Thermal framework takes 0 as the lowest/default state for a
cooling/warming device. The current code has the order reverted with
1 corresponding to lowest state in hardware and 0 the highest state.
Invert this for a better fit with the thermal framework.
Signed-off-by: Thara Gopinath <[email protected]>
---
drivers/soc/qcom/qcom_aoss.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
index 33a27e6..006ac40 100644
--- a/drivers/soc/qcom/qcom_aoss.c
+++ b/drivers/soc/qcom/qcom_aoss.c
@@ -44,7 +44,7 @@
#define QMP_NUM_COOLING_RESOURCES 2
-static bool qmp_cdev_init_state = 1;
+static bool qmp_cdev_max_state = 1;
struct qmp_cooling_device {
struct thermal_cooling_device *cdev;
@@ -402,7 +402,7 @@ static void qmp_pd_remove(struct qmp *qmp)
static int qmp_cdev_get_max_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
- *state = qmp_cdev_init_state;
+ *state = qmp_cdev_max_state;
return 0;
}
@@ -432,7 +432,7 @@ static int qmp_cdev_set_cur_state(struct thermal_cooling_device *cdev,
snprintf(buf, sizeof(buf),
"{class: volt_flr, event:zero_temp, res:%s, value:%s}",
qmp_cdev->name,
- cdev_state ? "off" : "on");
+ cdev_state ? "on" : "off");
ret = qmp_send(qmp_cdev->qmp, buf, sizeof(buf));
@@ -455,7 +455,7 @@ static int qmp_cooling_device_add(struct qmp *qmp,
char *cdev_name = (char *)node->name;
qmp_cdev->qmp = qmp;
- qmp_cdev->state = qmp_cdev_init_state;
+ qmp_cdev->state = !qmp_cdev_max_state;
qmp_cdev->name = cdev_name;
qmp_cdev->cdev = devm_thermal_of_cooling_device_register
(qmp->dev, node,
--
2.1.4