2019-12-04 10:59:19

by Ashish Kumar

[permalink] [raw]
Subject: [Patch v2 2/5] arm64: dts: ls1046a: Add QSPI node for ls1046afrwy

From: Kuldeep Singh <[email protected]>

This board has a single 64MB mt25qu512a flash.
QUAD I/O read and single I/O write is tested.

Signed-off-by: Kuldeep Singh <[email protected]>
Signed-off-by: Ashish Kumar <[email protected]>
---
v2:
Rebased to top

arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
index 3595be0f2527..db3d303093f6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
@@ -112,6 +112,20 @@

};

+&qspi {
+ status = "okay";
+
+ mt25qu512a0: flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ reg = <0>;
+ };
+};
+
#include "fsl-ls1046-post.dtsi"

&fman0 {
--
2.17.1