PowerNV secure variables, which store the keys used for OS kernel
verification, are managed by the firmware. These secure variables need to
be accessed by the userspace for addition/deletion of the certificates.
This patch adds the sysfs interface to expose secure variables for PowerNV
secureboot. The users shall use this interface for manipulating
the keys stored in the secure variables.
Signed-off-by: Nayna Jain <[email protected]>
---
Documentation/ABI/testing/sysfs-secvar | 27 ++++
arch/powerpc/Kconfig | 9 ++
arch/powerpc/kernel/Makefile | 1 +
arch/powerpc/kernel/secvar-sysfs.c | 210 +++++++++++++++++++++++++
4 files changed, 247 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-secvar
create mode 100644 arch/powerpc/kernel/secvar-sysfs.c
diff --git a/Documentation/ABI/testing/sysfs-secvar b/Documentation/ABI/testing/sysfs-secvar
new file mode 100644
index 000000000000..68f0e03d873d
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-secvar
@@ -0,0 +1,27 @@
+What: /sys/firmware/secvar
+Date: August 2019
+Contact: Nayna Jain <[email protected]>
+Description:
+ This directory exposes interfaces for interacting with
+ the secure variables managed by OPAL firmware.
+
+ This is only for the powerpc/powernv platform.
+
+ Directory:
+ vars: This directory lists all the variables that
+ are supported by the OPAL. The variables are
+ represented in the form of directories with
+ their variable names. The variable name is
+ unique and is in ASCII representation. The data
+ and size can be determined by reading their
+ respective attribute files.
+
+ Each variable directory has the following files:
+ name: An ASCII representation of the variable name
+ data: A read-only file containing the value of the
+ variable
+ size: An integer representation of the size of the
+ content of the variable. In other works, it
+ represents the size of the data
+ update: A write-only file that is used to submit the new
+ value for the variable.
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 42109682b727..b4bdf77837b2 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -925,6 +925,15 @@ config PPC_SECURE_BOOT
allows user to enable OS Secure Boot on PowerPC systems that
have firmware secure boot support.
+config SECVAR_SYSFS
+ tristate "Enable sysfs interface for POWER secure variables"
+ depends on PPC_SECURE_BOOT
+ help
+ POWER secure variables are managed and controlled by firmware.
+ These variables are exposed to userspace via sysfs to enable
+ read/write operations on these variables. Say Y if you have
+ secure boot enabled and want to expose variables to userspace.
+
endmenu
config ISA_DMA_API
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 9041563f1c74..4ea7b738c3a3 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -158,6 +158,7 @@ obj-$(CONFIG_EPAPR_PARAVIRT) += epapr_paravirt.o epapr_hcalls.o
obj-$(CONFIG_KVM_GUEST) += kvm.o kvm_emul.o
obj-$(CONFIG_PPC_SECURE_BOOT) += secboot.o ima_arch.o secvar-ops.o
+obj-$(CONFIG_SECVAR_SYSFS) += secvar-sysfs.o
# Disable GCOV, KCOV & sanitizers in odd or sensitive code
GCOV_PROFILE_prom_init.o := n
diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
new file mode 100644
index 000000000000..e46986bb29a0
--- /dev/null
+++ b/arch/powerpc/kernel/secvar-sysfs.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 IBM Corporation <[email protected]>
+ *
+ * This code exposes secure variables to user via sysfs
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/compat.h>
+#include <linux/string.h>
+#include <asm/opal.h>
+#include <asm/secvar.h>
+
+//Approximating it for now, it is bound to change.
+#define VARIABLE_MAX_SIZE 32000
+
+static struct kobject *powerpc_kobj;
+static struct secvar_operations *secvarops;
+struct kset *secvar_kset;
+
+static ssize_t name_show(struct kobject *kobj, struct kobj_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%s", kobj->name);
+}
+
+static ssize_t size_show(struct kobject *kobj, struct kobj_attribute *attr,
+ char *buf)
+{
+ unsigned long dsize;
+ int rc;
+
+ rc = secvarops->get_variable(kobj->name, strlen(kobj->name) + 1, NULL,
+ &dsize);
+ if (rc) {
+ pr_err("Error retrieving variable size %d\n", rc);
+ return rc;
+ }
+
+ rc = sprintf(buf, "%ld", dsize);
+
+ return rc;
+}
+
+static ssize_t data_read(struct file *filep, struct kobject *kobj,
+ struct bin_attribute *attr, char *buf, loff_t off,
+ size_t count)
+{
+ unsigned long dsize;
+ int rc;
+ char *data;
+
+ rc = secvarops->get_variable(kobj->name, strlen(kobj->name) + 1, NULL,
+ &dsize);
+ if (rc) {
+ pr_err("Error getting variable size %d\n", rc);
+ return rc;
+ }
+ pr_debug("dsize is %ld\n", dsize);
+
+ data = kzalloc(dsize, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ rc = secvarops->get_variable(kobj->name, strlen(kobj->name)+1, data,
+ &dsize);
+ if (rc) {
+ pr_err("Error getting variable %d\n", rc);
+ goto data_fail;
+ }
+
+ rc = memory_read_from_buffer(buf, count, &off, data, dsize);
+
+data_fail:
+ kfree(data);
+ return rc;
+}
+
+static ssize_t update_write(struct file *filep, struct kobject *kobj,
+ struct bin_attribute *attr, char *buf, loff_t off,
+ size_t count)
+{
+ int rc;
+
+ pr_debug("count is %ld\n", count);
+ rc = secvarops->set_variable(kobj->name, strlen(kobj->name)+1, buf,
+ count);
+ if (rc) {
+ pr_err("Error setting the variable %s\n", kobj->name);
+ return rc;
+ }
+
+ return count;
+}
+
+static struct kobj_attribute name_attr =
+__ATTR(name, 0444, name_show, NULL);
+
+static struct kobj_attribute size_attr =
+__ATTR(size, 0444, size_show, NULL);
+
+static struct bin_attribute data_attr = {
+ .attr = {.name = "data", .mode = 0444},
+ .size = VARIABLE_MAX_SIZE,
+ .read = data_read,
+};
+
+
+static struct bin_attribute update_attr = {
+ .attr = {.name = "update", .mode = 0200},
+ .size = VARIABLE_MAX_SIZE,
+ .write = update_write,
+};
+
+static struct bin_attribute *secvar_bin_attrs[] = {
+ &data_attr,
+ &update_attr,
+ NULL,
+};
+
+static struct attribute *secvar_attrs[] = {
+ &name_attr.attr,
+ &size_attr.attr,
+ NULL,
+};
+
+const struct attribute_group secvar_attr_group = {
+ .attrs = secvar_attrs,
+ .bin_attrs = secvar_bin_attrs,
+};
+
+int secvar_sysfs_load(void)
+{
+
+ char *name;
+ unsigned long namesize;
+ struct kobject *kobj;
+ int status;
+ int rc = 0;
+
+ name = kzalloc(1024, GFP_KERNEL);
+ if (!name)
+ return -ENOMEM;
+
+ do {
+
+ status = secvarops->get_next_variable(name, &namesize, 1024);
+ if (status != OPAL_SUCCESS)
+ break;
+
+ pr_info("name is %s\n", name);
+ kobj = kobject_create_and_add(name, &(secvar_kset->kobj));
+ if (kobj) {
+ rc = sysfs_create_group(kobj, &secvar_attr_group);
+ if (rc)
+ pr_err("Error creating attributes for %s variable\n",
+ name);
+ } else {
+ pr_err("Error creating sysfs entry for %s variable\n",
+ name);
+ rc = -EINVAL;
+ }
+
+ } while ((status == OPAL_SUCCESS) && (rc == 0));
+
+ kfree(name);
+ return rc;
+}
+
+int secvar_sysfs_init(void)
+{
+ powerpc_kobj = kobject_create_and_add("secvar", firmware_kobj);
+ if (!powerpc_kobj) {
+ pr_err("secvar: Failed to create firmware kobj\n");
+ return -ENODEV;
+ }
+
+ secvar_kset = kset_create_and_add("vars", NULL, powerpc_kobj);
+ if (!secvar_kset) {
+ pr_err("secvar: sysfs kobject registration failed.\n");
+ return -ENODEV;
+ }
+
+ secvarops = get_secvar_ops();
+ if (!secvarops) {
+ kobject_put(powerpc_kobj);
+ pr_err("secvar: failed to retrieve secvar operations.\n");
+ return -ENODEV;
+ }
+
+ secvar_sysfs_load();
+ pr_info("Secure variables sysfs initialized");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(secvar_sysfs_init);
+
+static void secvar_sysfs_exit(void)
+{
+ kobject_put(powerpc_kobj);
+}
+EXPORT_SYMBOL_GPL(secvar_sysfs_exit);
+
+module_init(secvar_sysfs_init);
+module_exit(secvar_sysfs_exit);
+
+MODULE_AUTHOR("Nayna Jain<[email protected]>");
+MODULE_DESCRIPTION("sysfs interface to POWER secure variables");
+MODULE_LICENSE("GPL");
--
2.20.1
On Wed, Aug 21, 2019 at 11:08:21AM -0400, Nayna Jain wrote:
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-secvar
> @@ -0,0 +1,27 @@
> +What: /sys/firmware/secvar
> +Date: August 2019
> +Contact: Nayna Jain <[email protected]>
> +Description:
> + This directory exposes interfaces for interacting with
> + the secure variables managed by OPAL firmware.
> +
> + This is only for the powerpc/powernv platform.
> +
> + Directory:
> + vars: This directory lists all the variables that
> + are supported by the OPAL. The variables are
> + represented in the form of directories with
> + their variable names. The variable name is
> + unique and is in ASCII representation. The data
> + and size can be determined by reading their
> + respective attribute files.
> +
> + Each variable directory has the following files:
> + name: An ASCII representation of the variable name
> + data: A read-only file containing the value of the
> + variable
> + size: An integer representation of the size of the
> + content of the variable. In other works, it
> + represents the size of the data
> + update: A write-only file that is used to submit the new
> + value for the variable.
Can you break this out into one-entry-per-file like most other entries
are defined? That makes it easier for tools to parse (specifically the
tool in the tree right now...)
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 42109682b727..b4bdf77837b2 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -925,6 +925,15 @@ config PPC_SECURE_BOOT
> allows user to enable OS Secure Boot on PowerPC systems that
> have firmware secure boot support.
>
> +config SECVAR_SYSFS
> + tristate "Enable sysfs interface for POWER secure variables"
> + depends on PPC_SECURE_BOOT
No depends on SYSFS?
> + help
> + POWER secure variables are managed and controlled by firmware.
> + These variables are exposed to userspace via sysfs to enable
> + read/write operations on these variables. Say Y if you have
> + secure boot enabled and want to expose variables to userspace.
Mix of tabs and spaces :(
> +
> endmenu
>
> config ISA_DMA_API
> diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
> index 9041563f1c74..4ea7b738c3a3 100644
> --- a/arch/powerpc/kernel/Makefile
> +++ b/arch/powerpc/kernel/Makefile
> @@ -158,6 +158,7 @@ obj-$(CONFIG_EPAPR_PARAVIRT) += epapr_paravirt.o epapr_hcalls.o
> obj-$(CONFIG_KVM_GUEST) += kvm.o kvm_emul.o
>
> obj-$(CONFIG_PPC_SECURE_BOOT) += secboot.o ima_arch.o secvar-ops.o
> +obj-$(CONFIG_SECVAR_SYSFS) += secvar-sysfs.o
No tab?
>
> # Disable GCOV, KCOV & sanitizers in odd or sensitive code
> GCOV_PROFILE_prom_init.o := n
> diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
> new file mode 100644
> index 000000000000..e46986bb29a0
> --- /dev/null
> +++ b/arch/powerpc/kernel/secvar-sysfs.c
> @@ -0,0 +1,210 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 IBM Corporation <[email protected]>
> + *
> + * This code exposes secure variables to user via sysfs
> + */
> +
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/compat.h>
> +#include <linux/string.h>
> +#include <asm/opal.h>
> +#include <asm/secvar.h>
> +
> +//Approximating it for now, it is bound to change.
" " before "A" here please.
> +#define VARIABLE_MAX_SIZE 32000
> +
> +static struct kobject *powerpc_kobj;
> +static struct secvar_operations *secvarops;
> +struct kset *secvar_kset;
> +
> +static ssize_t name_show(struct kobject *kobj, struct kobj_attribute *attr,
> + char *buf)
> +{
> + return sprintf(buf, "%s", kobj->name);
> +}
Why do you need this entry as it is the directory name? Userspace
already "knows" it if they can open this file.
> +
> +static ssize_t size_show(struct kobject *kobj, struct kobj_attribute *attr,
> + char *buf)
> +{
> + unsigned long dsize;
> + int rc;
> +
> + rc = secvarops->get_variable(kobj->name, strlen(kobj->name) + 1, NULL,
> + &dsize);
> + if (rc) {
> + pr_err("Error retrieving variable size %d\n", rc);
> + return rc;
> + }
> +
> + rc = sprintf(buf, "%ld", dsize);
> +
> + return rc;
> +}
> +
> +static ssize_t data_read(struct file *filep, struct kobject *kobj,
> + struct bin_attribute *attr, char *buf, loff_t off,
> + size_t count)
> +{
> + unsigned long dsize;
> + int rc;
> + char *data;
> +
> + rc = secvarops->get_variable(kobj->name, strlen(kobj->name) + 1, NULL,
> + &dsize);
> + if (rc) {
> + pr_err("Error getting variable size %d\n", rc);
> + return rc;
> + }
> + pr_debug("dsize is %ld\n", dsize);
> +
> + data = kzalloc(dsize, GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + rc = secvarops->get_variable(kobj->name, strlen(kobj->name)+1, data,
> + &dsize);
> + if (rc) {
> + pr_err("Error getting variable %d\n", rc);
> + goto data_fail;
> + }
> +
> + rc = memory_read_from_buffer(buf, count, &off, data, dsize);
> +
> +data_fail:
> + kfree(data);
> + return rc;
> +}
> +
> +static ssize_t update_write(struct file *filep, struct kobject *kobj,
> + struct bin_attribute *attr, char *buf, loff_t off,
> + size_t count)
> +{
> + int rc;
> +
> + pr_debug("count is %ld\n", count);
> + rc = secvarops->set_variable(kobj->name, strlen(kobj->name)+1, buf,
> + count);
> + if (rc) {
> + pr_err("Error setting the variable %s\n", kobj->name);
> + return rc;
> + }
> +
> + return count;
> +}
> +
> +static struct kobj_attribute name_attr =
> +__ATTR(name, 0444, name_show, NULL);
__ATTR_RO()?
> +
> +static struct kobj_attribute size_attr =
> +__ATTR(size, 0444, size_show, NULL);
__ATTR_RO()?
> +
> +static struct bin_attribute data_attr = {
> + .attr = {.name = "data", .mode = 0444},
> + .size = VARIABLE_MAX_SIZE,
> + .read = data_read,
> +};
__BIN_ATTR_RO()?
> +
> +
> +static struct bin_attribute update_attr = {
> + .attr = {.name = "update", .mode = 0200},
> + .size = VARIABLE_MAX_SIZE,
> + .write = update_write,
> +};
__BIN_ATTR_RO()?
> +
> +static struct bin_attribute *secvar_bin_attrs[] = {
> + &data_attr,
> + &update_attr,
> + NULL,
> +};
> +
> +static struct attribute *secvar_attrs[] = {
> + &name_attr.attr,
> + &size_attr.attr,
> + NULL,
> +};
> +
> +const struct attribute_group secvar_attr_group = {
> + .attrs = secvar_attrs,
> + .bin_attrs = secvar_bin_attrs,
> +};
static?
> +
> +int secvar_sysfs_load(void)
> +{
> +
> + char *name;
No blank line. You didn't run this this through checkpatch, did you :(
> + unsigned long namesize;
> + struct kobject *kobj;
> + int status;
> + int rc = 0;
> +
> + name = kzalloc(1024, GFP_KERNEL);
Why 1024?
> + if (!name)
> + return -ENOMEM;
> +
> + do {
> +
> + status = secvarops->get_next_variable(name, &namesize, 1024);
> + if (status != OPAL_SUCCESS)
> + break;
> +
> + pr_info("name is %s\n", name);
Please delete debugging messages.
> + kobj = kobject_create_and_add(name, &(secvar_kset->kobj));
> + if (kobj) {
> + rc = sysfs_create_group(kobj, &secvar_attr_group);
You just raced userspace and lost :(
If you set your kobj_type to have the attribute group you will not race
and loose, the core will handle it for you.
> + if (rc)
> + pr_err("Error creating attributes for %s variable\n",
> + name);
> + } else {
> + pr_err("Error creating sysfs entry for %s variable\n",
> + name);
> + rc = -EINVAL;
> + }
> +
> + } while ((status == OPAL_SUCCESS) && (rc == 0));
> +
> + kfree(name);
> + return rc;
> +}
> +
> +int secvar_sysfs_init(void)
> +{
> + powerpc_kobj = kobject_create_and_add("secvar", firmware_kobj);
> + if (!powerpc_kobj) {
> + pr_err("secvar: Failed to create firmware kobj\n");
> + return -ENODEV;
> + }
> +
> + secvar_kset = kset_create_and_add("vars", NULL, powerpc_kobj);
> + if (!secvar_kset) {
> + pr_err("secvar: sysfs kobject registration failed.\n");
You juat leaked a kobject :(
> + return -ENODEV;
> + }
> +
> + secvarops = get_secvar_ops();
> + if (!secvarops) {
> + kobject_put(powerpc_kobj);
> + pr_err("secvar: failed to retrieve secvar operations.\n");
> + return -ENODEV;
You just leaked 2 things from above :(
> + }
> +
> + secvar_sysfs_load();
> + pr_info("Secure variables sysfs initialized");
Do not be noisy when all goes just fine. The kernel log should be quiet
when all goes well.
thanks,
greg k-h
On Wed, 2019-08-21 at 11:08 -0400, Nayna Jain wrote:
> PowerNV secure variables, which store the keys used for OS kernel
> verification, are managed by the firmware. These secure variables need to
> be accessed by the userspace for addition/deletion of the certificates.
>
> This patch adds the sysfs interface to expose secure variables for PowerNV
> secureboot. The users shall use this interface for manipulating
> the keys stored in the secure variables.
>
> Signed-off-by: Nayna Jain <[email protected]>
> ---
> Documentation/ABI/testing/sysfs-secvar | 27 ++++
> arch/powerpc/Kconfig | 9 ++
> arch/powerpc/kernel/Makefile | 1 +
> arch/powerpc/kernel/secvar-sysfs.c | 210 +++++++++++++++++++++++++
> 4 files changed, 247 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-secvar
> create mode 100644 arch/powerpc/kernel/secvar-sysfs.c
>
> diff --git a/Documentation/ABI/testing/sysfs-secvar b/Documentation/ABI/testing/sysfs-secvar
> new file mode 100644
> index 000000000000..68f0e03d873d
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-secvar
> @@ -0,0 +1,27 @@
> +What: /sys/firmware/secvar
> +Date: August 2019
> +Contact: Nayna Jain <[email protected]>
> +Description:
> + This directory exposes interfaces for interacting with
> + the secure variables managed by OPAL firmware.
> +
> + This is only for the powerpc/powernv platform.
> +
> + Directory:
> + vars: This directory lists all the variables that
> + are supported by the OPAL. The variables are
> + represented in the form of directories with
> + their variable names. The variable name is
> + unique and is in ASCII representation. The data
> + and size can be determined by reading their
> + respective attribute files.
> +
> + Each variable directory has the following files:
> + name: An ASCII representation of the variable name
> + data: A read-only file containing the value of the
> + variable
> + size: An integer representation of the size of the
> + content of the variable. In other works, it
> + represents the size of the data
> + update: A write-only file that is used to submit the new
> + value for the variable.
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 42109682b727..b4bdf77837b2 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -925,6 +925,15 @@ config PPC_SECURE_BOOT
> allows user to enable OS Secure Boot on PowerPC systems that
> have firmware secure boot support.
>
> +config SECVAR_SYSFS
> + tristate "Enable sysfs interface for POWER secure variables"
> + depends on PPC_SECURE_BOOT
> + help
> + POWER secure variables are managed and controlled by firmware.
> + These variables are exposed to userspace via sysfs to enable
> + read/write operations on these variables. Say Y if you have
> + secure boot enabled and want to expose variables to userspace.
> +
> endmenu
>
> config ISA_DMA_API
> diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
> index 9041563f1c74..4ea7b738c3a3 100644
> --- a/arch/powerpc/kernel/Makefile
> +++ b/arch/powerpc/kernel/Makefile
> @@ -158,6 +158,7 @@ obj-$(CONFIG_EPAPR_PARAVIRT) += epapr_paravirt.o epapr_hcalls.o
> obj-$(CONFIG_KVM_GUEST) += kvm.o kvm_emul.o
>
> obj-$(CONFIG_PPC_SECURE_BOOT) += secboot.o ima_arch.o secvar-ops.o
> +obj-$(CONFIG_SECVAR_SYSFS) += secvar-sysfs.o
>
> # Disable GCOV, KCOV & sanitizers in odd or sensitive code
> GCOV_PROFILE_prom_init.o := n
> diff --git a/arch/powerpc/kernel/secvar-sysfs.c b/arch/powerpc/kernel/secvar-sysfs.c
> new file mode 100644
> index 000000000000..e46986bb29a0
> --- /dev/null
> +++ b/arch/powerpc/kernel/secvar-sysfs.c
> @@ -0,0 +1,210 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 IBM Corporation <[email protected]>
> + *
> + * This code exposes secure variables to user via sysfs
> + */
> +
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/compat.h>
> +#include <linux/string.h>
> +#include <asm/opal.h>
> +#include <asm/secvar.h>
> +
> +//Approximating it for now, it is bound to change.
> +#define VARIABLE_MAX_SIZE 32000
this needs to be communicated from the secvar backend, maybe via a
field in the ops structure?
> +
> +static struct kobject *powerpc_kobj;
Call it secvar_kobj or something.
> +static struct secvar_operations *secvarops;
Ah, the old I-can't-believe-it's-not-global trick.
> +struct kset *secvar_kset;
shouldn't that be static too?
> +
> +static ssize_t name_show(struct kobject *kobj, struct kobj_attribute *attr,
> + char *buf)
> +{
> + return sprintf(buf, "%s", kobj->name);
> +}
> +
> +static ssize_t size_show(struct kobject *kobj, struct kobj_attribute *attr,
> + char *buf)
> +{
> + unsigned long dsize;
> + int rc;
> +
> + rc = secvarops->get_variable(kobj->name, strlen(kobj->name) + 1, NULL,
> + &dsize);
> + if (rc) {
> + pr_err("Error retrieving variable size %d\n", rc);
> + return rc;
> + }
> +
> + rc = sprintf(buf, "%ld", dsize);
> +
> + return rc;
> +}
> +
> +static ssize_t data_read(struct file *filep, struct kobject *kobj,
> + struct bin_attribute *attr, char *buf, loff_t off,
> + size_t count)
> +{
> + unsigned long dsize;
> + int rc;
> + char *data;
> +
> + rc = secvarops->get_variable(kobj->name, strlen(kobj->name) + 1, NULL,
> + &dsize);
> + if (rc) {
> + pr_err("Error getting variable size %d\n", rc);
> + return rc;
> + }
> + pr_debug("dsize is %ld\n", dsize);
> +
> + data = kzalloc(dsize, GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + rc = secvarops->get_variable(kobj->name, strlen(kobj->name)+1, data,
> + &dsize);
> + if (rc) {
> + pr_err("Error getting variable %d\n", rc);
> + goto data_fail;
> + }
> +
> + rc = memory_read_from_buffer(buf, count, &off, data, dsize);
> +
> +data_fail:
> + kfree(data);
> + return rc;
> +}
> +
> +static ssize_t update_write(struct file *filep, struct kobject *kobj,
> + struct bin_attribute *attr, char *buf, loff_t off,
> + size_t count)
> +{
> + int rc;
> +
> + pr_debug("count is %ld\n", count);
> + rc = secvarops->set_variable(kobj->name, strlen(kobj->name)+1, buf,
> + count);
> + if (rc) {
> + pr_err("Error setting the variable %s\n", kobj->name);
> + return rc;
> + }
> +
> + return count;
> +}
> +
> +static struct kobj_attribute name_attr =
> +__ATTR(name, 0444, name_show, NULL);
> +
> +static struct kobj_attribute size_attr =
> +__ATTR(size, 0444, size_show, NULL);
> +
> +static struct bin_attribute data_attr = {
> + .attr = {.name = "data", .mode = 0444},
> + .size = VARIABLE_MAX_SIZE,
> + .read = data_read,
> +};
Should they be globally readable? If efivars is globally readable I'm
happy to follow that example, but mpe might have opinions.
> +
> +
> +static struct bin_attribute update_attr = {
> + .attr = {.name = "update", .mode = 0200},
> + .size = VARIABLE_MAX_SIZE,
> + .write = update_write,
> +};
> +
> +static struct bin_attribute *secvar_bin_attrs[] = {
> + &data_attr,
> + &update_attr,
> + NULL,
> +};
> +
> +static struct attribute *secvar_attrs[] = {
> + &name_attr.attr,
> + &size_attr.attr,
> + NULL,
> +};
> +
> +const struct attribute_group secvar_attr_group = {
> + .attrs = secvar_attrs,
> + .bin_attrs = secvar_bin_attrs,
> +};
> +
> +int secvar_sysfs_load(void)
> +{
> +
> + char *name;
> + unsigned long namesize;
> + struct kobject *kobj;
> + int status;
> + int rc = 0;
> +
> + name = kzalloc(1024, GFP_KERNEL);
> + if (!name)
> + return -ENOMEM;
Where'd the 1024 restriction on the length of the variable name come
from? is that enforced by firmware? If so, how does firmware
communicate the limited key length?
> +
> + do {
> +
> + status = secvarops->get_next_variable(name, &namesize, 1024);
does namesize need to be initialised for the first call?
> + if (status != OPAL_SUCCESS)
> + break;
You might want to differentiate between the error case and the "no
extra variables" case. Come to think of it, since the point of
abstracting secvar ops is to make this code indepdendent of the backend
why are we checking for OPAL_SUCCESS? The ops functions should be
returning linux return code (EIO, etc) rather than OPAL codes.
> +
> + pr_info("name is %s\n", name);
pr_info?
> + kobj = kobject_create_and_add(name, &(secvar_kset->kobj));
> + if (kobj) {
> + rc = sysfs_create_group(kobj, &secvar_attr_group);
> + if (rc)
> + pr_err("Error creating attributes for %s variable\n",
> + name);
> + } else {
> + pr_err("Error creating sysfs entry for %s variable\n",
> + name);
> + rc = -EINVAL;
> + }
> +
> + } while ((status == OPAL_SUCCESS) && (rc == 0));
Checking status here isn't needed here since we checked it above and
broken out of the loop.
> +
> + kfree(name);
> + return rc;
> +}
> +
> +int secvar_sysfs_init(void)
> +{
> + powerpc_kobj = kobject_create_and_add("secvar", firmware_kobj);
> + if (!powerpc_kobj) {
> + pr_err("secvar: Failed to create firmware kobj\n");
> + return -ENODEV;
> + }
> +
> + secvar_kset = kset_create_and_add("vars", NULL, powerpc_kobj);
> + if (!secvar_kset) {
> + pr_err("secvar: sysfs kobject registration failed.\n");
> + return -ENODEV;
> + }
> +
> + secvarops = get_secvar_ops();
> + if (!secvarops) {
> + kobject_put(powerpc_kobj);
> + pr_err("secvar: failed to retrieve secvar operations.\n");
> + return -ENODEV;
> + }
Not having secvar support isn't an error. IMO checking if the ops are
defined is the first thing you should be doing. If we don't have a
defined set of ops then we don't need to do anything else.
> +
> + secvar_sysfs_load();
> + pr_info("Secure variables sysfs initialized");
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(secvar_sysfs_init);
> +
> +static void secvar_sysfs_exit(void)
> +{
> + kobject_put(powerpc_kobj);
> +}
> +EXPORT_SYMBOL_GPL(secvar_sysfs_exit);
> +
> +module_init(secvar_sysfs_init);
> +module_exit(secvar_sysfs_exit);
> +
> +MODULE_AUTHOR("Nayna Jain<[email protected]>");
needs a space between your name and the opening '<' of the email
> +MODULE_DESCRIPTION("sysfs interface to POWER secure variables");
> +MODULE_LICENSE("GPL");