Add ZynqMP firmware AES API to perform encryption/decryption of given data.
Signed-off-by: Kalyani Akula <[email protected]>
---
drivers/firmware/xilinx/zynqmp.c | 23 +++++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 2 ++
2 files changed, 25 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index fd3d837..7ddf38e 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -664,6 +664,28 @@ static int zynqmp_pm_set_requirement(const u32 node, const u32 capabilities,
qos, ack, NULL);
}
+/**
+ * zynqmp_pm_aes - Access AES hardware to encrypt/decrypt the data using
+ * AES-GCM core.
+ * @address: Address of the AesParams structure.
+ * @out: Returned output value
+ *
+ * Return: Returns status, either success or error code.
+ */
+static int zynqmp_pm_aes_engine(const u64 address, u32 *out)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!out)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_SECURE_AES, upper_32_bits(address),
+ lower_32_bits(address),
+ 0, 0, ret_payload);
+ *out = ret_payload[1];
+ return ret;
+}
static const struct zynqmp_eemi_ops eemi_ops = {
.get_api_version = zynqmp_pm_get_api_version,
.get_chipid = zynqmp_pm_get_chipid,
@@ -687,6 +709,7 @@ static int zynqmp_pm_set_requirement(const u32 node, const u32 capabilities,
.set_requirement = zynqmp_pm_set_requirement,
.fpga_load = zynqmp_pm_fpga_load,
.fpga_get_status = zynqmp_pm_fpga_get_status,
+ .aes = zynqmp_pm_aes_engine,
};
/**
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 778abbb..508edd7 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -77,6 +77,7 @@ enum pm_api_id {
PM_CLOCK_GETRATE,
PM_CLOCK_SETPARENT,
PM_CLOCK_GETPARENT,
+ PM_SECURE_AES = 47,
};
/* PMU-FW return status codes */
@@ -294,6 +295,7 @@ struct zynqmp_eemi_ops {
const u32 capabilities,
const u32 qos,
const enum zynqmp_pm_request_ack ack);
+ int (*aes)(const u64 address, u32 *out);
};
int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
--
1.9.5