2019-06-11 12:24:40

by Olivier Moysan

Subject: [PATCH] ARM: dts: stm32: add sai id registers to stm32mp157c

Add identification registers to address range
of SAI DT parent node, for stm32mp157c.

Change-Id: I696363794fab59ba8d7869b3ffbc041dacdf28de
Signed-off-by: Olivier Moysan <[email protected]>
---
arch/arm/boot/dts/stm32mp157c.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index e98aad37ff9e..0c4e6ebc3529 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -746,7 +746,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4400a000 0x400>;
- reg = <0x4400a000 0x4>;
+ reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rcc SAI1_R>;
status = "disabled";
@@ -778,7 +778,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4400b000 0x400>;
- reg = <0x4400b000 0x4>;
+ reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rcc SAI2_R>;
status = "disabled";
@@ -809,7 +809,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x4400c000 0x400>;
- reg = <0x4400c000 0x4>;
+ reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rcc SAI3_R>;
status = "disabled";
@@ -1164,7 +1164,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x50027000 0x400>;
- reg = <0x50027000 0x4>;
+ reg = <0x50027000 0x4>, <0x500273f0 0x10>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rcc SAI4_R>;
status = "disabled";
--
2.7.4

2019-06-17 09:45:15

by Alexandre Torgue

Subject: Re: [PATCH] ARM: dts: stm32: add sai id registers to stm32mp157c

Hi Olivier

On 6/11/19 1:45 PM, Olivier Moysan wrote:
> Add identification registers to address range
> of SAI DT parent node, for stm32mp157c.
>
> Change-Id: I696363794fab59ba8d7869b3ffbc041dacdf28de
> Signed-off-by: Olivier Moysan <[email protected]>
> ---
> arch/arm/boot/dts/stm32mp157c.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
> index e98aad37ff9e..0c4e6ebc3529 100644
> --- a/arch/arm/boot/dts/stm32mp157c.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157c.dtsi


Applied on stm32-next. Next time, don't forget to remove your gerrit
changeID please.

Thanks.
Alex



> @@ -746,7 +746,7 @@
> #address-cells = <1>;
> #size-cells = <1>;
> ranges = <0 0x4400a000 0x400>;
> - reg = <0x4400a000 0x4>;
> + reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
> interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> resets = <&rcc SAI1_R>;
> status = "disabled";
> @@ -778,7 +778,7 @@
> #address-cells = <1>;
> #size-cells = <1>;
> ranges = <0 0x4400b000 0x400>;
> - reg = <0x4400b000 0x4>;
> + reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
> interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
> resets = <&rcc SAI2_R>;
> status = "disabled";
> @@ -809,7 +809,7 @@
> #address-cells = <1>;
> #size-cells = <1>;
> ranges = <0 0x4400c000 0x400>;
> - reg = <0x4400c000 0x4>;
> + reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
> interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> resets = <&rcc SAI3_R>;
> status = "disabled";
> @@ -1164,7 +1164,7 @@
> #address-cells = <1>;
> #size-cells = <1>;
> ranges = <0 0x50027000 0x400>;
> - reg = <0x50027000 0x4>;
> + reg = <0x50027000 0x4>, <0x500273f0 0x10>;
> interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
> resets = <&rcc SAI4_R>;
> status = "disabled";
>