The light sensor's power supply could be controllable by regulator
on some platforms, such as i.MX6Q-SABRESD board, the light sensor
isl29023's power supply is controlled by a GPIO fixed regulator,
need to make sure the regulator is enabled before any operation of
sensor, this patch adds vcc regulator operation support.
Signed-off-by: Anson Huang <[email protected]>
---
ChangeLog since V8:
- use devm_add_action_or_reset instead of devm_add_action to avoid calling regulator disable when failed;
---
drivers/iio/light/isl29018.c | 46 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 45 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/light/isl29018.c b/drivers/iio/light/isl29018.c
index b45400f..846df4d 100644
--- a/drivers/iio/light/isl29018.c
+++ b/drivers/iio/light/isl29018.c
@@ -23,6 +23,7 @@
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
@@ -95,6 +96,7 @@ struct isl29018_chip {
struct isl29018_scale scale;
int prox_scheme;
bool suspended;
+ struct regulator *vcc_reg;
};
static int isl29018_set_integration_time(struct isl29018_chip *chip,
@@ -708,6 +710,16 @@ static const char *isl29018_match_acpi_device(struct device *dev, int *data)
return dev_name(dev);
}
+static void isl29018_disable_regulator_action(void *_data)
+{
+ struct isl29018_chip *chip = _data;
+ int err;
+
+ err = regulator_disable(chip->vcc_reg);
+ if (err)
+ pr_err("failed to disable isl29018's VCC regulator!\n");
+}
+
static int isl29018_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -742,6 +754,27 @@ static int isl29018_probe(struct i2c_client *client,
chip->scale = isl29018_scales[chip->int_time][0];
chip->suspended = false;
+ chip->vcc_reg = devm_regulator_get(&client->dev, "vcc");
+ if (IS_ERR(chip->vcc_reg)) {
+ err = PTR_ERR(chip->vcc_reg);
+ if (err != -EPROBE_DEFER)
+ dev_err(&client->dev, "failed to get VCC regulator!\n");
+ return err;
+ }
+
+ err = regulator_enable(chip->vcc_reg);
+ if (err) {
+ dev_err(&client->dev, "failed to enable VCC regulator!\n");
+ return err;
+ }
+
+ err = devm_add_action_or_reset(&client->dev, isl29018_disable_regulator_action,
+ chip);
+ if (err) {
+ dev_err(&client->dev, "failed to setup regulator cleanup action!\n");
+ return err;
+ }
+
chip->regmap = devm_regmap_init_i2c(client,
isl29018_chip_info_tbl[dev_id].regmap_cfg);
if (IS_ERR(chip->regmap)) {
@@ -768,6 +801,7 @@ static int isl29018_probe(struct i2c_client *client,
static int isl29018_suspend(struct device *dev)
{
struct isl29018_chip *chip = iio_priv(dev_get_drvdata(dev));
+ int ret;
mutex_lock(&chip->lock);
@@ -777,10 +811,13 @@ static int isl29018_suspend(struct device *dev)
* So we do not have much to do here.
*/
chip->suspended = true;
+ ret = regulator_disable(chip->vcc_reg);
+ if (ret)
+ dev_err(dev, "failed to disable VCC regulator\n");
mutex_unlock(&chip->lock);
- return 0;
+ return ret;
}
static int isl29018_resume(struct device *dev)
@@ -790,6 +827,13 @@ static int isl29018_resume(struct device *dev)
mutex_lock(&chip->lock);
+ err = regulator_enable(chip->vcc_reg);
+ if (err) {
+ dev_err(dev, "failed to enable VCC regulator\n");
+ mutex_unlock(&chip->lock);
+ return err;
+ }
+
err = isl29018_chip_init(chip);
if (!err)
chip->suspended = false;
--
2.7.4
On Tue, 8 Jan 2019 09:09:39 +0000
Anson Huang <[email protected]> wrote:
> The light sensor's power supply could be controllable by regulator
> on some platforms, such as i.MX6Q-SABRESD board, the light sensor
> isl29023's power supply is controlled by a GPIO fixed regulator,
> need to make sure the regulator is enabled before any operation of
> sensor, this patch adds vcc regulator operation support.
>
> Signed-off-by: Anson Huang <[email protected]>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> ChangeLog since V8:
> - use devm_add_action_or_reset instead of devm_add_action to avoid calling regulator disable when failed;
> ---
> drivers/iio/light/isl29018.c | 46 +++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 45 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/light/isl29018.c b/drivers/iio/light/isl29018.c
> index b45400f..846df4d 100644
> --- a/drivers/iio/light/isl29018.c
> +++ b/drivers/iio/light/isl29018.c
> @@ -23,6 +23,7 @@
> #include <linux/mutex.h>
> #include <linux/delay.h>
> #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> #include <linux/slab.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
> @@ -95,6 +96,7 @@ struct isl29018_chip {
> struct isl29018_scale scale;
> int prox_scheme;
> bool suspended;
> + struct regulator *vcc_reg;
> };
>
> static int isl29018_set_integration_time(struct isl29018_chip *chip,
> @@ -708,6 +710,16 @@ static const char *isl29018_match_acpi_device(struct device *dev, int *data)
> return dev_name(dev);
> }
>
> +static void isl29018_disable_regulator_action(void *_data)
> +{
> + struct isl29018_chip *chip = _data;
> + int err;
> +
> + err = regulator_disable(chip->vcc_reg);
> + if (err)
> + pr_err("failed to disable isl29018's VCC regulator!\n");
> +}
> +
> static int isl29018_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -742,6 +754,27 @@ static int isl29018_probe(struct i2c_client *client,
> chip->scale = isl29018_scales[chip->int_time][0];
> chip->suspended = false;
>
> + chip->vcc_reg = devm_regulator_get(&client->dev, "vcc");
> + if (IS_ERR(chip->vcc_reg)) {
> + err = PTR_ERR(chip->vcc_reg);
> + if (err != -EPROBE_DEFER)
> + dev_err(&client->dev, "failed to get VCC regulator!\n");
> + return err;
> + }
> +
> + err = regulator_enable(chip->vcc_reg);
> + if (err) {
> + dev_err(&client->dev, "failed to enable VCC regulator!\n");
> + return err;
> + }
> +
> + err = devm_add_action_or_reset(&client->dev, isl29018_disable_regulator_action,
> + chip);
> + if (err) {
> + dev_err(&client->dev, "failed to setup regulator cleanup action!\n");
> + return err;
> + }
> +
> chip->regmap = devm_regmap_init_i2c(client,
> isl29018_chip_info_tbl[dev_id].regmap_cfg);
> if (IS_ERR(chip->regmap)) {
> @@ -768,6 +801,7 @@ static int isl29018_probe(struct i2c_client *client,
> static int isl29018_suspend(struct device *dev)
> {
> struct isl29018_chip *chip = iio_priv(dev_get_drvdata(dev));
> + int ret;
>
> mutex_lock(&chip->lock);
>
> @@ -777,10 +811,13 @@ static int isl29018_suspend(struct device *dev)
> * So we do not have much to do here.
> */
> chip->suspended = true;
> + ret = regulator_disable(chip->vcc_reg);
> + if (ret)
> + dev_err(dev, "failed to disable VCC regulator\n");
>
> mutex_unlock(&chip->lock);
>
> - return 0;
> + return ret;
> }
>
> static int isl29018_resume(struct device *dev)
> @@ -790,6 +827,13 @@ static int isl29018_resume(struct device *dev)
>
> mutex_lock(&chip->lock);
>
> + err = regulator_enable(chip->vcc_reg);
> + if (err) {
> + dev_err(dev, "failed to enable VCC regulator\n");
> + mutex_unlock(&chip->lock);
> + return err;
> + }
> +
> err = isl29018_chip_init(chip);
> if (!err)
> chip->suspended = false;