2020-02-12 11:23:14

by Sandeep Maheswaram

Subject: [PATCH v3 4/4] arm64: dts: qcom: sc7180: Correct qmp phy reset entries

The phy reset entries were incorrect.so swapped them.

Signed-off-by: Sandeep Maheswaram <[email protected]>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 8011c5f..63bd7f1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1081,8 +1081,8 @@
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
clock-names = "aux", "cfg_ahb", "ref", "com_aux";

- resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
- <&gcc GCC_USB3_PHY_PRIM_BCR>;
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";

usb_1_ssphy: phy@88e9200 {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

2020-02-12 20:57:26

by Matthias Kaehlcke

Subject: Re: [PATCH v3 4/4] arm64: dts: qcom: sc7180: Correct qmp phy reset entries

On Wed, Feb 12, 2020 at 04:51:28PM +0530, Sandeep Maheswaram wrote:
> The phy reset entries were incorrect.so swapped them.
>
> Signed-off-by: Sandeep Maheswaram <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 8011c5f..63bd7f1 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -1081,8 +1081,8 @@
> <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
> clock-names = "aux", "cfg_ahb", "ref", "com_aux";
>
> - resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
> - <&gcc GCC_USB3_PHY_PRIM_BCR>;
> + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
> + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
> reset-names = "phy", "common";
>
> usb_1_ssphy: phy@88e9200 {

Reviewed-by: Matthias Kaehlcke <[email protected]>