add peripheral pinctrl controller to a1 soc
Signed-off-by: Qianggui Song <[email protected]>
Signed-off-by: Xingyu Chen <[email protected]>
Signed-off-by: Jianxin Pan <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 7210ad0..0965259 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-a1-gpio.h>
/ {
compatible = "amlogic,a1";
@@ -74,6 +75,23 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
+ periphs_pinctrl: pinctrl@0400 {
+ compatible = "amlogic,meson-a1-periphs-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio: bank@0400 {
+ reg = <0x0 0x0400 0x0 0x003c>,
+ <0x0 0x0480 0x0 0x0118>;
+ reg-names = "mux", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 0 62>;
+ };
+
+ };
+
uart_AO: serial@1c00 {
compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
--
1.9.1