2019-05-07 01:29:55

by Anson Huang

[permalink] [raw]
Subject: [PATCH V4 1/3] dt-bindings: watchdog: move i.MX system controller watchdog binding to SCU

i.MX system controller watchdog depends on SCU driver to support
interrupt function, so it needs to be subnode of SCU node in DT,
binding doc should be moved to fsl,scu.txt as well.

Signed-off-by: Anson Huang <[email protected]>
---
No change.
---
.../devicetree/bindings/arm/freescale/fsl,scu.txt | 15 ++++++++++++++
.../bindings/watchdog/fsl-imx-sc-wdt.txt | 24 ----------------------
2 files changed, 15 insertions(+), 24 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt

diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index 5d7dbab..1b56557 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -133,6 +133,16 @@ RTC bindings based on SCU Message Protocol
Required properties:
- compatible: should be "fsl,imx8qxp-sc-rtc";

+Watchdog bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+Required properties:
+- compatible: should be:
+ "fsl,imx8qxp-sc-wdt"
+ followed by "fsl,imx-sc-wdt";
+Optional properties:
+- timeout-sec: contains the watchdog timeout in seconds.
+
Example (imx8qxp):
-------------
aliases {
@@ -185,6 +195,11 @@ firmware {
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
+
+ watchdog {
+ compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+ timeout-sec = <60>;
+ };
};
};

diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt
deleted file mode 100644
index 02b87e9..0000000
--- a/Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Freescale i.MX System Controller Watchdog
-
-i.MX system controller watchdog is for i.MX SoCs with system controller inside,
-the watchdog is managed by system controller, users can ONLY communicate with
-system controller from secure mode for watchdog operations, so Linux i.MX system
-controller watchdog driver will call ARM SMC API and trap into ARM-Trusted-Firmware
-for watchdog operations, ARM-Trusted-Firmware is running at secure EL3 mode and
-it will request system controller to execute the watchdog operation passed from
-Linux kernel.
-
-Required properties:
-- compatible: Should be :
- "fsl,imx8qxp-sc-wdt"
- followed by "fsl,imx-sc-wdt";
-
-Optional properties:
-- timeout-sec : Contains the watchdog timeout in seconds.
-
-Examples:
-
-watchdog {
- compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
- timeout-sec = <60>;
-};
--
2.7.4


2019-05-07 01:29:55

by Anson Huang

[permalink] [raw]
Subject: [PATCH V4 3/3] watchdog: imx_sc: Add pretimeout support

i.MX system controller watchdog can support pretimeout IRQ
via general SCU MU IRQ, it depends on IMX_SCU and driver MUST
be probed after SCU IPC ready, then enable corresponding SCU
IRQ group and register SCU IRQ notifier, when watchdog pretimeout
IRQ fires, SCU MU IRQ will be handled and watchdog pretimeout
notifier will be called to handle the event.

Signed-off-by: Anson Huang <[email protected]>
---
Changes since V3:
- use devm_add_action_or_reset instead of devm_add_action to make sure action is taken if
add action failed;
- only enable pretimeout function if everything success, including irq group enabled, irq
notifier register and add action.
---
drivers/watchdog/Kconfig | 1 +
drivers/watchdog/imx_sc_wdt.c | 116 +++++++++++++++++++++++++++++++++++-------
2 files changed, 98 insertions(+), 19 deletions(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index f457992..5453855 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -710,6 +710,7 @@ config IMX2_WDT
config IMX_SC_WDT
tristate "IMX SC Watchdog"
depends on HAVE_ARM_SMCCC
+ depends on IMX_SCU
select WATCHDOG_CORE
help
This is the driver for the system controller watchdog
diff --git a/drivers/watchdog/imx_sc_wdt.c b/drivers/watchdog/imx_sc_wdt.c
index 49848b6..6ecc03f 100644
--- a/drivers/watchdog/imx_sc_wdt.c
+++ b/drivers/watchdog/imx_sc_wdt.c
@@ -4,6 +4,7 @@
*/

#include <linux/arm-smccc.h>
+#include <linux/firmware/imx/sci.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -33,11 +34,19 @@

#define SC_TIMER_WDOG_ACTION_PARTITION 0

+#define SC_IRQ_WDOG 1
+#define SC_IRQ_GROUP_WDOG 1
+
static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0000);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");

+struct imx_sc_wdt_device {
+ struct watchdog_device wdd;
+ struct notifier_block wdt_notifier;
+};
+
static int imx_sc_wdt_ping(struct watchdog_device *wdog)
{
struct arm_smccc_res res;
@@ -85,24 +94,66 @@ static int imx_sc_wdt_set_timeout(struct watchdog_device *wdog,
return res.a0 ? -EACCES : 0;
}

+static int imx_sc_wdt_set_pretimeout(struct watchdog_device *wdog,
+ unsigned int pretimeout)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(IMX_SIP_TIMER, IMX_SIP_TIMER_SET_PRETIME_WDOG,
+ pretimeout * 1000, 0, 0, 0, 0, 0, &res);
+ if (res.a0)
+ return -EACCES;
+
+ wdog->pretimeout = pretimeout;
+
+ return 0;
+}
+
+static int imx_sc_wdt_notify(struct notifier_block *nb,
+ unsigned long event, void *group)
+{
+ struct imx_sc_wdt_device *imx_sc_wdd =
+ container_of(nb,
+ struct imx_sc_wdt_device,
+ wdt_notifier);
+
+ if (event & SC_IRQ_WDOG &&
+ *(u8 *)group == SC_IRQ_GROUP_WDOG)
+ watchdog_notify_pretimeout(&imx_sc_wdd->wdd);
+
+ return 0;
+}
+
+static void imx_sc_wdt_action(void *data)
+{
+ struct notifier_block *wdt_notifier = data;
+
+ imx_scu_irq_unregister_notifier(wdt_notifier);
+ imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
+ SC_IRQ_WDOG,
+ false);
+}
+
static const struct watchdog_ops imx_sc_wdt_ops = {
.owner = THIS_MODULE,
.start = imx_sc_wdt_start,
.stop = imx_sc_wdt_stop,
.ping = imx_sc_wdt_ping,
.set_timeout = imx_sc_wdt_set_timeout,
+ .set_pretimeout = imx_sc_wdt_set_pretimeout,
};

-static const struct watchdog_info imx_sc_wdt_info = {
+static struct watchdog_info imx_sc_wdt_info = {
.identity = "i.MX SC watchdog timer",
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
- WDIOF_MAGICCLOSE | WDIOF_PRETIMEOUT,
+ WDIOF_MAGICCLOSE,
};

static int imx_sc_wdt_probe(struct platform_device *pdev)
{
+ struct imx_sc_wdt_device *imx_sc_wdd;
+ struct watchdog_device *wdog;
struct device *dev = &pdev->dev;
- struct watchdog_device *imx_sc_wdd;
int ret;

imx_sc_wdd = devm_kzalloc(dev, sizeof(*imx_sc_wdd), GFP_KERNEL);
@@ -111,42 +162,69 @@ static int imx_sc_wdt_probe(struct platform_device *pdev)

platform_set_drvdata(pdev, imx_sc_wdd);

- imx_sc_wdd->info = &imx_sc_wdt_info;
- imx_sc_wdd->ops = &imx_sc_wdt_ops;
- imx_sc_wdd->min_timeout = 1;
- imx_sc_wdd->max_timeout = MAX_TIMEOUT;
- imx_sc_wdd->parent = dev;
- imx_sc_wdd->timeout = DEFAULT_TIMEOUT;
+ wdog = &imx_sc_wdd->wdd;
+ wdog->info = &imx_sc_wdt_info;
+ wdog->ops = &imx_sc_wdt_ops;
+ wdog->min_timeout = 1;
+ wdog->max_timeout = MAX_TIMEOUT;
+ wdog->parent = dev;
+ wdog->timeout = DEFAULT_TIMEOUT;

- watchdog_init_timeout(imx_sc_wdd, 0, dev);
- watchdog_stop_on_reboot(imx_sc_wdd);
- watchdog_stop_on_unregister(imx_sc_wdd);
+ watchdog_init_timeout(wdog, 0, dev);
+ watchdog_stop_on_reboot(wdog);
+ watchdog_stop_on_unregister(wdog);

- ret = devm_watchdog_register_device(dev, imx_sc_wdd);
+ ret = devm_watchdog_register_device(dev, wdog);
if (ret) {
dev_err(dev, "Failed to register watchdog device\n");
return ret;
}

+ ret = imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
+ SC_IRQ_WDOG,
+ true);
+ if (ret) {
+ dev_warn(dev, "Enable irq failed, pretimeout NOT supported\n");
+ return 0;
+ }
+
+ imx_sc_wdd->wdt_notifier.notifier_call = imx_sc_wdt_notify;
+ ret = imx_scu_irq_register_notifier(&imx_sc_wdd->wdt_notifier);
+ if (ret) {
+ imx_scu_irq_group_enable(SC_IRQ_GROUP_WDOG,
+ SC_IRQ_WDOG,
+ false);
+ dev_warn(dev,
+ "Register irq notifier failed, pretimeout NOT supported\n");
+ return 0;
+ }
+
+ ret = devm_add_action_or_reset(dev, imx_sc_wdt_action,
+ &imx_sc_wdd->wdt_notifier);
+ if (!ret)
+ imx_sc_wdt_info.options |= WDIOF_PRETIMEOUT;
+ else
+ dev_warn(dev, "Add action failed, pretimeout NOT supported\n");
+
return 0;
}

static int __maybe_unused imx_sc_wdt_suspend(struct device *dev)
{
- struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
+ struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);

- if (watchdog_active(imx_sc_wdd))
- imx_sc_wdt_stop(imx_sc_wdd);
+ if (watchdog_active(&imx_sc_wdd->wdd))
+ imx_sc_wdt_stop(&imx_sc_wdd->wdd);

return 0;
}

static int __maybe_unused imx_sc_wdt_resume(struct device *dev)
{
- struct watchdog_device *imx_sc_wdd = dev_get_drvdata(dev);
+ struct imx_sc_wdt_device *imx_sc_wdd = dev_get_drvdata(dev);

- if (watchdog_active(imx_sc_wdd))
- imx_sc_wdt_start(imx_sc_wdd);
+ if (watchdog_active(&imx_sc_wdd->wdd))
+ imx_sc_wdt_start(&imx_sc_wdd->wdd);

return 0;
}
--
2.7.4

2019-05-07 01:29:57

by Anson Huang

[permalink] [raw]
Subject: [PATCH V4 2/3] arm64: dts: imx8qxp: Move watchdog node into scu node

i.MX system controller watchdog has pretimeout function which
depends on i.MX SCU driver, so it should be a subnode of SCU.

Signed-off-by: Anson Huang <[email protected]>
---
No change.
---
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 0683ee2..b17c22e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -149,6 +149,11 @@
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
+
+ watchdog {
+ compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+ timeout-sec = <60>;
+ };
};

timer {
@@ -517,9 +522,4 @@
power-domains = <&pd IMX_SC_R_GPIO_7>;
};
};
-
- watchdog {
- compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
- timeout-sec = <60>;
- };
};
--
2.7.4

2019-05-13 16:45:13

by Rob Herring (Arm)

[permalink] [raw]
Subject: Re: [PATCH V4 1/3] dt-bindings: watchdog: move i.MX system controller watchdog binding to SCU

On Tue, 7 May 2019 01:28:12 +0000, Anson Huang wrote:
> i.MX system controller watchdog depends on SCU driver to support
> interrupt function, so it needs to be subnode of SCU node in DT,
> binding doc should be moved to fsl,scu.txt as well.
>
> Signed-off-by: Anson Huang <[email protected]>
> ---
> No change.
> ---
> .../devicetree/bindings/arm/freescale/fsl,scu.txt | 15 ++++++++++++++
> .../bindings/watchdog/fsl-imx-sc-wdt.txt | 24 ----------------------
> 2 files changed, 15 insertions(+), 24 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt
>

Reviewed-by: Rob Herring <[email protected]>