From: Yunsheng Lin <[email protected]>
The hardware can not handle short frames below or equal to 32
bytes according to the hardware user manual, and it will trigger
a RAS error when the frame's length is below 33 bytes.
This patch pads the SKB when skb->len is below 33 bytes before
sending it to hardware.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 69545dd..b3deb5e 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -54,6 +54,8 @@ MODULE_PARM_DESC(debug, " Network interface message level setting");
#define HNS3_INNER_VLAN_TAG 1
#define HNS3_OUTER_VLAN_TAG 2
+#define HNS3_MIN_TX_LEN 33U
+
/* hns3_pci_tbl - PCI Device ID Table
*
* Last entry must be all 0s
@@ -1405,6 +1407,10 @@ netdev_tx_t hns3_nic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
int bd_num = 0;
int ret;
+ /* Hardware can only handle short frames above 32 bytes */
+ if (skb_put_padto(skb, HNS3_MIN_TX_LEN))
+ return NETDEV_TX_OK;
+
/* Prefetch the data used later */
prefetch(skb->data);
--
2.7.4
From: Huazhong Tan <[email protected]>
Date: Wed, 15 Jan 2020 10:46:45 +0800
> From: Yunsheng Lin <[email protected]>
>
> The hardware can not handle short frames below or equal to 32
> bytes according to the hardware user manual, and it will trigger
> a RAS error when the frame's length is below 33 bytes.
>
> This patch pads the SKB when skb->len is below 33 bytes before
> sending it to hardware.
>
> Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
> Signed-off-by: Yunsheng Lin <[email protected]>
> Signed-off-by: Huazhong Tan <[email protected]>
Applied and queued up for -stable.