2019-11-20 07:48:13

by Kalyani Akula

Subject: [PATCH V4 1/4] dt-bindings: crypto: Add bindings for ZynqMP AES driver

Add documentation to describe Xilinx ZynqMP AES driver bindings.

Signed-off-by: Kalyani Akula <[email protected]>
---
Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.txt | 12 ++++++++++++
1 file changed, 12 insertions(+)
create mode 100644 Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.txt

diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.txt b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.txt
new file mode 100644
index 0000000..226bfb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.txt
@@ -0,0 +1,12 @@
+Xilinx ZynqMP AES hw acceleration support
+
+The ZynqMP PS-AES hw accelerator is used to encrypt/decrypt
+the given user data.
+
+Required properties:
+- compatible: should contain "xlnx,zynqmp-aes"
+
+Example:
+ zynqmp_aes {
+ compatible = "xlnx,zynqmp-aes";
+ };
--
1.9.5

2020-01-21 09:27:01

by Michal Simek

Subject: Re: [PATCH V4 1/4] dt-bindings: crypto: Add bindings for ZynqMP AES driver

On 20. 11. 19 8:43, Kalyani Akula wrote:
> Add documentation to describe Xilinx ZynqMP AES driver bindings.
>
> Signed-off-by: Kalyani Akula <[email protected]>
> ---
> Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.txt | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.txt
>
> diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.txt b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.txt
> new file mode 100644
> index 0000000..226bfb9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.txt
> @@ -0,0 +1,12 @@
> +Xilinx ZynqMP AES hw acceleration support
> +
> +The ZynqMP PS-AES hw accelerator is used to encrypt/decrypt
> +the given user data.
> +
> +Required properties:
> +- compatible: should contain "xlnx,zynqmp-aes"
> +
> +Example:
> + zynqmp_aes {
> + compatible = "xlnx,zynqmp-aes";
> + };
>

Ok. This should be converted to yaml and it should be placed to
zynqmp_firmware node as is done for clk, pcap, nvmem, power, reset and
genpd.

Thanks,
Michal