2019-09-20 19:16:23

by Stefan Riedmüller

Subject: [PATCH v2 2/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 devicetree bindings

Add devicetree bindings for i.MX6 based phyCORE-i.MX6, phyBOARD-Mira and
phyFLEX-i.MX6.

Signed-off-by: Stefan Riedmueller <[email protected]>
---
Changes in v2:
- Use seperate description for each board instead of squashing them into
the standard board.
---
Documentation/devicetree/bindings/arm/fsl.yaml | 37 ++++++++++++++++++++++++++
1 file changed, 37 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index c926ff6eac67..7dbb45cebb86 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -116,6 +116,21 @@ properties:
- technologic,imx6q-ts7970
- const: fsl,imx6q

+ - description: i.MX6Q PHYTEC phyBOARD-Mira
+ items:
+ - enum:
+ - phytec,imx6q-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
+ - phytec,imx6q-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
+ - const: phytec,imx6q-pbac06 # PHYTEC phyBOARD-Mira
+ - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
+ - const: fsl,imx6q
+
+ - description: i.MX6Q PHYTEC phyFLEX-i.MX6
+ items:
+ - const: phytec,imx6q-pbab01 # PHYTEC phyFLEX carrier board
+ - const: phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
+ - const: fsl,imx6q
+
- description: i.MX6QP based Boards
items:
- enum:
@@ -123,6 +138,13 @@ properties:
- fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board
- const: fsl,imx6qp

+ - description: i.MX6QP PHYTEC phyBOARD-Mira
+ items:
+ - const: phytec,imx6qp-pbac06-nand
+ - const: phytec,imx6qp-pbac06 # PHYTEC phyBOARD-Mira
+ - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
+ - const: fsl,imx6qp
+
- description: i.MX6DL based Boards
items:
- enum:
@@ -138,6 +160,21 @@ properties:
- ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board
- const: fsl,imx6dl

+ - description: i.MX6DL PHYTEC phyBOARD-Mira
+ items:
+ - enum:
+ - phytec,imx6dl-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
+ - phytec,imx6dl-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
+ - const: phytec,imx6dl-pbac06 # PHYTEC phyBOARD-Mira
+ - const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
+ - const: fsl,imx6dl
+
+ - description: i.MX6DL PHYTEC phyFLEX-i.MX6
+ items:
+ - const: phytec,imx6dl-pbab01 # PHYTEC phyFLEX carrier board
+ - const: phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
+ - const: fsl,imx6dl
+
- description: i.MX6SL based Boards
items:
- enum:
--
2.7.4

2019-10-02 05:58:15

by Rob Herring (Arm)

Subject: Re: [PATCH v2 2/2] dt-bindings: arm: fsl: Add PHYTEC i.MX6 devicetree bindings

On Fri, 20 Sep 2019 13:52:26 +0200, Stefan Riedmueller wrote:
> Add devicetree bindings for i.MX6 based phyCORE-i.MX6, phyBOARD-Mira and
> phyFLEX-i.MX6.
>
> Signed-off-by: Stefan Riedmueller <[email protected]>
> ---
> Changes in v2:
> - Use seperate description for each board instead of squashing them into
> the standard board.
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 37 ++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>

Reviewed-by: Rob Herring <[email protected]>