i.MX7D SDB Rev-A board should use its own board compatible
string instead of default i.MX7D SDB board.
Signed-off-by: Anson Huang <[email protected]>
---
arch/arm/boot/dts/imx7d-sdb-reva.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-sdb-reva.dts b/arch/arm/boot/dts/imx7d-sdb-reva.dts
index 7ce9d8c..cabdaa6 100644
--- a/arch/arm/boot/dts/imx7d-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx7d-sdb-reva.dts
@@ -7,6 +7,9 @@
#include "imx7d-sdb.dts"
/ {
+ model = "Freescale i.MX7 SabreSD RevA Board";
+ compatible = "fsl,imx7d-sdb-reva", "fsl,imx7d";
+
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>;
gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
--
2.7.4
Add board binding for i.MX7D-SDB Rev-A board which is already
supported.
Signed-off-by: Anson Huang <[email protected]>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index a41d9e00..70ceeac 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -241,6 +241,7 @@ properties:
items:
- enum:
- fsl,imx7d-sdb # i.MX7 SabreSD Board
+ - fsl,imx7d-sdb-reva # i.MX7 SabreSD Rev-A Board
- novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board
- toradex,colibri-imx7d # Colibri iMX7 Dual Module
- toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module
--
2.7.4
On Thu, 7 Nov 2019 10:14:53 +0800, Anson Huang wrote:
> Add board binding for i.MX7D-SDB Rev-A board which is already
> supported.
>
> Signed-off-by: Anson Huang <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <[email protected]>
On Thu, Nov 07, 2019 at 10:14:52AM +0800, Anson Huang wrote:
> i.MX7D SDB Rev-A board should use its own board compatible
> string instead of default i.MX7D SDB board.
>
> Signed-off-by: Anson Huang <[email protected]>
Applied both, thanks.