When using the reserved memory node in the device tree there are
two options - dynamic or static. If a dynamic allocation was
selected (where the kernel selects the address for the allocation)
convert it to a static allocation by inserting the reg property.
This will ensure the same memory is reused after a kexec()
Signed-off-by: Roy Pledge <[email protected]>
---
drivers/soc/fsl/qbman/dpaa_sys.c | 60 ++++++++++++++++++++++++----------------
1 file changed, 36 insertions(+), 24 deletions(-)
diff --git a/drivers/soc/fsl/qbman/dpaa_sys.c b/drivers/soc/fsl/qbman/dpaa_sys.c
index 3e0a7f3..9dd8bb5 100644
--- a/drivers/soc/fsl/qbman/dpaa_sys.c
+++ b/drivers/soc/fsl/qbman/dpaa_sys.c
@@ -37,41 +37,53 @@
int qbman_init_private_mem(struct device *dev, int idx, dma_addr_t *addr,
size_t *size)
{
- int ret;
struct device_node *mem_node;
- u64 size64;
struct reserved_mem *rmem;
+ struct property *prop;
+ int len, err;
+ __be32 *res_array;
- ret = of_reserved_mem_device_init_by_idx(dev, dev->of_node, idx);
- if (ret) {
- dev_err(dev,
- "of_reserved_mem_device_init_by_idx(%d) failed 0x%x\n",
- idx, ret);
- return -ENODEV;
- }
- mem_node = of_parse_phandle(dev->of_node, "memory-region", 0);
- if (mem_node) {
- ret = of_property_read_u64(mem_node, "size", &size64);
- if (ret) {
- dev_err(dev, "of_address_to_resource fails 0x%x\n",
- ret);
- return -ENODEV;
- }
- *size = size64;
- } else {
+ mem_node = of_parse_phandle(dev->of_node, "memory-region", idx);
+ if (!mem_node) {
dev_err(dev, "No memory-region found for index %d\n", idx);
return -ENODEV;
}
rmem = of_reserved_mem_lookup(mem_node);
+ if (!rmem) {
+ dev_err(dev, "of_reserved_mem_lookup() returned NULL\n");
+ return -ENODEV;
+ }
*addr = rmem->base;
+ *size = rmem->size;
/*
- * Disassociate the reserved memory area from the device
- * because a device can only have one DMA memory area. This
- * should be fine since the memory is allocated and initialized
- * and only ever accessed by the QBMan device from now on
+ * Check if the reg property exists - if not insert the node
+ * so upon kexec() the same memory region address will be preserved.
+ * This is needed because QBMan HW does not allow the base address/
+ * size to be modified once set.
*/
- of_reserved_mem_device_release(dev);
+ prop = of_find_property(mem_node, "reg", &len);
+ if (!prop) {
+ prop = devm_kzalloc(dev, sizeof(*prop), GFP_KERNEL);
+ if (!prop)
+ return -ENOMEM;
+ prop->value = res_array = devm_kzalloc(dev, sizeof(__be32) * 4,
+ GFP_KERNEL);
+ if (!prop->value)
+ return -ENOMEM;
+ res_array[0] = cpu_to_be32(upper_32_bits(*addr));
+ res_array[1] = cpu_to_be32(lower_32_bits(*addr));
+ res_array[2] = cpu_to_be32(upper_32_bits(*size));
+ res_array[3] = cpu_to_be32(lower_32_bits(*size));
+ prop->length = sizeof(__be32) * 4;
+ prop->name = devm_kstrdup(dev, "reg", GFP_KERNEL);
+ if (!prop->name)
+ return -ENOMEM;
+ err = of_add_property(mem_node, prop);
+ if (err)
+ return err;
+ }
+
return 0;
}
--
2.7.4