From: Stefan Wahren <[email protected]>
The reset counter is specific for every QCA700x chip. So move this
into the private driver struct. Otherwise we get unpredictable reset
behavior in setups with multiple QCA700x chips.
Fixes: 291ab06ecf67 (net: qualcomm: new Ethernet over SPI driver for QCA7000)
Signed-off-by: Stefan Wahren <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
---
drivers/net/ethernet/qualcomm/qca_spi.c | 9 ++++-----
drivers/net/ethernet/qualcomm/qca_spi.h | 1 +
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index 351f24f..baac016 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -496,7 +496,6 @@ qcaspi_qca7k_sync(struct qcaspi *qca, int event)
u16 signature = 0;
u16 spi_config;
u16 wrbuf_space = 0;
- static u16 reset_count;
if (event == QCASPI_EVENT_CPUON) {
/* Read signature twice, if not valid
@@ -549,13 +548,13 @@ qcaspi_qca7k_sync(struct qcaspi *qca, int event)
qca->sync = QCASPI_SYNC_RESET;
qca->stats.trig_reset++;
- reset_count = 0;
+ qca->reset_count = 0;
break;
case QCASPI_SYNC_RESET:
- reset_count++;
+ qca->reset_count++;
netdev_dbg(qca->net_dev, "sync: waiting for CPU on, count %u.\n",
- reset_count);
- if (reset_count >= QCASPI_RESET_TIMEOUT) {
+ qca->reset_count);
+ if (qca->reset_count >= QCASPI_RESET_TIMEOUT) {
/* reset did not seem to take place, try again */
qca->sync = QCASPI_SYNC_UNKNOWN;
qca->stats.reset_timeout++;
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.h b/drivers/net/ethernet/qualcomm/qca_spi.h
index eb9af45..d13a67e 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.h
+++ b/drivers/net/ethernet/qualcomm/qca_spi.h
@@ -94,6 +94,7 @@ struct qcaspi {
unsigned int intr_req;
unsigned int intr_svc;
+ u16 reset_count;
#ifdef CONFIG_DEBUG_FS
struct dentry *device_root;
--
2.7.4