2019-10-08 01:30:58

by Anson Huang

Subject: [PATCH V2 2/3] arm64: dts: imx8mm-evk: Add i2c3 support

Enable i2c3 for i.MX8MM EVK board.

Signed-off-by: Anson Huang <[email protected]>
---
No changes.
---
arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index f6d367c..9624d7d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -244,6 +244,13 @@
};
};

+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
@@ -355,6 +362,13 @@
>;
};

+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+ >;
+ };
+
pinctrl_pmic: pmicirq {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
--
2.7.4

2019-10-08 01:44:37

by Fabio Estevam

Subject: Re: [PATCH V2 2/3] arm64: dts: imx8mm-evk: Add i2c3 support

Hi Anson,

On Mon, Oct 7, 2019 at 10:28 PM Anson Huang <[email protected]> wrote:
>
> Enable i2c3 for i.MX8MM EVK board.
>
> Signed-off-by: Anson Huang <[email protected]>

You could combine this patch with 3/3.