This patch add support for Fintek PCIE to 2 CAN controller support
Signed-off-by: Ji-Ze Hong (Peter Hong) <[email protected]>
---
v3:
1: Fix module parameter "internal_clk" default from 1 to true.
2: Remove non-usable pcim_iounmap().
v2:
1: Fix comment on the spinlock with write access.
2: Use ARRAY_SIZE instead of F81601_PCI_MAX_CHAN.
3: Check the strap pin outside the loop.
4: Fix the cleanup issue in f81601_pci_add_card().
5: Remove unused "channels" in struct f81601_pci_card.
drivers/net/can/sja1000/Kconfig | 8 ++
drivers/net/can/sja1000/Makefile | 1 +
drivers/net/can/sja1000/f81601.c | 213 +++++++++++++++++++++++++++++++++++++++
3 files changed, 222 insertions(+)
create mode 100644 drivers/net/can/sja1000/f81601.c
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index f6dc89927ece..8588323c5138 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -101,4 +101,12 @@ config CAN_TSCAN1
IRQ numbers are read from jumpers JP4 and JP5,
SJA1000 IO base addresses are chosen heuristically (first that works).
+config CAN_F81601
+ tristate "Fintek F81601 PCIE to 2 CAN Controller"
+ depends on PCI
+ help
+ This driver adds support for Fintek F81601 PCIE to 2 CAN Controller.
+ It had internal 24MHz clock source, but it can be changed by
+ manufacturer. We can use modinfo to get usage for parameters.
+ Visit http://www.fintek.com.tw to get more information.
endif
diff --git a/drivers/net/can/sja1000/Makefile b/drivers/net/can/sja1000/Makefile
index 9253aaf9e739..6f6268543bd9 100644
--- a/drivers/net/can/sja1000/Makefile
+++ b/drivers/net/can/sja1000/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_CAN_PEAK_PCMCIA) += peak_pcmcia.o
obj-$(CONFIG_CAN_PEAK_PCI) += peak_pci.o
obj-$(CONFIG_CAN_PLX_PCI) += plx_pci.o
obj-$(CONFIG_CAN_TSCAN1) += tscan1.o
+obj-$(CONFIG_CAN_F81601) += f81601.o
diff --git a/drivers/net/can/sja1000/f81601.c b/drivers/net/can/sja1000/f81601.c
new file mode 100644
index 000000000000..3d0436efead9
--- /dev/null
+++ b/drivers/net/can/sja1000/f81601.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Fintek F81601 PCIE to 2 CAN controller driver
+ *
+ * Copyright (C) 2019 Peter Hong <[email protected]>
+ * Copyright (C) 2019 Linux Foundation
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/can/dev.h>
+#include <linux/io.h>
+#include <linux/version.h>
+
+#include "sja1000.h"
+
+#define F81601_PCI_MAX_CHAN 2
+
+#define F81601_DECODE_REG 0x209
+#define F81601_IO_MODE BIT(7)
+#define F81601_MEM_MODE BIT(6)
+#define F81601_CFG_MODE BIT(5)
+#define F81601_CAN2_INTERNAL_CLK BIT(3)
+#define F81601_CAN1_INTERNAL_CLK BIT(2)
+#define F81601_CAN2_EN BIT(1)
+#define F81601_CAN1_EN BIT(0)
+
+#define F81601_TRAP_REG 0x20a
+#define F81601_CAN2_HAS_EN BIT(4)
+
+struct f81601_pci_card {
+ void __iomem *addr;
+ spinlock_t lock; /* use this spin lock only for write access */
+ struct pci_dev *dev;
+ struct net_device *net_dev[F81601_PCI_MAX_CHAN];
+};
+
+static const struct pci_device_id f81601_pci_tbl[] = {
+ { PCI_DEVICE(0x1c29, 0x1703) },
+ {},
+};
+
+MODULE_DEVICE_TABLE(pci, f81601_pci_tbl);
+
+static bool internal_clk = true;
+module_param(internal_clk, bool, 0444);
+MODULE_PARM_DESC(internal_clk, "Use internal clock, default true (24MHz)");
+
+static unsigned int external_clk;
+module_param(external_clk, uint, 0444);
+MODULE_PARM_DESC(external_clk, "External clock when internal_clk disabled");
+
+static u8 f81601_pci_read_reg(const struct sja1000_priv *priv, int port)
+{
+ return readb(priv->reg_base + port);
+}
+
+static void f81601_pci_write_reg(const struct sja1000_priv *priv, int port,
+ u8 val)
+{
+ struct f81601_pci_card *card = priv->priv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+ writeb(val, priv->reg_base + port);
+ readb(priv->reg_base);
+ spin_unlock_irqrestore(&card->lock, flags);
+}
+
+static void f81601_pci_del_card(struct pci_dev *pdev)
+{
+ struct f81601_pci_card *card = pci_get_drvdata(pdev);
+ struct net_device *dev;
+ int i = 0;
+
+ for (i = 0; i < ARRAY_SIZE(card->net_dev); i++) {
+ dev = card->net_dev[i];
+ if (!dev)
+ continue;
+
+ dev_info(&pdev->dev, "%s: Removing %s\n", __func__, dev->name);
+
+ unregister_sja1000dev(dev);
+ free_sja1000dev(dev);
+ }
+}
+
+/* Probe F81601 based device for the SJA1000 chips and register each
+ * available CAN channel to SJA1000 Socket-CAN subsystem.
+ */
+static int f81601_pci_add_card(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct sja1000_priv *priv;
+ struct net_device *dev;
+ struct f81601_pci_card *card;
+ int err, i, count;
+ u8 tmp;
+
+ if (pcim_enable_device(pdev) < 0) {
+ dev_err(&pdev->dev, "Failed to enable PCI device\n");
+ return -ENODEV;
+ }
+
+ dev_info(&pdev->dev, "Detected card at slot #%i\n",
+ PCI_SLOT(pdev->devfn));
+
+ card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL);
+ if (!card)
+ return -ENOMEM;
+
+ card->dev = pdev;
+ spin_lock_init(&card->lock);
+
+ pci_set_drvdata(pdev, card);
+
+ tmp = F81601_IO_MODE | F81601_MEM_MODE | F81601_CFG_MODE |
+ F81601_CAN2_EN | F81601_CAN1_EN;
+
+ if (internal_clk) {
+ tmp |= F81601_CAN2_INTERNAL_CLK | F81601_CAN1_INTERNAL_CLK;
+
+ dev_info(&pdev->dev,
+ "F81601 running with internal clock: 24Mhz\n");
+ } else {
+ dev_info(&pdev->dev,
+ "F81601 running with external clock: %dMhz\n",
+ external_clk / 1000000);
+ }
+
+ pci_write_config_byte(pdev, F81601_DECODE_REG, tmp);
+
+ card->addr = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
+
+ if (!card->addr) {
+ err = -ENOMEM;
+ dev_err(&pdev->dev, "%s: Failed to remap BAR\n", __func__);
+ goto failure_cleanup;
+ }
+
+ /* read CAN2_HW_EN strap pin to detect how many CANBUS do we have */
+ count = ARRAY_SIZE(card->net_dev);
+ pci_read_config_byte(pdev, F81601_TRAP_REG, &tmp);
+ if (!(tmp & F81601_CAN2_HAS_EN))
+ count = 1;
+
+ /* Detect available channels */
+ for (i = 0; i < count; i++) {
+ dev = alloc_sja1000dev(0);
+ if (!dev) {
+ err = -ENOMEM;
+ goto failure_cleanup;
+ }
+
+ priv = netdev_priv(dev);
+ priv->priv = card;
+ priv->irq_flags = IRQF_SHARED;
+ priv->reg_base = card->addr + 0x80 * i;
+ priv->read_reg = f81601_pci_read_reg;
+ priv->write_reg = f81601_pci_write_reg;
+
+ if (internal_clk)
+ priv->can.clock.freq = 24000000 / 2;
+ else
+ priv->can.clock.freq = external_clk / 2;
+
+ priv->ocr = OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL;
+ priv->cdr = CDR_CBP;
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ dev->dev_id = i;
+ dev->irq = pdev->irq;
+
+ /* Register SJA1000 device */
+ err = register_sja1000dev(dev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "%s: Registering device failed: %x\n", __func__,
+ err);
+ free_sja1000dev(dev);
+ goto failure_cleanup;
+ }
+
+ card->net_dev[i] = dev;
+ dev_info(&pdev->dev, "Channel #%d, %s at 0x%p, irq %d\n", i,
+ dev->name, priv->reg_base, dev->irq);
+ }
+
+ return 0;
+
+failure_cleanup:
+ dev_err(&pdev->dev, "%s: failed: %d. Cleaning Up.\n", __func__, err);
+ f81601_pci_del_card(pdev);
+
+ return err;
+}
+
+static struct pci_driver f81601_pci_driver = {
+ .name = "f81601",
+ .id_table = f81601_pci_tbl,
+ .probe = f81601_pci_add_card,
+ .remove = f81601_pci_del_card,
+};
+
+MODULE_DESCRIPTION("Fintek F81601 PCIE to 2 CANBUS adaptor driver");
+MODULE_AUTHOR("Peter Hong <[email protected]>");
+MODULE_LICENSE("GPL v2");
+
+module_pci_driver(f81601_pci_driver);
--
2.7.4