Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]>
---
arch/arm/Kconfig | 24 +++++++++++-----------
arch/arm/mach-aspeed/Kconfig | 10 ++++-----
arch/arm/mach-ep93xx/Kconfig | 8 ++++----
arch/arm/mach-hisi/Kconfig | 14 ++++++-------
arch/arm/mach-ixp4xx/Kconfig | 32 ++++++++++++++---------------
arch/arm/mach-mmp/Kconfig | 2 +-
arch/arm/mach-omap1/Kconfig | 36 ++++++++++++++++----------------
arch/arm/mach-omap2/Kconfig | 12 +++++------
arch/arm/mach-prima2/Kconfig | 6 +++---
arch/arm/mach-s3c24xx/Kconfig | 32 ++++++++++++++---------------
arch/arm/mach-s3c64xx/Kconfig | 16 +++++++--------
arch/arm/mach-sa1100/Kconfig | 4 ++--
arch/arm/mach-vt8500/Kconfig | 6 +++---
arch/arm/mach-w90x900/Kconfig | 6 +++---
arch/arm/mm/Kconfig | 48 +++++++++++++++++++++----------------------
arch/arm/plat-samsung/Kconfig | 26 +++++++++++------------
16 files changed, 140 insertions(+), 142 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5085a1e..c89f683 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1115,14 +1115,14 @@ config ARM_ERRATA_764369
in the diagnostic control register of the SCU.
config ARM_ERRATA_775420
- bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
- depends on CPU_V7
- help
- This option enables the workaround for the 775420 Cortex-A9 (r2p2,
- r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
- operation aborts with MMU exception, it might cause the processor
- to deadlock. This workaround puts DSB before executing ISB if
- an abort may occur on cache maintenance.
+ bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 775420 Cortex-A9 (r2p2,
+ r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
+ operation aborts with MMU exception, it might cause the processor
+ to deadlock. This workaround puts DSB before executing ISB if
+ an abort may occur on cache maintenance.
config ARM_ERRATA_798181
bool "ARM errata: TLBI/DSB failure on Cortex-A15"
@@ -1650,12 +1650,12 @@ config HW_PERF_EVENTS
depends on ARM_PMU
config SYS_SUPPORTS_HUGETLBFS
- def_bool y
- depends on ARM_LPAE
+ def_bool y
+ depends on ARM_LPAE
config HAVE_ARCH_TRANSPARENT_HUGEPAGE
- def_bool y
- depends on ARM_LPAE
+ def_bool y
+ depends on ARM_LPAE
config ARCH_WANT_GENERAL_HUGETLB
def_bool y
diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
index 2d5570e..f6eaf05 100644
--- a/arch/arm/mach-aspeed/Kconfig
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -18,9 +18,9 @@ config MACH_ASPEED_G4
select CPU_ARM926T
select PINCTRL_ASPEED_G4
help
- Say yes if you intend to run on an Aspeed ast2400 or similar
- fourth generation BMCs, such as those used by OpenPower Power8
- systems.
+ Say yes if you intend to run on an Aspeed ast2400 or similar
+ fourth generation BMCs, such as those used by OpenPower Power8
+ systems.
config MACH_ASPEED_G5
bool "Aspeed SoC 5th Generation"
@@ -28,7 +28,7 @@ config MACH_ASPEED_G5
select CPU_V6
select PINCTRL_ASPEED_G5
help
- Say yes if you intend to run on an Aspeed ast2500 or similar
- fifth generation Aspeed BMCs.
+ Say yes if you intend to run on an Aspeed ast2500 or similar
+ fifth generation Aspeed BMCs.
endif
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index c095236..597ea24 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -125,10 +125,10 @@ config MACH_MICRO9S
Contec Micro9-Slim board.
config MACH_SIM_ONE
- bool "Support Simplemachines Sim.One board"
- help
- Say 'Y' here if you want your kernel to support the
- Simplemachines Sim.One board.
+ bool "Support Simplemachines Sim.One board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Simplemachines Sim.One board.
config MACH_SNAPPER_CL15
bool "Support Bluewater Systems Snapper CL15 Module"
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 65a048f..4850f8b 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -24,13 +24,13 @@ config ARCH_HI3xxx
Support for Hisilicon Hi36xx SoC family
config ARCH_HIP01
- bool "Hisilicon HIP01 family"
- depends on ARCH_MULTI_V7
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select ARM_GLOBAL_TIMER
- help
- Support for Hisilicon HIP01 SoC family
+ bool "Hisilicon HIP01 family"
+ depends on ARCH_MULTI_V7
+ select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD if SMP
+ select ARM_GLOBAL_TIMER
+ help
+ Support for Hisilicon HIP01 SoC family
config ARCH_HIP04
bool "Hisilicon HiP04 Cortex A15 family"
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index fea00812..7b47a3c 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -22,9 +22,9 @@ config MACH_AVILA
see <file:Documentation/arm/IXP4xx>.
config MACH_LOFT
- bool "Loft"
- depends on MACH_AVILA
- help
+ bool "Loft"
+ depends on MACH_AVILA
+ help
Say 'Y' here if you want your kernel to support the Giant
Shoulder Inc Loft board (a minor variation on the standard
Gateworks Avila Network Platform).
@@ -33,7 +33,7 @@ config ARCH_ADI_COYOTE
bool "Coyote"
select FORCE_PCI
help
- Say 'Y' here if you want your kernel to support the ADI
+ Say 'Y' here if you want your kernel to support the ADI
Engineering Coyote Gateway Reference Platform. For more
information on this platform, see <file:Documentation/arm/IXP4xx>.
@@ -56,8 +56,8 @@ config MACH_WG302V2
config ARCH_IXDP425
bool "IXDP425"
help
- Say 'Y' here if you want your kernel to support Intel's
- IXDP425 Development Platform (Also known as Richfield).
+ Say 'Y' here if you want your kernel to support Intel's
+ IXDP425 Development Platform (Also known as Richfield).
For more information on this platform, see <file:Documentation/arm/IXP4xx>.
config MACH_IXDPG425
@@ -88,12 +88,12 @@ config MACH_KIXRP435
For more information on this platform, see <file:Documentation/arm/IXP4xx>.
#
-# IXCDP1100 is the exact same HW as IXDP425, but with a different machine
-# number from the bootloader due to marketing monkeys, so we just enable it
+# IXCDP1100 is the exact same HW as IXDP425, but with a different machine
+# number from the bootloader due to marketing monkeys, so we just enable it
# by default if IXDP425 is enabled.
#
config ARCH_IXCDP1100
- bool
+ bool
depends on ARCH_IXDP425
default y
@@ -200,14 +200,14 @@ config IXP4XX_INDIRECT_PCI
bool "Use indirect PCI memory access"
depends on PCI
help
- IXP4xx provides two methods of accessing PCI memory space:
+ IXP4xx provides two methods of accessing PCI memory space:
- 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
- To access PCI via this space, we simply ioremap() the BAR
- into the kernel and we can use the standard read[bwl]/write[bwl]
- macros. This is the preferred method due to speed but it
- limits the system to just 64MB of PCI memory. This can be
- problematic if using video cards and other memory-heavy devices.
+ 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
+ To access PCI via this space, we simply ioremap() the BAR
+ into the kernel and we can use the standard read[bwl]/write[bwl]
+ macros. This is the preferred method due to speed but it
+ limits the system to just 64MB of PCI memory. This can be
+ problematic if using video cards and other memory-heavy devices.
2) If > 64MB of memory space is required, the IXP4xx can be
configured to use indirect registers to access the whole PCI
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 94500be..144036e 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -149,7 +149,7 @@ config CPU_MMP2
Select code specific to MMP2. MMP2 is ARMv7 compatible.
config USB_EHCI_MV_U2O
- bool "EHCI support for PXA USB OTG controller"
+ bool "EHCI support for PXA USB OTG controller"
depends on USB_EHCI_MV
help
Enables support for OTG controller which can be switched to host mode.
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index c4694f2..2e7d733 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -55,7 +55,7 @@ config OMAP_MUX_WARNINGS
default y
help
Choose Y here to warn whenever driver initialization logic needs
- to change the pin multiplexing setup. When there are no warnings
+ to change the pin multiplexing setup. When there are no warnings
printed, it's safe to deselect OMAP_MUX for your product.
comment "OMAP Board Type"
@@ -65,20 +65,20 @@ config MACH_OMAP_INNOVATOR
bool "TI Innovator"
depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
help
- TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
- have such a board.
+ TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
+ have such a board.
config MACH_OMAP_H2
bool "TI H2 Support"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
- help
+ help
TI OMAP 1610/1611B H2 board support. Say Y here if you have such
a board.
config MACH_OMAP_H3
bool "TI H3 Support"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
- help
+ help
TI OMAP 1710 H3 board support. Say Y here if you have such
a board.
@@ -91,14 +91,14 @@ config MACH_HERALD
config MACH_OMAP_OSK
bool "TI OSK Support"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
- help
+ help
TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
- if you have such a board.
+ if you have such a board.
config OMAP_OSK_MISTRAL
bool "Mistral QVGA board Support"
depends on MACH_OMAP_OSK
- help
+ help
The OSK supports an optional add-on board with a Quarter-VGA
touchscreen, PDA-ish buttons, a resume button, bicolor LED,
and camera connector. Say Y here if you have this board.
@@ -106,14 +106,14 @@ config OMAP_OSK_MISTRAL
config MACH_OMAP_PERSEUS2
bool "TI Perseus2"
depends on ARCH_OMAP1 && ARCH_OMAP730
- help
+ help
Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
a board.
config MACH_OMAP_FSAMPLE
bool "TI F-Sample"
depends on ARCH_OMAP1 && ARCH_OMAP730
- help
+ help
Support for TI OMAP 850 F-Sample board. Say Y here if you have such
a board.
@@ -130,10 +130,10 @@ config MACH_OMAP_PALMZ71
bool "Palm Zire71"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
help
- Support for the Palm Zire71 PDA. To boot the kernel,
- you'll need a PalmOS compatible bootloader; check out
- http://hackndev.com/palm/z71 for more information.
- Say Y here if you have such a PDA, say N otherwise.
+ Support for the Palm Zire71 PDA. To boot the kernel,
+ you'll need a PalmOS compatible bootloader; check out
+ http://hackndev.com/palm/z71 for more information.
+ Say Y here if you have such a PDA, say N otherwise.
config MACH_OMAP_PALMTT
bool "Palm Tungsten|T"
@@ -179,10 +179,10 @@ config MACH_OMAP_GENERIC
bool "Generic OMAP board"
depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
help
- Support for generic OMAP-1510, 1610 or 1710 board with
- no FPGA. Can be used as template for porting Linux to
- custom OMAP boards. Say Y here if you have a custom
- board.
+ Support for generic OMAP-1510, 1610 or 1710 board with
+ no FPGA. Can be used as template for porting Linux to
+ custom OMAP boards. Say Y here if you have a custom
+ board.
endmenu
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5e33d1a..4db9516d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -174,16 +174,16 @@ config SOC_TI81XX
default y
config OMAP_PACKAGE_CBC
- bool
+ bool
config OMAP_PACKAGE_CBB
- bool
+ bool
config OMAP_PACKAGE_CUS
- bool
+ bool
config OMAP_PACKAGE_CBP
- bool
+ bool
comment "OMAP Legacy Platform Data Board Type"
depends on ARCH_OMAP2PLUS
@@ -208,10 +208,10 @@ config MACH_OMAP3_PANDORA
select OMAP_PACKAGE_CBB
config MACH_NOKIA_N810
- bool
+ bool
config MACH_NOKIA_N810_WIMAX
- bool
+ bool
config MACH_NOKIA_N8X0
bool "Nokia N800/N810"
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 7426211..458c02f 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -21,7 +21,7 @@ config ARCH_ATLAS6
default y
select SIRF_IRQ
help
- Support for CSR SiRFSoC ARM Cortex A9 Platform
+ Support for CSR SiRFSoC ARM Cortex A9 Platform
config ARCH_ATLAS7
bool "CSR SiRFSoC ATLAS7 ARM Cortex A7 Platform"
@@ -31,7 +31,7 @@ config ARCH_ATLAS7
select HAVE_ARM_SCU if SMP
select HAVE_SMP
help
- Support for CSR SiRFSoC ARM Cortex A7 Platform
+ Support for CSR SiRFSoC ARM Cortex A7 Platform
config ARCH_PRIMA2
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
@@ -40,7 +40,7 @@ config ARCH_PRIMA2
select ZONE_DMA
select PRIMA2_TIMER
help
- Support for CSR SiRFSoC ARM Cortex A9 Platform
+ Support for CSR SiRFSoC ARM Cortex A9 Platform
config SIRF_IRQ
bool
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 686f0bb..bcc6ce4 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -17,8 +17,6 @@ config PLAT_S3C24XX
help
Base platform code for any Samsung S3C24XX device
-
-
menu "SAMSUNG S3C24XX SoCs Support"
comment "S3C24XX SoCs"
@@ -138,11 +136,11 @@ config S3C2410_IOTIMING
and s3c2440/s3c2442 cpu frequency support.
config S3C2410_CPUFREQ_UTILS
- bool
- depends on ARM_S3C24XX_CPUFREQ
- help
- Internal node to select timing code that is common to the s3c2410
- and s3c2440/s3c244 cpu frequency support.
+ bool
+ depends on ARM_S3C24XX_CPUFREQ
+ help
+ Internal node to select timing code that is common to the s3c2410
+ and s3c2440/s3c244 cpu frequency support.
# cpu frequency support common to s3c2412, s3c2413 and s3c2442
@@ -280,7 +278,7 @@ config MACH_VR1000
help
Say Y here if you are using the Thorcom VR1000 board.
-endif # CPU_S3C2410
+endif # CPU_S3C2410
config S3C2412_PM_SLEEP
bool
@@ -354,7 +352,7 @@ config MACH_VSTMS
help
Say Y here if you are using an VSTMS board
-endif # CPU_S3C2412
+endif # CPU_S3C2412
if CPU_S3C2416
@@ -402,7 +400,7 @@ config MACH_S3C2416_DT
Note: This is under development and not all peripherals can be supported
with this machine file.
-endif # CPU_S3C2416
+endif # CPU_S3C2416
if CPU_S3C2440 || CPU_S3C2442
@@ -528,7 +526,7 @@ config SMDK2440_CPU2440
default y if ARCH_S3C2440
select S3C2440_XTAL_16934400
-endif # CPU_S3C2440
+endif # CPU_S3C2440
if CPU_S3C2442
@@ -548,7 +546,7 @@ config MACH_NEO1973_GTA02
select S3C24XX_PWM
select S3C_DEV_USB_HOST
help
- Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+ Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
config MACH_RX1950
bool "HP iPAQ rx1950"
@@ -560,9 +558,9 @@ config MACH_RX1950
select S3C24XX_PWM
select S3C_DEV_NAND
help
- Say Y here if you're using HP iPAQ rx1950
+ Say Y here if you're using HP iPAQ rx1950
-endif # CPU_S3C2442
+endif # CPU_S3C2442
if CPU_S3C2443 || CPU_S3C2416
@@ -571,7 +569,7 @@ config S3C2443_SETUP_SPI
help
Common setup code for SPI GPIO configurations
-endif # CPU_S3C2443 || CPU_S3C2416
+endif # CPU_S3C2443 || CPU_S3C2416
if CPU_S3C2443
@@ -584,7 +582,7 @@ config MACH_SMDK2443
help
Say Y here if you are using an SMDK2443
-endif # CPU_S3C2443
+endif # CPU_S3C2443
config PM_H1940
bool
@@ -593,4 +591,4 @@ config PM_H1940
endmenu # SAMSUNG S3C24XX SoCs Support
-endif # ARCH_S3C24XX
+endif # ARCH_S3C24XX
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 5700822..f6b05277 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -100,7 +100,7 @@ config S3C64XX_SETUP_SDHCI_GPIO
config S3C64XX_SETUP_SPI
bool
help
- Common setup code for SPI GPIO configurations
+ Common setup code for SPI GPIO configurations
config S3C64XX_SETUP_USB_PHY
bool
@@ -110,7 +110,7 @@ config S3C64XX_SETUP_USB_PHY
# S36400 Macchine support
config MACH_SMDK6400
- bool "SMDK6400"
+ bool "SMDK6400"
depends on ATAGS
select CPU_S3C6400
select S3C64XX_SETUP_SDHCI
@@ -202,7 +202,7 @@ config SMDK6410_SD_CH0
bool "Use channel 0 only"
depends on MACH_SMDK6410
help
- Select CON7 (channel 0) as the MMC/SD slot, as
+ Select CON7 (channel 0) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
@@ -211,7 +211,7 @@ config SMDK6410_SD_CH1
bool "Use channel 1 only"
depends on MACH_SMDK6410
help
- Select CON6 (channel 1) as the MMC/SD slot, as
+ Select CON6 (channel 1) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
@@ -257,7 +257,7 @@ config MACH_NCP
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
help
- Machine support for the Samsung NCP
+ Machine support for the Samsung NCP
config MACH_HMT
bool "Airgoo HMT"
@@ -289,21 +289,21 @@ config MACH_SMARTQ
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
help
- Shared machine support for SmartQ 5/7
+ Shared machine support for SmartQ 5/7
config MACH_SMARTQ5
bool "SmartQ 5"
depends on ATAGS
select MACH_SMARTQ
help
- Machine support for the SmartQ 5
+ Machine support for the SmartQ 5
config MACH_SMARTQ7
bool "SmartQ 7"
depends on ATAGS
select MACH_SMARTQ
help
- Machine support for the SmartQ 7
+ Machine support for the SmartQ 7
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index ce41c67..b1c092c 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -91,8 +91,8 @@ config SA1100_JORNADA720
select SA1111
help
Say Y here if you want to build a kernel for the HP Jornada 720
- handheld computer. See
- <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#>
+ handheld computer. See
+ <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#>
config SA1100_JORNADA720_SSP
bool "HP Jornada 720 Extended SSP driver"
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 8841199..6343961 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -10,9 +10,9 @@ config ARCH_VT8500
config ARCH_WM8505
bool "VIA/Wondermedia 85xx and WM8650"
- depends on ARCH_MULTI_V5
- select ARCH_VT8500
- select CPU_ARM926T
+ depends on ARCH_MULTI_V5
+ select ARCH_VT8500
+ select CPU_ARM926T
config ARCH_WM8750
bool "WonderMedia WM8750"
diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
index b16ffc0..1fb3a3b 100644
--- a/arch/arm/mach-w90x900/Kconfig
+++ b/arch/arm/mach-w90x900/Kconfig
@@ -23,7 +23,7 @@ config MACH_W90P910EVB
default y
select CPU_W90P910
help
- Say Y here if you are using the Nuvoton W90P910EVB
+ Say Y here if you are using the Nuvoton W90P910EVB
endmenu
@@ -33,7 +33,7 @@ config MACH_W90P950EVB
bool "Nuvoton NUC950 Evaluation Board"
select CPU_NUC950
help
- Say Y here if you are using the Nuvoton NUC950EVB
+ Say Y here if you are using the Nuvoton NUC950EVB
endmenu
@@ -43,7 +43,7 @@ config MACH_W90N960EVB
bool "Nuvoton NUC960 Evaluation Board"
select CPU_NUC960
help
- Say Y here if you are using the Nuvoton NUC960EVB
+ Say Y here if you are using the Nuvoton NUC960EVB
endmenu
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index b169e58..23e75a1 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -123,13 +123,13 @@ config CPU_ARM925T
select CPU_PABRT_LEGACY
select CPU_THUMB_CAPABLE
select CPU_TLB_V4WBI if MMU
- help
- The ARM925T is a mix between the ARM920T and ARM926T, but with
+ help
+ The ARM925T is a mix between the ARM920T and ARM926T, but with
different instruction and data caches. It is used in TI's OMAP
- device family.
+ device family.
- Say Y if you want support for the ARM925T processor.
- Otherwise, say N.
+ Say Y if you want support for the ARM925T processor.
+ Otherwise, say N.
# ARM926T
config CPU_ARM926T
@@ -829,19 +829,19 @@ config HARDEN_BRANCH_PREDICTOR
depends on CPU_SPECTRE
default y
help
- Speculation attacks against some high-performance processors rely
- on being able to manipulate the branch predictor for a victim
- context by executing aliasing branches in the attacker context.
- Such attacks can be partially mitigated against by clearing
- internal branch predictor state and limiting the prediction
- logic in some situations.
+ Speculation attacks against some high-performance processors rely
+ on being able to manipulate the branch predictor for a victim
+ context by executing aliasing branches in the attacker context.
+ Such attacks can be partially mitigated against by clearing
+ internal branch predictor state and limiting the prediction
+ logic in some situations.
- This config option will take CPU-specific actions to harden
- the branch predictor against aliasing attacks and may rely on
- specific instruction sequences or control bits being set by
- the system firmware.
+ This config option will take CPU-specific actions to harden
+ the branch predictor against aliasing attacks and may rely on
+ specific instruction sequences or control bits being set by
+ the system firmware.
- If unsure, say Y.
+ If unsure, say Y.
config TLS_REG_EMUL
bool
@@ -983,14 +983,14 @@ if CACHE_L2X0
config PL310_ERRATA_588369
bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
help
- The PL310 L2 cache controller implements three types of Clean &
- Invalidate maintenance operations: by Physical Address
- (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
- They are architecturally defined to behave as the execution of a
- clean operation followed immediately by an invalidate operation,
- both performing to the same memory location. This functionality
- is not correctly implemented in PL310 prior to r2p0 (fixed in r2p0)
- as clean lines are not invalidated as a result of these operations.
+ The PL310 L2 cache controller implements three types of Clean &
+ Invalidate maintenance operations: by Physical Address
+ (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
+ They are architecturally defined to behave as the execution of a
+ clean operation followed immediately by an invalidate operation,
+ both performing to the same memory location. This functionality
+ is not correctly implemented in PL310 prior to r2p0 (fixed in r2p0)
+ as clean lines are not invalidated as a result of these operations.
config PL310_ERRATA_727915
bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 53da57f..1946c3d 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -39,12 +39,12 @@ config SAMSUNG_ATAGS
def_bool n
depends on ATAGS
help
- This option enables ATAGS based boot support code for
- Samsung platforms, including static platform devices, legacy
- clock, timer and interrupt initialization, etc.
+ This option enables ATAGS based boot support code for
+ Samsung platforms, including static platform devices, legacy
+ clock, timer and interrupt initialization, etc.
- Platforms that support only DT based boot need not to select
- this option.
+ Platforms that support only DT based boot need not to select
+ this option.
if SAMSUNG_ATAGS
@@ -98,7 +98,7 @@ config S3C_DEV_HSMMC3
config S3C_DEV_HWMON
bool
help
- Compile in platform device definitions for HWMON
+ Compile in platform device definitions for HWMON
config S3C_DEV_I2C1
bool
@@ -202,7 +202,7 @@ config S3C64XX_DEV_SPI2
config SAMSUNG_DEV_TS
bool
help
- Common in platform device definitions for touchscreen device
+ Common in platform device definitions for touchscreen device
config SAMSUNG_DEV_KEYPAD
bool
@@ -247,13 +247,13 @@ config SAMSUNG_PM_DEBUG
for more information.
config S3C_PM_DEBUG_LED_SMDK
- bool "SMDK LED suspend/resume debugging"
- depends on PM && (MACH_SMDK6410)
- help
- Say Y here to enable the use of the SMDK LEDs on the baseboard
- for debugging of the state of the suspend and resume process.
+ bool "SMDK LED suspend/resume debugging"
+ depends on PM && (MACH_SMDK6410)
+ help
+ Say Y here to enable the use of the SMDK LEDs on the baseboard
+ for debugging of the state of the suspend and resume process.
- Note, this currently only works for S3C64XX based SMDK boards.
+ Note, this currently only works for S3C64XX based SMDK boards.
config SAMSUNG_PM_CHECK
bool "S3C2410 PM Suspend Memory CRC"
--
1.9.1
On Mon, 2019-03-11 at 14:56 +0100, Enrico Weigelt, metux IT consult
wrote:
> Formatting of Kconfig files doesn't look so pretty, so let the
> Great White Handkerchief come around and clean it up.
>
> Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]>
> ---
> arch/arm/Kconfig | 24 +++++++++++-----------
> arch/arm/mach-aspeed/Kconfig | 10 ++++-----
> arch/arm/mach-ep93xx/Kconfig | 8 ++++----
> arch/arm/mach-hisi/Kconfig | 14 ++++++-------
> arch/arm/mach-ixp4xx/Kconfig | 32 ++++++++++++++---------------
> arch/arm/mach-mmp/Kconfig | 2 +-
> arch/arm/mach-omap1/Kconfig | 36 ++++++++++++++++----------------
> arch/arm/mach-omap2/Kconfig | 12 +++++------
> arch/arm/mach-prima2/Kconfig | 6 +++---
> arch/arm/mach-s3c24xx/Kconfig | 32 ++++++++++++++---------------
> arch/arm/mach-s3c64xx/Kconfig | 16 +++++++--------
> arch/arm/mach-sa1100/Kconfig | 4 ++--
> arch/arm/mach-vt8500/Kconfig | 6 +++---
> arch/arm/mach-w90x900/Kconfig | 6 +++---
> arch/arm/mm/Kconfig | 48 +++++++++++++++++++++----------------------
> arch/arm/plat-samsung/Kconfig | 26 +++++++++++------------
> 16 files changed, 140 insertions(+), 142 deletions(-)
Acked-by: Lubomir Rintel <[email protected]> (mach-mmp)
Thanks
Lubo
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 5085a1e..c89f683 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1115,14 +1115,14 @@ config ARM_ERRATA_764369
> in the diagnostic control register of the SCU.
>
> config ARM_ERRATA_775420
> - bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
> - depends on CPU_V7
> - help
> - This option enables the workaround for the 775420 Cortex-A9 (r2p2,
> - r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
> - operation aborts with MMU exception, it might cause the processor
> - to deadlock. This workaround puts DSB before executing ISB if
> - an abort may occur on cache maintenance.
> + bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
> + depends on CPU_V7
> + help
> + This option enables the workaround for the 775420 Cortex-A9 (r2p2,
> + r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
> + operation aborts with MMU exception, it might cause the processor
> + to deadlock. This workaround puts DSB before executing ISB if
> + an abort may occur on cache maintenance.
>
> config ARM_ERRATA_798181
> bool "ARM errata: TLBI/DSB failure on Cortex-A15"
> @@ -1650,12 +1650,12 @@ config HW_PERF_EVENTS
> depends on ARM_PMU
>
> config SYS_SUPPORTS_HUGETLBFS
> - def_bool y
> - depends on ARM_LPAE
> + def_bool y
> + depends on ARM_LPAE
>
> config HAVE_ARCH_TRANSPARENT_HUGEPAGE
> - def_bool y
> - depends on ARM_LPAE
> + def_bool y
> + depends on ARM_LPAE
>
> config ARCH_WANT_GENERAL_HUGETLB
> def_bool y
> diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
> index 2d5570e..f6eaf05 100644
> --- a/arch/arm/mach-aspeed/Kconfig
> +++ b/arch/arm/mach-aspeed/Kconfig
> @@ -18,9 +18,9 @@ config MACH_ASPEED_G4
> select CPU_ARM926T
> select PINCTRL_ASPEED_G4
> help
> - Say yes if you intend to run on an Aspeed ast2400 or similar
> - fourth generation BMCs, such as those used by OpenPower Power8
> - systems.
> + Say yes if you intend to run on an Aspeed ast2400 or similar
> + fourth generation BMCs, such as those used by OpenPower Power8
> + systems.
>
> config MACH_ASPEED_G5
> bool "Aspeed SoC 5th Generation"
> @@ -28,7 +28,7 @@ config MACH_ASPEED_G5
> select CPU_V6
> select PINCTRL_ASPEED_G5
> help
> - Say yes if you intend to run on an Aspeed ast2500 or similar
> - fifth generation Aspeed BMCs.
> + Say yes if you intend to run on an Aspeed ast2500 or similar
> + fifth generation Aspeed BMCs.
>
> endif
> diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
> index c095236..597ea24 100644
> --- a/arch/arm/mach-ep93xx/Kconfig
> +++ b/arch/arm/mach-ep93xx/Kconfig
> @@ -125,10 +125,10 @@ config MACH_MICRO9S
> Contec Micro9-Slim board.
>
> config MACH_SIM_ONE
> - bool "Support Simplemachines Sim.One board"
> - help
> - Say 'Y' here if you want your kernel to support the
> - Simplemachines Sim.One board.
> + bool "Support Simplemachines Sim.One board"
> + help
> + Say 'Y' here if you want your kernel to support the
> + Simplemachines Sim.One board.
>
> config MACH_SNAPPER_CL15
> bool "Support Bluewater Systems Snapper CL15 Module"
> diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
> index 65a048f..4850f8b 100644
> --- a/arch/arm/mach-hisi/Kconfig
> +++ b/arch/arm/mach-hisi/Kconfig
> @@ -24,13 +24,13 @@ config ARCH_HI3xxx
> Support for Hisilicon Hi36xx SoC family
>
> config ARCH_HIP01
> - bool "Hisilicon HIP01 family"
> - depends on ARCH_MULTI_V7
> - select HAVE_ARM_SCU if SMP
> - select HAVE_ARM_TWD if SMP
> - select ARM_GLOBAL_TIMER
> - help
> - Support for Hisilicon HIP01 SoC family
> + bool "Hisilicon HIP01 family"
> + depends on ARCH_MULTI_V7
> + select HAVE_ARM_SCU if SMP
> + select HAVE_ARM_TWD if SMP
> + select ARM_GLOBAL_TIMER
> + help
> + Support for Hisilicon HIP01 SoC family
>
> config ARCH_HIP04
> bool "Hisilicon HiP04 Cortex A15 family"
> diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
> index fea00812..7b47a3c 100644
> --- a/arch/arm/mach-ixp4xx/Kconfig
> +++ b/arch/arm/mach-ixp4xx/Kconfig
> @@ -22,9 +22,9 @@ config MACH_AVILA
> see <file:Documentation/arm/IXP4xx>.
>
> config MACH_LOFT
> - bool "Loft"
> - depends on MACH_AVILA
> - help
> + bool "Loft"
> + depends on MACH_AVILA
> + help
> Say 'Y' here if you want your kernel to support the Giant
> Shoulder Inc Loft board (a minor variation on the standard
> Gateworks Avila Network Platform).
> @@ -33,7 +33,7 @@ config ARCH_ADI_COYOTE
> bool "Coyote"
> select FORCE_PCI
> help
> - Say 'Y' here if you want your kernel to support the ADI
> + Say 'Y' here if you want your kernel to support the ADI
> Engineering Coyote Gateway Reference Platform. For more
> information on this platform, see <file:Documentation/arm/IXP4xx>.
>
> @@ -56,8 +56,8 @@ config MACH_WG302V2
> config ARCH_IXDP425
> bool "IXDP425"
> help
> - Say 'Y' here if you want your kernel to support Intel's
> - IXDP425 Development Platform (Also known as Richfield).
> + Say 'Y' here if you want your kernel to support Intel's
> + IXDP425 Development Platform (Also known as Richfield).
> For more information on this platform, see <file:Documentation/arm/IXP4xx>.
>
> config MACH_IXDPG425
> @@ -88,12 +88,12 @@ config MACH_KIXRP435
> For more information on this platform, see <file:Documentation/arm/IXP4xx>.
>
> #
> -# IXCDP1100 is the exact same HW as IXDP425, but with a different machine
> -# number from the bootloader due to marketing monkeys, so we just enable it
> +# IXCDP1100 is the exact same HW as IXDP425, but with a different machine
> +# number from the bootloader due to marketing monkeys, so we just enable it
> # by default if IXDP425 is enabled.
> #
> config ARCH_IXCDP1100
> - bool
> + bool
> depends on ARCH_IXDP425
> default y
>
> @@ -200,14 +200,14 @@ config IXP4XX_INDIRECT_PCI
> bool "Use indirect PCI memory access"
> depends on PCI
> help
> - IXP4xx provides two methods of accessing PCI memory space:
> + IXP4xx provides two methods of accessing PCI memory space:
>
> - 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
> - To access PCI via this space, we simply ioremap() the BAR
> - into the kernel and we can use the standard read[bwl]/write[bwl]
> - macros. This is the preferred method due to speed but it
> - limits the system to just 64MB of PCI memory. This can be
> - problematic if using video cards and other memory-heavy devices.
> + 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
> + To access PCI via this space, we simply ioremap() the BAR
> + into the kernel and we can use the standard read[bwl]/write[bwl]
> + macros. This is the preferred method due to speed but it
> + limits the system to just 64MB of PCI memory. This can be
> + problematic if using video cards and other memory-heavy devices.
>
> 2) If > 64MB of memory space is required, the IXP4xx can be
> configured to use indirect registers to access the whole PCI
> diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
> index 94500be..144036e 100644
> --- a/arch/arm/mach-mmp/Kconfig
> +++ b/arch/arm/mach-mmp/Kconfig
> @@ -149,7 +149,7 @@ config CPU_MMP2
> Select code specific to MMP2. MMP2 is ARMv7 compatible.
>
> config USB_EHCI_MV_U2O
> - bool "EHCI support for PXA USB OTG controller"
> + bool "EHCI support for PXA USB OTG controller"
> depends on USB_EHCI_MV
> help
> Enables support for OTG controller which can be switched to host mode.
> diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
> index c4694f2..2e7d733 100644
> --- a/arch/arm/mach-omap1/Kconfig
> +++ b/arch/arm/mach-omap1/Kconfig
> @@ -55,7 +55,7 @@ config OMAP_MUX_WARNINGS
> default y
> help
> Choose Y here to warn whenever driver initialization logic needs
> - to change the pin multiplexing setup. When there are no warnings
> + to change the pin multiplexing setup. When there are no warnings
> printed, it's safe to deselect OMAP_MUX for your product.
>
> comment "OMAP Board Type"
> @@ -65,20 +65,20 @@ config MACH_OMAP_INNOVATOR
> bool "TI Innovator"
> depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
> help
> - TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
> - have such a board.
> + TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
> + have such a board.
>
> config MACH_OMAP_H2
> bool "TI H2 Support"
> depends on ARCH_OMAP1 && ARCH_OMAP16XX
> - help
> + help
> TI OMAP 1610/1611B H2 board support. Say Y here if you have such
> a board.
>
> config MACH_OMAP_H3
> bool "TI H3 Support"
> depends on ARCH_OMAP1 && ARCH_OMAP16XX
> - help
> + help
> TI OMAP 1710 H3 board support. Say Y here if you have such
> a board.
>
> @@ -91,14 +91,14 @@ config MACH_HERALD
> config MACH_OMAP_OSK
> bool "TI OSK Support"
> depends on ARCH_OMAP1 && ARCH_OMAP16XX
> - help
> + help
> TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
> - if you have such a board.
> + if you have such a board.
>
> config OMAP_OSK_MISTRAL
> bool "Mistral QVGA board Support"
> depends on MACH_OMAP_OSK
> - help
> + help
> The OSK supports an optional add-on board with a Quarter-VGA
> touchscreen, PDA-ish buttons, a resume button, bicolor LED,
> and camera connector. Say Y here if you have this board.
> @@ -106,14 +106,14 @@ config OMAP_OSK_MISTRAL
> config MACH_OMAP_PERSEUS2
> bool "TI Perseus2"
> depends on ARCH_OMAP1 && ARCH_OMAP730
> - help
> + help
> Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
> a board.
>
> config MACH_OMAP_FSAMPLE
> bool "TI F-Sample"
> depends on ARCH_OMAP1 && ARCH_OMAP730
> - help
> + help
> Support for TI OMAP 850 F-Sample board. Say Y here if you have such
> a board.
>
> @@ -130,10 +130,10 @@ config MACH_OMAP_PALMZ71
> bool "Palm Zire71"
> depends on ARCH_OMAP1 && ARCH_OMAP15XX
> help
> - Support for the Palm Zire71 PDA. To boot the kernel,
> - you'll need a PalmOS compatible bootloader; check out
> - http://hackndev.com/palm/z71 for more information.
> - Say Y here if you have such a PDA, say N otherwise.
> + Support for the Palm Zire71 PDA. To boot the kernel,
> + you'll need a PalmOS compatible bootloader; check out
> + http://hackndev.com/palm/z71 for more information.
> + Say Y here if you have such a PDA, say N otherwise.
>
> config MACH_OMAP_PALMTT
> bool "Palm Tungsten|T"
> @@ -179,10 +179,10 @@ config MACH_OMAP_GENERIC
> bool "Generic OMAP board"
> depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
> help
> - Support for generic OMAP-1510, 1610 or 1710 board with
> - no FPGA. Can be used as template for porting Linux to
> - custom OMAP boards. Say Y here if you have a custom
> - board.
> + Support for generic OMAP-1510, 1610 or 1710 board with
> + no FPGA. Can be used as template for porting Linux to
> + custom OMAP boards. Say Y here if you have a custom
> + board.
>
> endmenu
>
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 5e33d1a..4db9516d 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -174,16 +174,16 @@ config SOC_TI81XX
> default y
>
> config OMAP_PACKAGE_CBC
> - bool
> + bool
>
> config OMAP_PACKAGE_CBB
> - bool
> + bool
>
> config OMAP_PACKAGE_CUS
> - bool
> + bool
>
> config OMAP_PACKAGE_CBP
> - bool
> + bool
>
> comment "OMAP Legacy Platform Data Board Type"
> depends on ARCH_OMAP2PLUS
> @@ -208,10 +208,10 @@ config MACH_OMAP3_PANDORA
> select OMAP_PACKAGE_CBB
>
> config MACH_NOKIA_N810
> - bool
> + bool
>
> config MACH_NOKIA_N810_WIMAX
> - bool
> + bool
>
> config MACH_NOKIA_N8X0
> bool "Nokia N800/N810"
> diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
> index 7426211..458c02f 100644
> --- a/arch/arm/mach-prima2/Kconfig
> +++ b/arch/arm/mach-prima2/Kconfig
> @@ -21,7 +21,7 @@ config ARCH_ATLAS6
> default y
> select SIRF_IRQ
> help
> - Support for CSR SiRFSoC ARM Cortex A9 Platform
> + Support for CSR SiRFSoC ARM Cortex A9 Platform
>
> config ARCH_ATLAS7
> bool "CSR SiRFSoC ATLAS7 ARM Cortex A7 Platform"
> @@ -31,7 +31,7 @@ config ARCH_ATLAS7
> select HAVE_ARM_SCU if SMP
> select HAVE_SMP
> help
> - Support for CSR SiRFSoC ARM Cortex A7 Platform
> + Support for CSR SiRFSoC ARM Cortex A7 Platform
>
> config ARCH_PRIMA2
> bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
> @@ -40,7 +40,7 @@ config ARCH_PRIMA2
> select ZONE_DMA
> select PRIMA2_TIMER
> help
> - Support for CSR SiRFSoC ARM Cortex A9 Platform
> + Support for CSR SiRFSoC ARM Cortex A9 Platform
>
> config SIRF_IRQ
> bool
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index 686f0bb..bcc6ce4 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -17,8 +17,6 @@ config PLAT_S3C24XX
> help
> Base platform code for any Samsung S3C24XX device
>
> -
> -
> menu "SAMSUNG S3C24XX SoCs Support"
>
> comment "S3C24XX SoCs"
> @@ -138,11 +136,11 @@ config S3C2410_IOTIMING
> and s3c2440/s3c2442 cpu frequency support.
>
> config S3C2410_CPUFREQ_UTILS
> - bool
> - depends on ARM_S3C24XX_CPUFREQ
> - help
> - Internal node to select timing code that is common to the s3c2410
> - and s3c2440/s3c244 cpu frequency support.
> + bool
> + depends on ARM_S3C24XX_CPUFREQ
> + help
> + Internal node to select timing code that is common to the s3c2410
> + and s3c2440/s3c244 cpu frequency support.
>
> # cpu frequency support common to s3c2412, s3c2413 and s3c2442
>
> @@ -280,7 +278,7 @@ config MACH_VR1000
> help
> Say Y here if you are using the Thorcom VR1000 board.
>
> -endif # CPU_S3C2410
> +endif # CPU_S3C2410
>
> config S3C2412_PM_SLEEP
> bool
> @@ -354,7 +352,7 @@ config MACH_VSTMS
> help
> Say Y here if you are using an VSTMS board
>
> -endif # CPU_S3C2412
> +endif # CPU_S3C2412
>
> if CPU_S3C2416
>
> @@ -402,7 +400,7 @@ config MACH_S3C2416_DT
> Note: This is under development and not all peripherals can be supported
> with this machine file.
>
> -endif # CPU_S3C2416
> +endif # CPU_S3C2416
>
> if CPU_S3C2440 || CPU_S3C2442
>
> @@ -528,7 +526,7 @@ config SMDK2440_CPU2440
> default y if ARCH_S3C2440
> select S3C2440_XTAL_16934400
>
> -endif # CPU_S3C2440
> +endif # CPU_S3C2440
>
> if CPU_S3C2442
>
> @@ -548,7 +546,7 @@ config MACH_NEO1973_GTA02
> select S3C24XX_PWM
> select S3C_DEV_USB_HOST
> help
> - Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
> + Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
>
> config MACH_RX1950
> bool "HP iPAQ rx1950"
> @@ -560,9 +558,9 @@ config MACH_RX1950
> select S3C24XX_PWM
> select S3C_DEV_NAND
> help
> - Say Y here if you're using HP iPAQ rx1950
> + Say Y here if you're using HP iPAQ rx1950
>
> -endif # CPU_S3C2442
> +endif # CPU_S3C2442
>
> if CPU_S3C2443 || CPU_S3C2416
>
> @@ -571,7 +569,7 @@ config S3C2443_SETUP_SPI
> help
> Common setup code for SPI GPIO configurations
>
> -endif # CPU_S3C2443 || CPU_S3C2416
> +endif # CPU_S3C2443 || CPU_S3C2416
>
> if CPU_S3C2443
>
> @@ -584,7 +582,7 @@ config MACH_SMDK2443
> help
> Say Y here if you are using an SMDK2443
>
> -endif # CPU_S3C2443
> +endif # CPU_S3C2443
>
> config PM_H1940
> bool
> @@ -593,4 +591,4 @@ config PM_H1940
>
> endmenu # SAMSUNG S3C24XX SoCs Support
>
> -endif # ARCH_S3C24XX
> +endif # ARCH_S3C24XX
> diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
> index 5700822..f6b05277 100644
> --- a/arch/arm/mach-s3c64xx/Kconfig
> +++ b/arch/arm/mach-s3c64xx/Kconfig
> @@ -100,7 +100,7 @@ config S3C64XX_SETUP_SDHCI_GPIO
> config S3C64XX_SETUP_SPI
> bool
> help
> - Common setup code for SPI GPIO configurations
> + Common setup code for SPI GPIO configurations
>
> config S3C64XX_SETUP_USB_PHY
> bool
> @@ -110,7 +110,7 @@ config S3C64XX_SETUP_USB_PHY
> # S36400 Macchine support
>
> config MACH_SMDK6400
> - bool "SMDK6400"
> + bool "SMDK6400"
> depends on ATAGS
> select CPU_S3C6400
> select S3C64XX_SETUP_SDHCI
> @@ -202,7 +202,7 @@ config SMDK6410_SD_CH0
> bool "Use channel 0 only"
> depends on MACH_SMDK6410
> help
> - Select CON7 (channel 0) as the MMC/SD slot, as
> + Select CON7 (channel 0) as the MMC/SD slot, as
> at least some SMDK6410 boards come with the
> resistors fitted so that the card detects for
> channels 0 and 1 are the same.
> @@ -211,7 +211,7 @@ config SMDK6410_SD_CH1
> bool "Use channel 1 only"
> depends on MACH_SMDK6410
> help
> - Select CON6 (channel 1) as the MMC/SD slot, as
> + Select CON6 (channel 1) as the MMC/SD slot, as
> at least some SMDK6410 boards come with the
> resistors fitted so that the card detects for
> channels 0 and 1 are the same.
> @@ -257,7 +257,7 @@ config MACH_NCP
> select S3C_DEV_HSMMC1
> select S3C_DEV_I2C1
> help
> - Machine support for the Samsung NCP
> + Machine support for the Samsung NCP
>
> config MACH_HMT
> bool "Airgoo HMT"
> @@ -289,21 +289,21 @@ config MACH_SMARTQ
> select SAMSUNG_DEV_PWM
> select SAMSUNG_DEV_TS
> help
> - Shared machine support for SmartQ 5/7
> + Shared machine support for SmartQ 5/7
>
> config MACH_SMARTQ5
> bool "SmartQ 5"
> depends on ATAGS
> select MACH_SMARTQ
> help
> - Machine support for the SmartQ 5
> + Machine support for the SmartQ 5
>
> config MACH_SMARTQ7
> bool "SmartQ 7"
> depends on ATAGS
> select MACH_SMARTQ
> help
> - Machine support for the SmartQ 7
> + Machine support for the SmartQ 7
>
> config MACH_WLF_CRAGG_6410
> bool "Wolfson Cragganmore 6410"
> diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
> index ce41c67..b1c092c 100644
> --- a/arch/arm/mach-sa1100/Kconfig
> +++ b/arch/arm/mach-sa1100/Kconfig
> @@ -91,8 +91,8 @@ config SA1100_JORNADA720
> select SA1111
> help
> Say Y here if you want to build a kernel for the HP Jornada 720
> - handheld computer. See
> - <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#>
> + handheld computer. See
> + <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#>
>
> config SA1100_JORNADA720_SSP
> bool "HP Jornada 720 Extended SSP driver"
> diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
> index 8841199..6343961 100644
> --- a/arch/arm/mach-vt8500/Kconfig
> +++ b/arch/arm/mach-vt8500/Kconfig
> @@ -10,9 +10,9 @@ config ARCH_VT8500
>
> config ARCH_WM8505
> bool "VIA/Wondermedia 85xx and WM8650"
> - depends on ARCH_MULTI_V5
> - select ARCH_VT8500
> - select CPU_ARM926T
> + depends on ARCH_MULTI_V5
> + select ARCH_VT8500
> + select CPU_ARM926T
>
> config ARCH_WM8750
> bool "WonderMedia WM8750"
> diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
> index b16ffc0..1fb3a3b 100644
> --- a/arch/arm/mach-w90x900/Kconfig
> +++ b/arch/arm/mach-w90x900/Kconfig
> @@ -23,7 +23,7 @@ config MACH_W90P910EVB
> default y
> select CPU_W90P910
> help
> - Say Y here if you are using the Nuvoton W90P910EVB
> + Say Y here if you are using the Nuvoton W90P910EVB
>
> endmenu
>
> @@ -33,7 +33,7 @@ config MACH_W90P950EVB
> bool "Nuvoton NUC950 Evaluation Board"
> select CPU_NUC950
> help
> - Say Y here if you are using the Nuvoton NUC950EVB
> + Say Y here if you are using the Nuvoton NUC950EVB
>
> endmenu
>
> @@ -43,7 +43,7 @@ config MACH_W90N960EVB
> bool "Nuvoton NUC960 Evaluation Board"
> select CPU_NUC960
> help
> - Say Y here if you are using the Nuvoton NUC960EVB
> + Say Y here if you are using the Nuvoton NUC960EVB
>
> endmenu
>
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index b169e58..23e75a1 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -123,13 +123,13 @@ config CPU_ARM925T
> select CPU_PABRT_LEGACY
> select CPU_THUMB_CAPABLE
> select CPU_TLB_V4WBI if MMU
> - help
> - The ARM925T is a mix between the ARM920T and ARM926T, but with
> + help
> + The ARM925T is a mix between the ARM920T and ARM926T, but with
> different instruction and data caches. It is used in TI's OMAP
> - device family.
> + device family.
>
> - Say Y if you want support for the ARM925T processor.
> - Otherwise, say N.
> + Say Y if you want support for the ARM925T processor.
> + Otherwise, say N.
>
> # ARM926T
> config CPU_ARM926T
> @@ -829,19 +829,19 @@ config HARDEN_BRANCH_PREDICTOR
> depends on CPU_SPECTRE
> default y
> help
> - Speculation attacks against some high-performance processors rely
> - on being able to manipulate the branch predictor for a victim
> - context by executing aliasing branches in the attacker context.
> - Such attacks can be partially mitigated against by clearing
> - internal branch predictor state and limiting the prediction
> - logic in some situations.
> + Speculation attacks against some high-performance processors rely
> + on being able to manipulate the branch predictor for a victim
> + context by executing aliasing branches in the attacker context.
> + Such attacks can be partially mitigated against by clearing
> + internal branch predictor state and limiting the prediction
> + logic in some situations.
>
> - This config option will take CPU-specific actions to harden
> - the branch predictor against aliasing attacks and may rely on
> - specific instruction sequences or control bits being set by
> - the system firmware.
> + This config option will take CPU-specific actions to harden
> + the branch predictor against aliasing attacks and may rely on
> + specific instruction sequences or control bits being set by
> + the system firmware.
>
> - If unsure, say Y.
> + If unsure, say Y.
>
> config TLS_REG_EMUL
> bool
> @@ -983,14 +983,14 @@ if CACHE_L2X0
> config PL310_ERRATA_588369
> bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
> help
> - The PL310 L2 cache controller implements three types of Clean &
> - Invalidate maintenance operations: by Physical Address
> - (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
> - They are architecturally defined to behave as the execution of a
> - clean operation followed immediately by an invalidate operation,
> - both performing to the same memory location. This functionality
> - is not correctly implemented in PL310 prior to r2p0 (fixed in r2p0)
> - as clean lines are not invalidated as a result of these operations.
> + The PL310 L2 cache controller implements three types of Clean &
> + Invalidate maintenance operations: by Physical Address
> + (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
> + They are architecturally defined to behave as the execution of a
> + clean operation followed immediately by an invalidate operation,
> + both performing to the same memory location. This functionality
> + is not correctly implemented in PL310 prior to r2p0 (fixed in r2p0)
> + as clean lines are not invalidated as a result of these operations.
>
> config PL310_ERRATA_727915
> bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> index 53da57f..1946c3d 100644
> --- a/arch/arm/plat-samsung/Kconfig
> +++ b/arch/arm/plat-samsung/Kconfig
> @@ -39,12 +39,12 @@ config SAMSUNG_ATAGS
> def_bool n
> depends on ATAGS
> help
> - This option enables ATAGS based boot support code for
> - Samsung platforms, including static platform devices, legacy
> - clock, timer and interrupt initialization, etc.
> + This option enables ATAGS based boot support code for
> + Samsung platforms, including static platform devices, legacy
> + clock, timer and interrupt initialization, etc.
>
> - Platforms that support only DT based boot need not to select
> - this option.
> + Platforms that support only DT based boot need not to select
> + this option.
>
> if SAMSUNG_ATAGS
>
> @@ -98,7 +98,7 @@ config S3C_DEV_HSMMC3
> config S3C_DEV_HWMON
> bool
> help
> - Compile in platform device definitions for HWMON
> + Compile in platform device definitions for HWMON
>
> config S3C_DEV_I2C1
> bool
> @@ -202,7 +202,7 @@ config S3C64XX_DEV_SPI2
> config SAMSUNG_DEV_TS
> bool
> help
> - Common in platform device definitions for touchscreen device
> + Common in platform device definitions for touchscreen device
>
> config SAMSUNG_DEV_KEYPAD
> bool
> @@ -247,13 +247,13 @@ config SAMSUNG_PM_DEBUG
> for more information.
>
> config S3C_PM_DEBUG_LED_SMDK
> - bool "SMDK LED suspend/resume debugging"
> - depends on PM && (MACH_SMDK6410)
> - help
> - Say Y here to enable the use of the SMDK LEDs on the baseboard
> - for debugging of the state of the suspend and resume process.
> + bool "SMDK LED suspend/resume debugging"
> + depends on PM && (MACH_SMDK6410)
> + help
> + Say Y here to enable the use of the SMDK LEDs on the baseboard
> + for debugging of the state of the suspend and resume process.
>
> - Note, this currently only works for S3C64XX based SMDK boards.
> + Note, this currently only works for S3C64XX based SMDK boards.
>
> config SAMSUNG_PM_CHECK
> bool "S3C2410 PM Suspend Memory CRC"
On Tue, 12 Mar 2019, at 00:26, Enrico Weigelt, metux IT consult wrote:
> Formatting of Kconfig files doesn't look so pretty, so let the
> Great White Handkerchief come around and clean it up.
>
> Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]>
> ---
> arch/arm/Kconfig | 24 +++++++++++-----------
> arch/arm/mach-aspeed/Kconfig | 10 ++++-----
> arch/arm/mach-ep93xx/Kconfig | 8 ++++----
> arch/arm/mach-hisi/Kconfig | 14 ++++++-------
> arch/arm/mach-ixp4xx/Kconfig | 32 ++++++++++++++---------------
> arch/arm/mach-mmp/Kconfig | 2 +-
> arch/arm/mach-omap1/Kconfig | 36 ++++++++++++++++----------------
> arch/arm/mach-omap2/Kconfig | 12 +++++------
> arch/arm/mach-prima2/Kconfig | 6 +++---
> arch/arm/mach-s3c24xx/Kconfig | 32 ++++++++++++++---------------
> arch/arm/mach-s3c64xx/Kconfig | 16 +++++++--------
> arch/arm/mach-sa1100/Kconfig | 4 ++--
> arch/arm/mach-vt8500/Kconfig | 6 +++---
> arch/arm/mach-w90x900/Kconfig | 6 +++---
> arch/arm/mm/Kconfig | 48 +++++++++++++++++++++----------------------
> arch/arm/plat-samsung/Kconfig | 26 +++++++++++------------
> 16 files changed, 140 insertions(+), 142 deletions(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 5085a1e..c89f683 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1115,14 +1115,14 @@ config ARM_ERRATA_764369
> in the diagnostic control register of the SCU.
>
> config ARM_ERRATA_775420
> - bool "ARM errata: A data cache maintenance operation which
> aborts, might lead to deadlock"
> - depends on CPU_V7
> - help
> - This option enables the workaround for the 775420 Cortex-A9 (r2p2,
> - r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
> - operation aborts with MMU exception, it might cause the processor
> - to deadlock. This workaround puts DSB before executing ISB if
> - an abort may occur on cache maintenance.
> + bool "ARM errata: A data cache maintenance operation which aborts,
> might lead to deadlock"
> + depends on CPU_V7
> + help
> + This option enables the workaround for the 775420 Cortex-A9 (r2p2,
> + r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
> + operation aborts with MMU exception, it might cause the processor
> + to deadlock. This workaround puts DSB before executing ISB if
> + an abort may occur on cache maintenance.
>
> config ARM_ERRATA_798181
> bool "ARM errata: TLBI/DSB failure on Cortex-A15"
> @@ -1650,12 +1650,12 @@ config HW_PERF_EVENTS
> depends on ARM_PMU
>
> config SYS_SUPPORTS_HUGETLBFS
> - def_bool y
> - depends on ARM_LPAE
> + def_bool y
> + depends on ARM_LPAE
>
> config HAVE_ARCH_TRANSPARENT_HUGEPAGE
> - def_bool y
> - depends on ARM_LPAE
> + def_bool y
> + depends on ARM_LPAE
>
> config ARCH_WANT_GENERAL_HUGETLB
> def_bool y
> diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
> index 2d5570e..f6eaf05 100644
> --- a/arch/arm/mach-aspeed/Kconfig
> +++ b/arch/arm/mach-aspeed/Kconfig
> @@ -18,9 +18,9 @@ config MACH_ASPEED_G4
> select CPU_ARM926T
> select PINCTRL_ASPEED_G4
> help
> - Say yes if you intend to run on an Aspeed ast2400 or similar
> - fourth generation BMCs, such as those used by OpenPower Power8
> - systems.
> + Say yes if you intend to run on an Aspeed ast2400 or similar
> + fourth generation BMCs, such as those used by OpenPower Power8
> + systems.
>
> config MACH_ASPEED_G5
> bool "Aspeed SoC 5th Generation"
> @@ -28,7 +28,7 @@ config MACH_ASPEED_G5
> select CPU_V6
> select PINCTRL_ASPEED_G5
> help
> - Say yes if you intend to run on an Aspeed ast2500 or similar
> - fifth generation Aspeed BMCs.
> + Say yes if you intend to run on an Aspeed ast2500 or similar
> + fifth generation Aspeed BMCs.
For the ASPEED bits:
Acked-by: Andrew Jeffery <[email protected]>
On 13.03.19 00:54, Andrew Jeffery wrote:
<snip>
>
> For the ASPEED bits:
>
> Acked-by: Andrew Jeffery <[email protected]>
>
shall I split the patch ?
--mtx
--
Enrico Weigelt, metux IT consult
Free software and Linux embedded engineering
[email protected] -- +49-151-27565287
Hi!
On 11/03/2019 14:56, Enrico Weigelt, metux IT consult wrote:
> Formatting of Kconfig files doesn't look so pretty, so let the
> Great White Handkerchief come around and clean it up.
>
> Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]>
> ---
> arch/arm/Kconfig | 24 +++++++++++-----------
> arch/arm/mach-aspeed/Kconfig | 10 ++++-----
> arch/arm/mach-ep93xx/Kconfig | 8 ++++----
> arch/arm/mach-hisi/Kconfig | 14 ++++++-------
> arch/arm/mach-ixp4xx/Kconfig | 32 ++++++++++++++---------------
> arch/arm/mach-mmp/Kconfig | 2 +-
> arch/arm/mach-omap1/Kconfig | 36 ++++++++++++++++----------------
> arch/arm/mach-omap2/Kconfig | 12 +++++------
> arch/arm/mach-prima2/Kconfig | 6 +++---
> arch/arm/mach-s3c24xx/Kconfig | 32 ++++++++++++++---------------
> arch/arm/mach-s3c64xx/Kconfig | 16 +++++++--------
> arch/arm/mach-sa1100/Kconfig | 4 ++--
> arch/arm/mach-vt8500/Kconfig | 6 +++---
> arch/arm/mach-w90x900/Kconfig | 6 +++---
> arch/arm/mm/Kconfig | 48 +++++++++++++++++++++----------------------
> arch/arm/plat-samsung/Kconfig | 26 +++++++++++------------
> 16 files changed, 140 insertions(+), 142 deletions(-)
>
[...]
> diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
> index c095236..597ea24 100644
> --- a/arch/arm/mach-ep93xx/Kconfig
> +++ b/arch/arm/mach-ep93xx/Kconfig
> @@ -125,10 +125,10 @@ config MACH_MICRO9S
> Contec Micro9-Slim board.
>
> config MACH_SIM_ONE
> - bool "Support Simplemachines Sim.One board"
> - help
> - Say 'Y' here if you want your kernel to support the
> - Simplemachines Sim.One board.
> + bool "Support Simplemachines Sim.One board"
> + help
> + Say 'Y' here if you want your kernel to support the
> + Simplemachines Sim.One board.
>
> config MACH_SNAPPER_CL15
> bool "Support Bluewater Systems Snapper CL15 Module"
For EP93xx part:
Acked-by: Alexander Sverdlin <[email protected]>
It makes no sense to split the patch, one of the ARM maintainers
shall decide on this patch anyway. In my personal opinion such a patch
makes little sense if it's not tree-wide.
--
Regards,
Alexander.
"Enrico Weigelt, metux IT consult" <[email protected]> writes:
> Formatting of Kconfig files doesn't look so pretty, so let the
> Great White Handkerchief come around and clean it up.
>
> Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]>
> ---
> arch/arm/mach-ixp4xx/Kconfig | 32 ++++++++++++++---------------
Acked-by: Krzysztof Halasa <[email protected]>
Though I guess things like this one could go straight to "trivial"
without all these Acked overkill.
--
Krzysztof Halasa
Industrial Research Institute for Automation and Measurements PIAP
Al. Jerozolimskie 202, 02-486 Warsaw, Poland