Update the max-freqquncy to 50MHz, also adding "fast,read,m25p80" property.
Align the QSPI node with other similar boards like(ls1088ardb,
ls1046afrwy) as per bindings.
Also, correct compatible node to fix this warning:
m25p80 spi0.0: found s25fl512s, expected m25p80
m25p80 spi0.1: found s25fl512s, expected m25p80
Signed-off-by: Ashish Kumar <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 6a6514d..9c4113a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -101,21 +101,23 @@
&qspi {
status = "okay";
- qflash0: flash@0 {
- compatible = "spansion,m25p80";
+ qflash0: s25fs512a@0 {
+ compatible = "spansion,s25fs512a", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
- spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
reg = <0>;
};
- qflash1: flash@1 {
- compatible = "spansion,m25p80";
+ qflash1: s25fs152a@1 {
+ compatible = "spansion,s25fs512a", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
- spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
reg = <1>;
--
2.7.4