From: Enrico Weigelt <[email protected]>
The APU3+ boards have two SIM sockets, while only one of them
can be routed to the mpcie slots at a time. Selection is done
via simswap gpio.
We currently don't have a fitting subsystem for those cases yet,
so just wire it up to a LED for the time being. While this isn't
really semantically correct, it's a good compromise.
Signed-off-by: Enrico Weigelt <[email protected]>
---
drivers/platform/x86/pcengines-apuv2.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/pcengines-apuv2.c b/drivers/platform/x86/pcengines-apuv2.c
index b0d3110..adecd6a 100644
--- a/drivers/platform/x86/pcengines-apuv2.c
+++ b/drivers/platform/x86/pcengines-apuv2.c
@@ -69,7 +69,8 @@
static const struct gpio_led apu2_leds[] = {
{ .name = "apu:green:1" },
{ .name = "apu:green:2" },
- { .name = "apu:green:3" }
+ { .name = "apu:green:3" },
+ { .name = "apu:simswap" },
};
static const struct gpio_led_platform_data apu2_leds_pdata = {
@@ -86,6 +87,8 @@
NULL, 1, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_LINE_LED3,
NULL, 2, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_REG_SIMSWAP,
+ NULL, 3, GPIO_ACTIVE_LOW),
}
};
--
1.9.1
On Mon, Jul 29, 2019 at 5:39 PM Enrico Weigelt, metux IT consult
<[email protected]> wrote:
>
> From: Enrico Weigelt <[email protected]>
>
> The APU3+ boards have two SIM sockets, while only one of them
> can be routed to the mpcie slots at a time. Selection is done
> via simswap gpio.
>
> We currently don't have a fitting subsystem for those cases yet,
> so just wire it up to a LED for the time being. While this isn't
> really semantically correct, it's a good compromise.
>
Applied, thanks!
> Signed-off-by: Enrico Weigelt <[email protected]>
> ---
> drivers/platform/x86/pcengines-apuv2.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/platform/x86/pcengines-apuv2.c b/drivers/platform/x86/pcengines-apuv2.c
> index b0d3110..adecd6a 100644
> --- a/drivers/platform/x86/pcengines-apuv2.c
> +++ b/drivers/platform/x86/pcengines-apuv2.c
> @@ -69,7 +69,8 @@
> static const struct gpio_led apu2_leds[] = {
> { .name = "apu:green:1" },
> { .name = "apu:green:2" },
> - { .name = "apu:green:3" }
> + { .name = "apu:green:3" },
> + { .name = "apu:simswap" },
> };
>
> static const struct gpio_led_platform_data apu2_leds_pdata = {
> @@ -86,6 +87,8 @@
> NULL, 1, GPIO_ACTIVE_LOW),
> GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_LINE_LED3,
> NULL, 2, GPIO_ACTIVE_LOW),
> + GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_REG_SIMSWAP,
> + NULL, 3, GPIO_ACTIVE_LOW),
> }
> };
>
> --
> 1.9.1
>
--
With Best Regards,
Andy Shevchenko