call entry name and number of arguments for the
system call.

Argument- nargs in __SYSCALL(nr, entry, nargs) is neither
calculated nor used anywhere. So it would be better to
keep the implementaion as __SYSCALL(nr, entry). This will
unifies the implementation with some other architetures
too.

Signed-off-by: Firoz Khan <[email protected]>
---
arch/powerpc/kernel/syscalls/syscalltbl.sh | 4 ++--
arch/powerpc/kernel/systbl.S | 6 +++---
arch/powerpc/platforms/cell/spu_callbacks.c | 2 +-
3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/kernel/syscalls/syscalltbl.sh b/arch/powerpc/kernel/syscalls/syscalltbl.sh
index fd62049..f7393a7 100644
--- a/arch/powerpc/kernel/syscalls/syscalltbl.sh
+++ b/arch/powerpc/kernel/syscalls/syscalltbl.sh
@@ -13,10 +13,10 @@ emit() {
t_entry="$3"

while [ $t_nxt -lt $t_nr ]; do
- printf "__SYSCALL(%s,sys_ni_syscall, )\n" "${t_nxt}"
+ printf "__SYSCALL(%s,sys_ni_syscall)\n" "${t_nxt}"
t_nxt=$((t_nxt+1))
done
- printf "__SYSCALL(%s,%s, )\n" "${t_nxt}" "${t_entry}"
+ printf "__SYSCALL(%s,%s)\n" "${t_nxt}" "${t_entry}"
}

grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index 23265a2..02f28fa 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -25,11 +25,11 @@
.globl sys_call_table
sys_call_table:
#ifdef CONFIG_PPC64
-#define __SYSCALL(nr, entry, nargs) .8byte DOTSYM(entry)
+#define __SYSCALL(nr, entry) .8byte DOTSYM(entry)
#include <asm/syscall_table_64.h>
#undef __SYSCALL
#else
-#define __SYSCALL(nr, entry, nargs) .long entry
+#define __SYSCALL(nr, entry) .long entry
#include <asm/syscall_table_32.h>
#undef __SYSCALL
#endif
@@ -38,7 +38,7 @@ sys_call_table:
.globl compat_sys_call_table
compat_sys_call_table:
#define compat_sys_sigsuspend sys_sigsuspend
-#define __SYSCALL(nr, entry, nargs) .8byte DOTSYM(entry)
+#define __SYSCALL(nr, entry) .8byte DOTSYM(entry)
#include <asm/syscall_table_c32.h>
#undef __SYSCALL
#endif
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index 125f2a5..b5f35cb 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -34,7 +34,7 @@
*/

static void *spu_syscall_table[] = {
-#define __SYSCALL(nr, entry, nargs) entry,
+#define __SYSCALL(nr, entry) entry,
#include <asm/syscall_table_spu.h>
#undef __SYSCALL
};
--
1.9.1


2019-01-02 16:30:20

by Firoz Khan

[permalink] [raw]
Subject: [PATCH 2/2] powerpc: generate uapi header and system call table files

Unified system call table generation script must be run to
generate unistd_32/64.h and syscall_table_32/64/c32/spu.h
files. This patch will have changes which will invokes the
script.

This patch will generate unistd_32/64.h and syscall_table-
_32/64/c32/spu.h files by the syscall table generation
script invoked by parisc/Makefile and the generated files
against the removed files must be identical.

The generated uapi header file will be included in uapi/-
asm/unistd.h and generated system call table header file
will be included by kernel/systbl.S file.

Signed-off-by: Firoz Khan <[email protected]>
---
arch/powerpc/kernel/syscalls/Makefile | 11 +++++++--
arch/powerpc/kernel/syscalls/syscallhdr.sh | 37 ------------------------------
arch/powerpc/kernel/syscalls/syscalltbl.sh | 36 -----------------------------
3 files changed, 9 insertions(+), 75 deletions(-)
delete mode 100644 arch/powerpc/kernel/syscalls/syscallhdr.sh
delete mode 100644 arch/powerpc/kernel/syscalls/syscalltbl.sh

diff --git a/arch/powerpc/kernel/syscalls/Makefile b/arch/powerpc/kernel/syscalls/Makefile
index 27b4895..5cbbd70 100644
--- a/arch/powerpc/kernel/syscalls/Makefile
+++ b/arch/powerpc/kernel/syscalls/Makefile
@@ -6,8 +6,9 @@ _dummy := $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)') \
$(shell [ -d '$(kapi)' ] || mkdir -p '$(kapi)')

syscall := $(srctree)/$(src)/syscall.tbl
-syshdr := $(srctree)/$(src)/syscallhdr.sh
-systbl := $(srctree)/$(src)/syscalltbl.sh
+syshdr := $(srctree)/scripts/syscallhdr.sh
+sysnr := $(srctree)/scripts/syscallnr.sh
+systbl := $(srctree)/scripts/syscalltbl.sh

quiet_cmd_syshdr = SYSHDR $@
cmd_syshdr = $(CONFIG_SHELL) '$(syshdr)' '$<' '$@' \
@@ -15,6 +16,12 @@ quiet_cmd_syshdr = SYSHDR $@
'$(syshdr_pfx_$(basetarget))' \
'$(syshdr_offset_$(basetarget))'

+quiet_cmd_sysnr = SYSNR $@
+ cmd_sysnr = $(CONFIG_SHELL) '$(sysnr)' '$<' '$@' \
+ '$(sysnr_abis_$(basetarget))' \
+ '$(sysnr_pfx_$(basetarget))' \
+ '$(sysnr_offset_$(basetarget))'
+
quiet_cmd_systbl = SYSTBL $@
cmd_systbl = $(CONFIG_SHELL) '$(systbl)' '$<' '$@' \
'$(systbl_abis_$(basetarget))' \
diff --git a/arch/powerpc/kernel/syscalls/syscallhdr.sh b/arch/powerpc/kernel/syscalls/syscallhdr.sh
deleted file mode 100644
index c0a9a32..0000000
--- a/arch/powerpc/kernel/syscalls/syscallhdr.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-prefix="$4"
-offset="$5"
-
-fileguard=_UAPI_ASM_POWERPC_`basename "$out" | sed \
- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \
- -e 's/[^A-Z0-9_]/_/g' -e 's/__/_/g'`
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
- printf "#ifndef %s\n" "${fileguard}"
- printf "#define %s\n" "${fileguard}"
- printf "\n"
-
- nxt=0
- while read nr abi name entry compat ; do
- if [ -z "$offset" ]; then
- printf "#define __NR_%s%s\t%s\n" \
- "${prefix}" "${name}" "${nr}"
- else
- printf "#define __NR_%s%s\t(%s + %s)\n" \
- "${prefix}" "${name}" "${offset}" "${nr}"
- fi
- nxt=$((nr+1))
- done
-
- printf "\n"
- printf "#ifdef __KERNEL__\n"
- printf "#define __NR_syscalls\t%s\n" "${nxt}"
- printf "#endif\n"
- printf "\n"
- printf "#endif /* %s */" "${fileguard}"
- printf "\n"
-) > "$out"
diff --git a/arch/powerpc/kernel/syscalls/syscalltbl.sh b/arch/powerpc/kernel/syscalls/syscalltbl.sh
deleted file mode 100644
index f7393a7..0000000
--- a/arch/powerpc/kernel/syscalls/syscalltbl.sh
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-my_abi="$4"
-offset="$5"
-
-emit() {
- t_nxt="$1"
- t_nr="$2"
- t_entry="$3"
-
- while [ $t_nxt -lt $t_nr ]; do
- printf "__SYSCALL(%s,sys_ni_syscall)\n" "${t_nxt}"
- t_nxt=$((t_nxt+1))
- done
- printf "__SYSCALL(%s,%s)\n" "${t_nxt}" "${t_entry}"
-}
-
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
- nxt=0
- if [ -z "$offset" ]; then
- offset=0
- fi
-
- while read nr abi name entry compat ; do
- if [ "$my_abi" = "c32" ] && [ ! -z "$compat" ]; then
- emit $((nxt+offset)) $((nr+offset)) $compat
- else
- emit $((nxt+offset)) $((nr+offset)) $entry
- fi
- nxt=$((nr+1))
- done
-) > "$out"
--
1.9.1


2019-03-04 00:49:12

by Michael Ellerman

[permalink] [raw]
Subject: Re: [1/2] powerpc: remove nargs from __SYSCALL

On Wed, 2019-01-02 at 15:02:03 UTC, Firoz Khan wrote:
> The __SYSCALL macro's arguments are system call number,
> system call entry name and number of arguments for the
> system call.
>
> Argument- nargs in __SYSCALL(nr, entry, nargs) is neither
> calculated nor used anywhere. So it would be better to
> keep the implementaion as __SYSCALL(nr, entry). This will
> unifies the implementation with some other architetures
> too.
>
> Signed-off-by: Firoz Khan <[email protected]>

Applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/6b1200facc051a3e487a52cbabd745f7

cheers