According to ACT8945A datasheet[1], operating modes for ldos are
controlled by BIT(5) of their respective _CTRL registers.
[1] https://active-semi.com/wp-content/uploads/ACT8945A_Datasheet.pdf
Fixes: 7482d6ecc68e ("regulator: act8945a-regulator: Implement PM functionalities")
Signed-off-by: Raag Jadav <[email protected]>
---
drivers/regulator/act8945a-regulator.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c
index 5842849..d2f804d 100644
--- a/drivers/regulator/act8945a-regulator.c
+++ b/drivers/regulator/act8945a-regulator.c
@@ -169,16 +169,16 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
reg = ACT8945A_DCDC3_CTRL;
break;
case ACT8945A_ID_LDO1:
- reg = ACT8945A_LDO1_SUS;
+ reg = ACT8945A_LDO1_CTRL;
break;
case ACT8945A_ID_LDO2:
- reg = ACT8945A_LDO2_SUS;
+ reg = ACT8945A_LDO2_CTRL;
break;
case ACT8945A_ID_LDO3:
- reg = ACT8945A_LDO3_SUS;
+ reg = ACT8945A_LDO3_CTRL;
break;
case ACT8945A_ID_LDO4:
- reg = ACT8945A_LDO4_SUS;
+ reg = ACT8945A_LDO4_CTRL;
break;
default:
return -EINVAL;
--
2.7.4
The patch
regulator: act8945a-regulator: fix ldo register addresses in set_mode hook
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 5d2fc542e8c92130b55ddeb81876ec398adf4d13 Mon Sep 17 00:00:00 2001
From: Raag Jadav <[email protected]>
Date: Tue, 13 Aug 2019 00:09:54 +0530
Subject: [PATCH] regulator: act8945a-regulator: fix ldo register addresses in
set_mode hook
According to ACT8945A datasheet[1], operating modes for ldos are
controlled by BIT(5) of their respective _CTRL registers.
[1] https://active-semi.com/wp-content/uploads/ACT8945A_Datasheet.pdf
Fixes: 7482d6ecc68e ("regulator: act8945a-regulator: Implement PM functionalities")
Signed-off-by: Raag Jadav <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
---
drivers/regulator/act8945a-regulator.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c
index 584284938ac9..d2f804dbc785 100644
--- a/drivers/regulator/act8945a-regulator.c
+++ b/drivers/regulator/act8945a-regulator.c
@@ -169,16 +169,16 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
reg = ACT8945A_DCDC3_CTRL;
break;
case ACT8945A_ID_LDO1:
- reg = ACT8945A_LDO1_SUS;
+ reg = ACT8945A_LDO1_CTRL;
break;
case ACT8945A_ID_LDO2:
- reg = ACT8945A_LDO2_SUS;
+ reg = ACT8945A_LDO2_CTRL;
break;
case ACT8945A_ID_LDO3:
- reg = ACT8945A_LDO3_SUS;
+ reg = ACT8945A_LDO3_CTRL;
break;
case ACT8945A_ID_LDO4:
- reg = ACT8945A_LDO4_SUS;
+ reg = ACT8945A_LDO4_CTRL;
break;
default:
return -EINVAL;
--
2.20.1