From: Richard Gong <[email protected]>
This is the 1st submission of Intel Stratix10 remote system update (RSU)
driver, which includes 6 patches below:
patch #1 - extend Intel Stratix10 service layer to support RSU
notify feature.
patch #2 - add Intel Stratix10 remote system update binding
patch #3 - add Intel Stratix10 remote system update to the device
tree
patch #4 - add Intel Stratix10 remote system update driver
patch #5 - RSU document sysfs interface
patch #6 - add maintainer for Intel Stratix10 firmware drivers
Intel Stratix10 remote system update driver patches have been reviewed by
Alan Tull and other colleagues at Intel.
The Intel Stratix10 Remote System Update (RSU) driver exposes interfaces
access through the Intel Stratix10 Service Layer to user space via sysfs
interface. The RSU interfaces report and control some of the optional RSU
features on Intel Stratix 10 SoC.
The RSU feature provides a way for customers to update the boot
configuration of a Intel Stratix 10 SoC device with significantly reduced
risk of corrupting the bitstream storage and bricking the system.
Richard Gong (6):
firmware: stratix10-svc: add to support RSU notify
dt-bindings, firmware: add Intel Stratix10 remote system update
binding
arm64: dts: stratix10: add remote system update
firmware: add Intel Stratix10 remote system update driver
firmware: rsu: document sysfs interface
MAINTAINERS: add maintainer for Intel Stratix10 FW drivers
.../testing/sysfs-devices-platform-stratix10-rsu | 78 ++++
.../bindings/firmware/intel,stratix10-rsu.txt | 31 ++
MAINTAINERS | 10 +
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 4 +
drivers/firmware/Kconfig | 18 +
drivers/firmware/Makefile | 1 +
drivers/firmware/stratix10-rsu.c | 428 +++++++++++++++++++++
drivers/firmware/stratix10-svc.c | 43 ++-
include/linux/firmware/intel/stratix10-smc.h | 17 +
.../linux/firmware/intel/stratix10-svc-client.h | 6 +-
10 files changed, 622 insertions(+), 14 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
create mode 100644 Documentation/devicetree/bindings/firmware/intel,stratix10-rsu.txt
create mode 100644 drivers/firmware/stratix10-rsu.c
--
2.7.4
From: Richard Gong <[email protected]>
Add Intel Stratix10 remote system update to the device tree
Signed-off-by: Richard Gong <[email protected]>
Reviewed-by: Alan Tull <[email protected]>
---
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 7c649f6..79ae522 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -596,6 +596,10 @@
fpga_mgr: fpga-mgr {
compatible = "intel,stratix10-soc-fpga-mgr";
};
+
+ rsu: rsu {
+ compatible = "intel,stratix10-rsu";
+ };
};
};
};
--
2.7.4
From: Richard Gong <[email protected]>
Add a device tree binding for the Intel Stratix10 remote system
update (RSU) driver
Signed-off-by: Richard Gong <[email protected]>
Reviewed-by: Alan Tull <[email protected]>
---
.../bindings/firmware/intel,stratix10-rsu.txt | 31 ++++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/firmware/intel,stratix10-rsu.txt
diff --git a/Documentation/devicetree/bindings/firmware/intel,stratix10-rsu.txt b/Documentation/devicetree/bindings/firmware/intel,stratix10-rsu.txt
new file mode 100644
index 0000000..b6250eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/intel,stratix10-rsu.txt
@@ -0,0 +1,31 @@
+Intel Remote System Update Driver for Stratix10 SoC
+============================================
+The Intel Remote System Update (RSU) driver exposes interfaces
+accessed through the Intel Service Layer to user space via sysfs
+interface. The RSU interfaces report and control some of the optional
+RSU features on Intel Stratix 10 SoC.
+
+The RSU feature provides a way for customers to update the boot
+configuration of a Intel Stratix 10 SoC device with significantly reduced
+risk of corrupting the bitstream storage and bricking the system.
+
+Required properties:
+-------------------
+The rsu node has the following mandatory properties, must be located under
+the firmware/svc node.
+
+- compatible: "intel,stratix10-rsu"
+
+Example:
+-------
+ firmware {
+ svc {
+ compatible = "intel,stratix10-svc";
+ method = "smc";
+ memory-region = <&service_reserved>;
+
+ rsu: rsu {
+ compatible = "intel,stratix10-rsu";
+ };
+ };
+ };
--
2.7.4
From: Richard Gong <[email protected]>
Extend Intel Stratix10 service layer to support RSU notify feature.
RSU is used to provide our customers with protection against loading bad
bitstream onto their devices when those devices are booting from flash
RSU notify provides users with an API to notify the firmware of the
state of hard processor system.
Signed-off-by: Richard Gong <[email protected]>
Reviewed-by: Alan Tull <[email protected]>
---
drivers/firmware/stratix10-svc.c | 43 +++++++++++++++-------
include/linux/firmware/intel/stratix10-smc.h | 17 +++++++++
.../linux/firmware/intel/stratix10-svc-client.h | 6 ++-
3 files changed, 52 insertions(+), 14 deletions(-)
diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
index 6e65148..1426900 100644
--- a/drivers/firmware/stratix10-svc.c
+++ b/drivers/firmware/stratix10-svc.c
@@ -295,7 +295,12 @@ static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data,
case COMMAND_RECONFIG_STATUS:
cb_data->status = BIT(SVC_STATUS_RECONFIG_COMPLETED);
break;
+ case COMMAND_RSU_STATUS:
+ cb_data->kaddr1 = &res;
+ cb_data->status = BIT(SVC_STATUS_RSU_OK);
+ break;
case COMMAND_RSU_UPDATE:
+ case COMMAND_RSU_NOTIFY:
cb_data->status = BIT(SVC_STATUS_RSU_OK);
break;
default:
@@ -386,6 +391,11 @@ static int svc_normal_to_secure_thread(void *data)
a1 = pdata->arg[0];
a2 = 0;
break;
+ case COMMAND_RSU_NOTIFY:
+ a0 = INTEL_SIP_SMC_RSU_NOTIFY;
+ a1 = pdata->arg[0];
+ a2 = 0;
+ break;
default:
pr_warn("it shouldn't happen\n");
break;
@@ -402,19 +412,6 @@ static int svc_normal_to_secure_thread(void *data)
(unsigned int)res.a1, (unsigned int)res.a2);
pr_debug(" res.a3=0x%016x\n", (unsigned int)res.a3);
- if (pdata->command == COMMAND_RSU_STATUS) {
- if (res.a0 == INTEL_SIP_SMC_RSU_ERROR)
- cbdata->status = BIT(SVC_STATUS_RSU_ERROR);
- else
- cbdata->status = BIT(SVC_STATUS_RSU_OK);
-
- cbdata->kaddr1 = &res;
- cbdata->kaddr2 = NULL;
- cbdata->kaddr3 = NULL;
- pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
- continue;
- }
-
switch (res.a0) {
case INTEL_SIP_SMC_STATUS_OK:
svc_thread_recv_status_ok(pdata, cbdata, res);
@@ -438,7 +435,27 @@ static int svc_normal_to_secure_thread(void *data)
pr_debug("%s: STATUS_REJECTED\n", __func__);
break;
case INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR:
+ case INTEL_SIP_SMC_RSU_ERROR:
pr_err("%s: STATUS_ERROR\n", __func__);
+ switch (pdata->command) {
+ /* for FPGA mgr */
+ case COMMAND_RECONFIG_DATA_CLAIM:
+ case COMMAND_RECONFIG:
+ case COMMAND_RECONFIG_DATA_SUBMIT:
+ case COMMAND_RECONFIG_STATUS:
+ cbdata->status =
+ BIT(SVC_STATUS_RECONFIG_ERROR);
+ break;
+
+ /* for RSU */
+ case COMMAND_RSU_STATUS:
+ case COMMAND_RSU_UPDATE:
+ case COMMAND_RSU_NOTIFY:
+ cbdata->status =
+ BIT(SVC_STATUS_RSU_ERROR);
+ break;
+ }
+
cbdata->status = BIT(SVC_STATUS_RECONFIG_ERROR);
cbdata->kaddr1 = NULL;
cbdata->kaddr2 = NULL;
diff --git a/include/linux/firmware/intel/stratix10-smc.h b/include/linux/firmware/intel/stratix10-smc.h
index 01684d9..372f275 100644
--- a/include/linux/firmware/intel/stratix10-smc.h
+++ b/include/linux/firmware/intel/stratix10-smc.h
@@ -329,3 +329,20 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_ECC_DBE)
#endif
+
+/*
+ * Request INTEL_SIP_SMC_RSU_NOTIFY
+ *
+ * Sync call used by service driver at EL1 to report HPS sw state is RSU_NOTIFY
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_NOTIFY
+ * a1 32bit value representing HPS software status
+ * a2-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_NOTIFY 14
+#define INTEL_SIP_SMC_RSU_NOTIFY \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_NOTIFY)
diff --git a/include/linux/firmware/intel/stratix10-svc-client.h b/include/linux/firmware/intel/stratix10-svc-client.h
index e521f17..eda722c 100644
--- a/include/linux/firmware/intel/stratix10-svc-client.h
+++ b/include/linux/firmware/intel/stratix10-svc-client.h
@@ -95,6 +95,9 @@ struct stratix10_svc_chan;
*
* @COMMAND_RSU_UPDATE: set the offset of the bitstream to boot after reboot,
* return status is SVC_STATUS_RSU_OK or SVC_STATUS_RSU_ERROR
+ *
+ * @COMMAND_RSU_NOTIFY: report the status of HPS software to firmware, return
+ * status is SVC_STATUS_RSU_OK or SVC_STATUS_RSU_ERROR
*/
enum stratix10_svc_command_code {
COMMAND_NOOP = 0,
@@ -103,7 +106,8 @@ enum stratix10_svc_command_code {
COMMAND_RECONFIG_DATA_CLAIM,
COMMAND_RECONFIG_STATUS,
COMMAND_RSU_STATUS,
- COMMAND_RSU_UPDATE
+ COMMAND_RSU_UPDATE,
+ COMMAND_RSU_NOTIFY
};
/**
--
2.7.4
From: Richard Gong <[email protected]>
Describe Intel Stratix10 Remote System Update (RSU) device attributes
Signed-off-by: Richard Gong <[email protected]>
Reviewed-by: Alan Tull <[email protected]>
---
.../testing/sysfs-devices-platform-stratix10-rsu | 78 ++++++++++++++++++++++
1 file changed, 78 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
new file mode 100644
index 0000000..cb461ee
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
@@ -0,0 +1,78 @@
+ Intel Stratix10 Remote System Update (RSU) device attributes
+
+What: /sys/devices/platform/soc:firmware:svc/soc:firmware:svc:rsu/current_image
+Date: April 2019
+KernelVersion: 5.2
+Contact: Richard Gong <[email protected]>
+Description:
+ (RO) the address of image currently running in flash.
+
+What: /sys/devices/platform/soc:firmware:svc/soc:firmware:svc:rsu/fail_image
+Date: April 2019
+KernelVersion: 5.2
+Contact: Richard Gong <[email protected]>
+Description:
+ (RO) the address of failed image in flash.
+
+What: /sys/devices/platform/soc:firmware:svc/soc:firmware:svc:rsu/state
+Date: April 2019
+KernelVersion: 5.2
+Contact: Richard Gong <[email protected]>
+Description:
+ (RO) the state of RSU system.
+ The state field has two parts: major error code in upper 16 bits and minor error code
+ in lower 16 bits.
+ 1. Major error code
+ 0xF001 -- bitstream error
+ 0xF002 -- hardware access failure
+ 0xF003 -- bitstream corruption
+ 0xF004 -- internal error
+ 0xF005 -- device error
+ 0xF006 -- HPS watchdog timeout
+ 0xF007 -- internal unknown error
+ 2: Minor error code
+ Currently used only when major error is 0xF006 (HPS watchdog timeout), in which
+ case the minor error code is the value reported by HPS to firmware through the RSU notify
+ command before the watchdog timeout occurs.
+
+What: /sys/devices/platform/soc:firmware:svc/soc:firmware:svc:rsu/version
+Date: April 2019
+KernelVersion: 5.2
+Contact: Richard Gong <[email protected]>
+Description:
+ (RO) the version number of RSU firmware.
+
+What: /sys/devices/platform/soc:firmware:svc/soc:firmware:svc:rsu/error_location
+Date: April 2019
+KernelVersion: 5.2
+Contact: Richard Gong <[email protected]>
+Description:
+ (RO) the error offset inside the image that failed.
+
+What: /sys/devices/platform/soc:firmware:svc/soc:firmware:svc:rsu/error_details
+Date: April 2019
+KernelVersion: 5.2
+Contact: Richard Gong <[email protected]>
+Description:
+ (RO) error code.
+
+What: /sys/devices/platform/soc:firmware:svc/soc:firmware:svc:rsu/reboot_image
+Date: April 2019
+KernelVersion: 5.2
+Contact: Richard Gong <[email protected]>
+Description:
+ (WO) the address of image to be loaded on next reboot command.
+
+What: /sys/devices/platform/soc:firmware:svc/soc:firmware:svc:rsu/notify
+Date: April 2019
+KernelVersion: 5.2
+Contact: Richard Gong <[email protected]>
+Description:
+ (WO) inform firmware that the current software state as a 16-bit
+ numerical value below:
+ 0 -- the first stage bootloader didn't run or didn't reach the
+ point of launching second stage bootloader
+ 1 -- failed in second bootloader or didn't get to the point of
+ launching the operating system
+ 2 -- both first and second stage bootloader ran and the operating
+ system launch was attempted.
--
2.7.4
From: Richard Gong <[email protected]>
Add myself as maintainer for the newly created Intel Stratix10
firmware drivers.
Signed-off-by: Richard Gong <[email protected]>
Reviewed-by: Alan Tull <[email protected]>
---
MAINTAINERS | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 4cf3cbf..d7054f5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8039,6 +8039,16 @@ S: Supported
F: drivers/infiniband/hw/i40iw/
F: include/uapi/rdma/i40iw-abi.h
+INTEL STRATIX10 FIRMWARE DRIVERS
+M: Richard Gong <[email protected]>
+L: [email protected]
+S: Maintained
+F: drivers/firmware/stratix10*
+F: include/linux/firmware/intel/
+F: Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
+F: Documentation/devicetree/bindings/firmware/intel,stratix10-rsu.txt
+F: Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
+
INTEL TELEMETRY DRIVER
M: Rajneesh Bhardwaj <[email protected]>
M: "David E. Box" <[email protected]>
--
2.7.4
From: Richard Gong <[email protected]>
The Intel Remote System Update (RSU) driver exposes interfaces access
through the Intel Service Layer to user space via sysfs interface.
The RSU interfaces report and control some of the optional RSU features
on Intel Stratix 10 SoC.
The RSU feature provides a way for customers to update the boot
configuration of a Intel Stratix 10 SoC device with significantly reduced
risk of corrupting the bitstream storage and bricking the system.
Signed-off-by: Richard Gong <[email protected]>
Reviewed-by: Alan Tull <[email protected]>
---
drivers/firmware/Kconfig | 18 ++
drivers/firmware/Makefile | 1 +
drivers/firmware/stratix10-rsu.c | 428 +++++++++++++++++++++++++++++++++++++++
3 files changed, 447 insertions(+)
create mode 100644 drivers/firmware/stratix10-rsu.c
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index cac16c4..9e61d2f 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -228,6 +228,24 @@ config INTEL_STRATIX10_SERVICE
Say Y here if you want Stratix10 service layer support.
+config INTEL_STRATIX10_RSU
+ tristate "Intel Stratix10 Remote System Update"
+ depends on INTEL_STRATIX10_SERVICE
+ help
+ The Intel Remote System Update (RSU) driver exposes interfaces
+ access through the Intel Service Layer to user space via Sysfs
+ device attribute nodes. The RSU interfaces report/control some of
+ the optional RSU features of the Stratix 10 SoC FPGA.
+
+ The RSU feature provides a way for customers to update the boot
+ configuration of a Stratix 10 SoC device with significantly reduced
+ risk of corrupting the bitstream storage and bricking the system.
+
+ Enable RSU support if you are using an Intel SoC FPGA with the RSU
+ feature enabled and you want Linux user space control.
+
+ Say Y here if you want Intel RSU support.
+
config QCOM_SCM
bool
depends on ARM || ARM64
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 80feb63..41b6fa3 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_EDD) += edd.o
obj-$(CONFIG_EFI_PCDP) += pcdp.o
obj-$(CONFIG_DMIID) += dmi-id.o
obj-$(CONFIG_INTEL_STRATIX10_SERVICE) += stratix10-svc.o
+obj-$(CONFIG_INTEL_STRATIX10_RSU) += stratix10-rsu.o
obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o
obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
diff --git a/drivers/firmware/stratix10-rsu.c b/drivers/firmware/stratix10-rsu.c
new file mode 100644
index 0000000..bf410f86
--- /dev/null
+++ b/drivers/firmware/stratix10-rsu.c
@@ -0,0 +1,428 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2019, Intel Corporation
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/firmware/intel/stratix10-svc-client.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+
+#define RSU_VERSION_MASK GENMASK_ULL(31, 0)
+#define RSU_STATE_MASK GENMASK_ULL(63, 32)
+#define RSU_ERROR_DETAIL_MASK GENMASK_ULL(31, 0)
+#define RSU_ERROR_LOCATION_MASK GENMASK_ULL(63, 32)
+
+#define RSU_REQUEST_TIMEOUT (msecs_to_jiffies(SVC_RSU_REQUEST_TIMEOUT_MS))
+
+/**
+ * struct stratix10_rsu_priv - rsu data structure
+ * @chan: pointer to the allocated service channel
+ * @client: active service client
+ * @completion: state for callback completion
+ * @status.current_image: address of image currently running in flash
+ * @status.fail_image: address of failed image in flash
+ * @status.version: the version number of RSU firmware
+ * @status.state: the state of RSU system
+ * @status.error_details: error code
+ * @status.error_location: the error offset inside the image that failed
+ */
+struct stratix10_rsu_priv {
+ struct stratix10_svc_chan *chan;
+ struct stratix10_svc_client client;
+ struct completion completion;
+ struct mutex lock;
+ struct {
+ unsigned long current_image;
+ unsigned long fail_image;
+ unsigned int version;
+ unsigned int state;
+ unsigned int error_details;
+ unsigned int error_location;
+ } status;
+};
+
+/**
+ * rsu_status_callback() - Status callback from Intel service layer
+ * @client: pointer to service client
+ * @data: pointer to callback data structure
+ *
+ * Callback from Intel service layer for RSU status request. Status is
+ * only updated after a system reboot, so a get updated status call is
+ * made during driver probe.
+ */
+static void rsu_status_callback(struct stratix10_svc_client *client,
+ struct stratix10_svc_cb_data *data)
+{
+ struct stratix10_rsu_priv *priv = client->priv;
+ struct arm_smccc_res *res = (struct arm_smccc_res *)data->kaddr1;
+
+ if (data->status == BIT(SVC_STATUS_RSU_OK)) {
+ priv->status.version = FIELD_GET(RSU_VERSION_MASK,
+ res->a2);
+ priv->status.state = FIELD_GET(RSU_STATE_MASK, res->a2);
+ priv->status.fail_image = res->a1;
+ priv->status.current_image = res->a0;
+ priv->status.error_location =
+ FIELD_GET(RSU_ERROR_LOCATION_MASK, res->a3);
+ priv->status.error_details =
+ FIELD_GET(RSU_ERROR_DETAIL_MASK, res->a3);
+ } else {
+ dev_err(client->dev, "COMMAND_RSU_STATUS returned 0x%lX\n",
+ res->a0);
+ priv->status.version = 0;
+ priv->status.state = 0;
+ priv->status.fail_image = 0;
+ priv->status.current_image = 0;
+ priv->status.error_location = 0;
+ priv->status.error_details = 0;
+ }
+
+ complete(&priv->completion);
+}
+
+/**
+ * rsu_update_callback() - Update callback from Intel service layer
+ * @client: pointer to client
+ * @data: pointer to callback data structure
+ *
+ * Callback from Intel service layer for RSU update request.
+ */
+static void rsu_update_callback(struct stratix10_svc_client *client,
+ struct stratix10_svc_cb_data *data)
+{
+ struct stratix10_rsu_priv *priv = client->priv;
+
+ if (data->status != BIT(SVC_STATUS_RSU_OK))
+ dev_err(client->dev, "COMMAND_RSU_UPDATE returned %i\n",
+ data->status);
+ complete(&priv->completion);
+}
+
+/*
+ * rsu_notify_callback() - Notify callback from Intel service layer
+ * @client: pointer to client
+ * @data: pointer to callback data structure
+ *
+ * Callback from Intel service layer for RSU notify request.
+ */
+static void rsu_notify_callback(struct stratix10_svc_client *client,
+ struct stratix10_svc_cb_data *data)
+{
+ struct stratix10_rsu_priv *priv = client->priv;
+
+ if (data->status != BIT(SVC_STATUS_RSU_OK))
+ dev_err(client->dev, "COMMAND_RSU_NOTIFY returned %i\n",
+ data->status);
+ complete(&priv->completion);
+}
+
+/**
+ * rsu_send_msg() - send a message to Intel service layer
+ * @priv: pointer to rsu private data
+ * @command: RSU status or update command
+ * @arg: the request argument, the bitstream address or notify status
+ * @callback: function pointer for the callback (status or update)
+ *
+ * Start an Intel service layer transaction to perform the SMC call that
+ * is necessary to get RSU boot log or set the address of bitstream to
+ * boot after reboot.
+ *
+ * Returns 0 on success or -ETIMEDOUT on error.
+ */
+static int rsu_send_msg(struct stratix10_rsu_priv *priv,
+ enum stratix10_svc_command_code command,
+ unsigned long arg,
+ void (*callback)(struct stratix10_svc_client *client,
+ struct stratix10_svc_cb_data *data))
+{
+ struct stratix10_svc_client_msg msg;
+ int ret;
+
+ mutex_lock(&priv->lock);
+ reinit_completion(&priv->completion);
+ priv->client.receive_cb = callback;
+
+ msg.command = command;
+ if (arg)
+ msg.arg[0] = arg;
+
+ ret = stratix10_svc_send(priv->chan, &msg);
+ if (ret < 0)
+ goto status_done;
+
+ ret = wait_for_completion_interruptible_timeout(
+ &priv->completion, RSU_REQUEST_TIMEOUT);
+ if (!ret) {
+ dev_err(priv->client.dev,
+ "timeout waiting for COMMAND_RSU_STATUS\n");
+ ret = -ETIMEDOUT;
+ goto status_done;
+ } else if (ret < 0) {
+ dev_err(priv->client.dev,
+ "error (%d) waiting for COMMAND_RSU_STATUS\n", ret);
+ goto status_done;
+ } else {
+ ret = 0;
+ }
+
+status_done:
+ stratix10_svc_done(priv->chan);
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
+/*
+ * This driver exposes some optional features of the Intel Stratix 10 SoC FPGA.
+ * The SysFS interfaces exposed here are FPGA Remote System Update (RSU)
+ * related. They allow user space software to query the configuration system
+ * status and to request optional reboot behavior specific to Intel FPGAs.
+ */
+
+static ssize_t current_image_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return scnprintf(buf, PAGE_SIZE, "%ld", priv->status.current_image);
+}
+
+static ssize_t fail_image_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return scnprintf(buf, PAGE_SIZE, "%ld", priv->status.fail_image);
+}
+
+static ssize_t version_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return scnprintf(buf, PAGE_SIZE, "%d", priv->status.version);
+}
+
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return scnprintf(buf, PAGE_SIZE, "%d", priv->status.state);
+}
+
+static ssize_t error_location_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return scnprintf(buf, PAGE_SIZE, "%d", priv->status.error_location);
+}
+
+static ssize_t error_details_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return scnprintf(buf, PAGE_SIZE, "%d", priv->status.error_details);
+}
+
+static ssize_t reboot_image_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+ unsigned long address;
+ int ret;
+
+ if (priv == 0)
+ return -ENODEV;
+
+ ret = kstrtoul(buf, 0, &address);
+ if (ret)
+ return ret;
+
+ rsu_send_msg(priv, COMMAND_RSU_UPDATE,
+ address, rsu_update_callback);
+
+ return count;
+}
+
+static ssize_t notify_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+ unsigned long status;
+ int ret;
+
+ if (priv == 0)
+ return -ENODEV;
+
+ ret = kstrtoul(buf, 0, &status);
+ if (ret)
+ return ret;
+
+ rsu_send_msg(priv, COMMAND_RSU_NOTIFY,
+ status, rsu_notify_callback);
+
+ return count;
+}
+
+static DEVICE_ATTR_RO(current_image);
+static DEVICE_ATTR_RO(fail_image);
+static DEVICE_ATTR_RO(state);
+static DEVICE_ATTR_RO(version);
+static DEVICE_ATTR_RO(error_location);
+static DEVICE_ATTR_RO(error_details);
+static DEVICE_ATTR_WO(reboot_image);
+static DEVICE_ATTR_WO(notify);
+
+static struct attribute *attrs[] = {
+ &dev_attr_current_image.attr,
+ &dev_attr_fail_image.attr,
+ &dev_attr_state.attr,
+ &dev_attr_version.attr,
+ &dev_attr_error_location.attr,
+ &dev_attr_error_details.attr,
+ &dev_attr_reboot_image.attr,
+ &dev_attr_notify.attr,
+ NULL
+};
+
+static struct attribute_group attr_group = {
+ .attrs = attrs
+};
+
+static int stratix10_rsu_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct stratix10_rsu_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->client.dev = dev;
+ priv->client.receive_cb = NULL;
+ priv->client.priv = priv;
+ priv->status.current_image = 0;
+ priv->status.fail_image = 0;
+ priv->status.error_location = 0;
+ priv->status.error_details = 0;
+ priv->status.version = 0;
+ priv->status.state = 0;
+
+ mutex_init(&priv->lock);
+ priv->chan = stratix10_svc_request_channel_byname(&priv->client,
+ SVC_CLIENT_RSU);
+ if (IS_ERR(priv->chan)) {
+ dev_err(dev, "couldn't get service channel (%s)\n",
+ SVC_CLIENT_RSU);
+ return PTR_ERR(priv->chan);
+ }
+
+ init_completion(&priv->completion);
+ platform_set_drvdata(pdev, priv);
+
+ /* status is only updated after reboot */
+ ret = rsu_send_msg(priv, COMMAND_RSU_STATUS,
+ 0, rsu_status_callback);
+ if (ret) {
+ dev_err(dev, "Error getting RSU status (%i)\n", ret);
+ stratix10_svc_free_channel(priv->chan);
+ return ret;
+ }
+
+ ret = sysfs_create_group(&dev->kobj, &attr_group);
+ if (ret)
+ stratix10_svc_free_channel(priv->chan);
+
+ pr_info("Intel RSU Driver Initialized\n");
+ return ret;
+}
+
+static int stratix10_rsu_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct stratix10_rsu_priv *priv = platform_get_drvdata(pdev);
+
+ sysfs_remove_group(&dev->kobj, &attr_group);
+ stratix10_svc_free_channel(priv->chan);
+ return 0;
+}
+
+static const struct of_device_id stratix10_rsu_of_match[] = {
+ {.compatible = "intel,stratix10-rsu"},
+ {},
+};
+
+static struct platform_driver stratix10_rsu_driver = {
+ .probe = stratix10_rsu_probe,
+ .remove = stratix10_rsu_remove,
+ .driver = {
+ .name = "stratix10-rsu",
+ .of_match_table = stratix10_rsu_of_match,
+ },
+};
+
+static int __init stratix10_rsu_init(void)
+{
+ struct device_node *fw_np;
+ struct device_node *np;
+ int ret;
+
+ fw_np = of_find_node_by_name(NULL, "svc");
+ if (!fw_np)
+ return -ENODEV;
+
+ np = of_find_matching_node(fw_np, stratix10_rsu_of_match);
+ if (!np)
+ return -ENODEV;
+
+ of_node_put(np);
+ ret = of_platform_populate(fw_np, stratix10_rsu_of_match, NULL, NULL);
+ if (ret)
+ return ret;
+
+ return platform_driver_register(&stratix10_rsu_driver);
+}
+
+static void __exit stratix10_rsu_exit(void)
+{
+ return platform_driver_unregister(&stratix10_rsu_driver);
+}
+
+module_init(stratix10_rsu_init);
+module_exit(stratix10_rsu_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Remote System Update Driver");
+MODULE_AUTHOR("Richard Gong <[email protected]>");
--
2.7.4
On Tue, Apr 09, 2019 at 01:46:00PM -0500, [email protected] wrote:
> +/*
> + * This driver exposes some optional features of the Intel Stratix 10 SoC FPGA.
> + * The SysFS interfaces exposed here are FPGA Remote System Update (RSU)
It has never been "SysFS", it has always been "sysfs".
> + * related. They allow user space software to query the configuration system
> + * status and to request optional reboot behavior specific to Intel FPGAs.
> + */
> +
> +static ssize_t current_image_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
> +
> + if (!priv)
> + return -ENODEV;
> +
> + return scnprintf(buf, PAGE_SIZE, "%ld", priv->status.current_image);
While it is all nice and fine to try to be "safe" and use scnprintf() it
turns out that if you EVER care about the size of a sysfs buffer, your
code is doing something wrong. This can just be a simple sprintf()
call.
Same goes for everywhere in this file.
thanks,
greg k-h
On Tue, Apr 09, 2019 at 01:46:00PM -0500, [email protected] wrote:
> +static ssize_t reboot_image_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
> + unsigned long address;
> + int ret;
> +
> + if (priv == 0)
> + return -ENODEV;
> +
> + ret = kstrtoul(buf, 0, &address);
> + if (ret)
> + return ret;
> +
> + rsu_send_msg(priv, COMMAND_RSU_UPDATE,
> + address, rsu_update_callback);
> +
> + return count;
> +}
No error checking that the value was a sane one? That this message
actually worked? I can write any random number in here and have no
error happen at all? Nice! :(
> +static ssize_t notify_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
> + unsigned long status;
> + int ret;
> +
> + if (priv == 0)
> + return -ENODEV;
> +
> + ret = kstrtoul(buf, 0, &status);
> + if (ret)
> + return ret;
> +
> + rsu_send_msg(priv, COMMAND_RSU_NOTIFY,
> + status, rsu_notify_callback);
> +
> + return count;
> +}
Same comment here.
> +
> +static DEVICE_ATTR_RO(current_image);
> +static DEVICE_ATTR_RO(fail_image);
> +static DEVICE_ATTR_RO(state);
> +static DEVICE_ATTR_RO(version);
> +static DEVICE_ATTR_RO(error_location);
> +static DEVICE_ATTR_RO(error_details);
> +static DEVICE_ATTR_WO(reboot_image);
> +static DEVICE_ATTR_WO(notify);
> +
> +static struct attribute *attrs[] = {
> + &dev_attr_current_image.attr,
> + &dev_attr_fail_image.attr,
> + &dev_attr_state.attr,
> + &dev_attr_version.attr,
> + &dev_attr_error_location.attr,
> + &dev_attr_error_details.attr,
> + &dev_attr_reboot_image.attr,
> + &dev_attr_notify.attr,
> + NULL
> +};
> +
> +static struct attribute_group attr_group = {
> + .attrs = attrs
> +};
ATTRIBUTE_GROUP()?
> +static int stratix10_rsu_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct stratix10_rsu_priv *priv;
> + int ret;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->client.dev = dev;
> + priv->client.receive_cb = NULL;
> + priv->client.priv = priv;
> + priv->status.current_image = 0;
> + priv->status.fail_image = 0;
> + priv->status.error_location = 0;
> + priv->status.error_details = 0;
> + priv->status.version = 0;
> + priv->status.state = 0;
> +
> + mutex_init(&priv->lock);
> + priv->chan = stratix10_svc_request_channel_byname(&priv->client,
> + SVC_CLIENT_RSU);
> + if (IS_ERR(priv->chan)) {
> + dev_err(dev, "couldn't get service channel (%s)\n",
> + SVC_CLIENT_RSU);
> + return PTR_ERR(priv->chan);
> + }
> +
> + init_completion(&priv->completion);
> + platform_set_drvdata(pdev, priv);
> +
> + /* status is only updated after reboot */
> + ret = rsu_send_msg(priv, COMMAND_RSU_STATUS,
> + 0, rsu_status_callback);
> + if (ret) {
> + dev_err(dev, "Error getting RSU status (%i)\n", ret);
> + stratix10_svc_free_channel(priv->chan);
> + return ret;
> + }
> +
> + ret = sysfs_create_group(&dev->kobj, &attr_group);
Why not add this to the device earlier so that the driver core creates
it all for your automatically?
Or does platform devices not do this? I can never remember...
> + if (ret)
> + stratix10_svc_free_channel(priv->chan);
> +
> + pr_info("Intel RSU Driver Initialized\n");
Don't be noisy, if all goes well, never say anything.
thanks,
greg k-h
On Tue, Apr 09, 2019 at 01:46:01PM -0500, [email protected] wrote:
> From: Richard Gong <[email protected]>
>
> Describe Intel Stratix10 Remote System Update (RSU) device attributes
>
> Signed-off-by: Richard Gong <[email protected]>
> Reviewed-by: Alan Tull <[email protected]>
> ---
> .../testing/sysfs-devices-platform-stratix10-rsu | 78 ++++++++++++++++++++++
> 1 file changed, 78 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
>
> diff --git a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
> new file mode 100644
> index 0000000..cb461ee
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
> @@ -0,0 +1,78 @@
> + Intel Stratix10 Remote System Update (RSU) device attributes
> +
> +What: /sys/devices/platform/soc:firmware:svc/soc:firmware:svc:rsu/current_image
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Richard Gong <[email protected]>
> +Description:
> + (RO) the address of image currently running in flash.
> +
> +What: /sys/devices/platform/soc:firmware:svc/soc:firmware:svc:rsu/fail_image
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Richard Gong <[email protected]>
> +Description:
> + (RO) the address of failed image in flash.
> +
> +What: /sys/devices/platform/soc:firmware:svc/soc:firmware:svc:rsu/state
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Richard Gong <[email protected]>
> +Description:
> + (RO) the state of RSU system.
> + The state field has two parts: major error code in upper 16 bits and minor error code
> + in lower 16 bits.
> + 1. Major error code
> + 0xF001 -- bitstream error
> + 0xF002 -- hardware access failure
> + 0xF003 -- bitstream corruption
> + 0xF004 -- internal error
> + 0xF005 -- device error
> + 0xF006 -- HPS watchdog timeout
> + 0xF007 -- internal unknown error
> + 2: Minor error code
> + Currently used only when major error is 0xF006 (HPS watchdog timeout), in which
> + case the minor error code is the value reported by HPS to firmware through the RSU notify
> + command before the watchdog timeout occurs.
Properly wrap your lines at 72 colums.
On Tue, Apr 09, 2019 at 01:46:01PM -0500, [email protected] wrote:
> From: Richard Gong <[email protected]>
>
> Describe Intel Stratix10 Remote System Update (RSU) device attributes
>
> Signed-off-by: Richard Gong <[email protected]>
> Reviewed-by: Alan Tull <[email protected]>
> ---
> .../testing/sysfs-devices-platform-stratix10-rsu | 78 ++++++++++++++++++++++
> 1 file changed, 78 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
>
> diff --git a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
> new file mode 100644
> index 0000000..cb461ee
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
> @@ -0,0 +1,78 @@
> + Intel Stratix10 Remote System Update (RSU) device attributes
> +
> +What: /sys/devices/platform/soc:firmware:svc/soc:firmware:svc:rsu/current_image
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Richard Gong <[email protected]>
> +Description:
> + (RO) the address of image currently running in flash.
> +
> +What: /sys/devices/platform/soc:firmware:svc/soc:firmware:svc:rsu/fail_image
> +Date: April 2019
> +KernelVersion: 5.2
> +Contact: Richard Gong <[email protected]>
> +Description:
> + (RO) the address of failed image in flash.
Use tabs everywhere please, do not mix spaces for some attributes and
tabs for others.
thanks,
gre gk-h
On Tue, Apr 09, 2019 at 01:45:58PM -0500, [email protected] wrote:
> From: Richard Gong <[email protected]>
>
> Add a device tree binding for the Intel Stratix10 remote system
> update (RSU) driver
>
> Signed-off-by: Richard Gong <[email protected]>
> Reviewed-by: Alan Tull <[email protected]>
> ---
> .../bindings/firmware/intel,stratix10-rsu.txt | 31 ++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/firmware/intel,stratix10-rsu.txt
>
> diff --git a/Documentation/devicetree/bindings/firmware/intel,stratix10-rsu.txt b/Documentation/devicetree/bindings/firmware/intel,stratix10-rsu.txt
> new file mode 100644
> index 0000000..b6250eb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/firmware/intel,stratix10-rsu.txt
> @@ -0,0 +1,31 @@
> +Intel Remote System Update Driver for Stratix10 SoC
> +============================================
> +The Intel Remote System Update (RSU) driver exposes interfaces
> +accessed through the Intel Service Layer to user space via sysfs
> +interface. The RSU interfaces report and control some of the optional
> +RSU features on Intel Stratix 10 SoC.
> +
> +The RSU feature provides a way for customers to update the boot
> +configuration of a Intel Stratix 10 SoC device with significantly reduced
> +risk of corrupting the bitstream storage and bricking the system.
> +
> +Required properties:
> +-------------------
> +The rsu node has the following mandatory properties, must be located under
> +the firmware/svc node.
> +
> +- compatible: "intel,stratix10-rsu"
> +
> +Example:
> +-------
> + firmware {
> + svc {
> + compatible = "intel,stratix10-svc";
> + method = "smc";
> + memory-region = <&service_reserved>;
> +
> + rsu: rsu {
> + compatible = "intel,stratix10-rsu";
There's no DT resources, so why does this need to be in DT. Just make
the driver for the parent instantiate the driver for this.
Rob