LinuxLists.cc - [PATCH 1/2] arm64: dts: mt8183: Add gce setting in display node

2020-02-12 09:55:51

Subject: [PATCH 1/2] arm64: dts: mt8183: Add gce setting in display node

In order to use GCE function, we need add some information
into display node (mboxes, mediatek,gce-client-reg, mediatek,gce-events).

Signed-off-by: Bibby Hsieh <[email protected]>
Signed-off-by: Yongqiang Niu <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index be4428c92f35..1f0fc281bc2d 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/power/mt8183-power.h>
+#include <dt-bindings/gce/mt8183-gce.h>
#include "mt8183-pinfunc.h"

/ {
@@ -664,6 +665,9 @@
reg = <0 0x14000000 0 0x1000>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
#clock-cells = <1>;
+ mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST 1>,
+ <&gce 1 CMDQ_THR_PRIO_HIGHEST 1>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
};

ovl0: ovl@14008000 {
@@ -672,6 +676,7 @@
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_OVL0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
};

ovl_2l0: ovl@14009000 {
@@ -680,6 +685,7 @@
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
};

ovl_2l1: ovl@1400a000 {
@@ -688,6 +694,7 @@
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
};

rdma0: rdma@1400b000 {
@@ -697,6 +704,7 @@
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
mediatek,rdma_fifo_size = <5120>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
};

rdma1: rdma@1400c000 {
@@ -706,6 +714,7 @@
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
mediatek,rdma_fifo_size = <2048>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
};

color0: color@1400e000 {
@@ -715,6 +724,7 @@
interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
};

ccorr0: ccorr@1400f000 {
@@ -723,6 +733,7 @@
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
};

aal0: aal@14010000 {
@@ -732,6 +743,7 @@
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_AAL0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
};

gamma0: gamma@14011000 {
@@ -741,6 +753,7 @@
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
};

dither0: dither@14012000 {
@@ -749,6 +762,7 @@
interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
};

mutex: mutex@14016000 {
@@ -756,6 +770,8 @@
reg = <0 0x14016000 0 0x1000>;
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
+ mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>,
+ <CMDQ_EVENT_MUTEX_STREAM_DONE1>;
};

smi_common: smi@14019000 {
--
2.18.0

2020-02-12 10:49:03

by CK Hu (胡俊光)

[permalink] [raw]

Subject: Re: [PATCH 1/2] arm64: dts: mt8183: Add gce setting in display node

On Wed, 2020-02-12 at 17:55 +0800, Bibby Hsieh wrote:
> In order to use GCE function, we need add some information
> into display node (mboxes, mediatek,gce-client-reg, mediatek,gce-events).
>
> Signed-off-by: Bibby Hsieh <[email protected]>
> Signed-off-by: Yongqiang Niu <[email protected]>
> ---
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index be4428c92f35..1f0fc281bc2d 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -9,6 +9,7 @@
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/power/mt8183-power.h>
> +#include <dt-bindings/gce/mt8183-gce.h>
> #include "mt8183-pinfunc.h"
>
> / {
> @@ -664,6 +665,9 @@
> reg = <0 0x14000000 0 0x1000>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> #clock-cells = <1>;
> + mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST 1>,

I would like to remove atomic parameter, so please follow [1] to remove
it.

[1] https://patchwork.kernel.org/patch/10765419/

Regards,
CK

> + <&gce 1 CMDQ_THR_PRIO_HIGHEST 1>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
> };
>
> ovl0: ovl@14008000 {
> @@ -672,6 +676,7 @@
> interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_OVL0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
> };
>
> ovl_2l0: ovl@14009000 {
> @@ -680,6 +685,7 @@
> interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
> };
>
> ovl_2l1: ovl@1400a000 {
> @@ -688,6 +694,7 @@
> interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
> };
>
> rdma0: rdma@1400b000 {
> @@ -697,6 +704,7 @@
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_RDMA0>;
> mediatek,rdma_fifo_size = <5120>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
> };
>
> rdma1: rdma@1400c000 {
> @@ -706,6 +714,7 @@
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_RDMA1>;
> mediatek,rdma_fifo_size = <2048>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
> };
>
> color0: color@1400e000 {
> @@ -715,6 +724,7 @@
> interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_COLOR0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
> };
>
> ccorr0: ccorr@1400f000 {
> @@ -723,6 +733,7 @@
> interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_CCORR0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
> };
>
> aal0: aal@14010000 {
> @@ -732,6 +743,7 @@
> interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_AAL0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
> };
>
> gamma0: gamma@14011000 {
> @@ -741,6 +753,7 @@
> interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
> };
>
> dither0: dither@14012000 {
> @@ -749,6 +762,7 @@
> interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_DITHER0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
> };
>
> mutex: mutex@14016000 {
> @@ -756,6 +770,8 @@
> reg = <0 0x14016000 0 0x1000>;
> interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> + mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>,
> + <CMDQ_EVENT_MUTEX_STREAM_DONE1>;
> };
>
> smi_common: smi@14019000 {

2020-02-13 01:27:34

by Bibby Hsieh

[permalink] [raw]

Subject: Re: [PATCH 1/2] arm64: dts: mt8183: Add gce setting in display node

On Wed, 2020-02-12 at 18:48 +0800, CK Hu wrote:
> On Wed, 2020-02-12 at 17:55 +0800, Bibby Hsieh wrote:
> > In order to use GCE function, we need add some information
> > into display node (mboxes, mediatek,gce-client-reg, mediatek,gce-events).
> >
> > Signed-off-by: Bibby Hsieh <[email protected]>
> > Signed-off-by: Yongqiang Niu <[email protected]>
> > ---
> > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 16 ++++++++++++++++
> > 1 file changed, 16 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > index be4428c92f35..1f0fc281bc2d 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > @@ -9,6 +9,7 @@
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > #include <dt-bindings/interrupt-controller/irq.h>
> > #include <dt-bindings/power/mt8183-power.h>
> > +#include <dt-bindings/gce/mt8183-gce.h>
> > #include "mt8183-pinfunc.h"
> >
> > / {
> > @@ -664,6 +665,9 @@
> > reg = <0 0x14000000 0 0x1000>;
> > power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> > #clock-cells = <1>;
> > + mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST 1>,
>
> I would like to remove atomic parameter, so please follow [1] to remove
> it.
>
> [1] https://patchwork.kernel.org/patch/10765419/

Hi, CK,

Yeah, I'm trying remove atomic feature.

Thanks

Bibby
>
> Regards,
> CK
>
> > + <&gce 1 CMDQ_THR_PRIO_HIGHEST 1>;
> > + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
> > };
> >
> > ovl0: ovl@14008000 {
> > @@ -672,6 +676,7 @@
> > interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
> > power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> > clocks = <&mmsys CLK_MM_DISP_OVL0>;
> > + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
> > };
> >
> > ovl_2l0: ovl@14009000 {
> > @@ -680,6 +685,7 @@
> > interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
> > power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> > clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
> > + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
> > };
> >
> > ovl_2l1: ovl@1400a000 {
> > @@ -688,6 +694,7 @@
> > interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_LOW>;
> > power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> > clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
> > + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
> > };
> >
> > rdma0: rdma@1400b000 {
> > @@ -697,6 +704,7 @@
> > power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> > clocks = <&mmsys CLK_MM_DISP_RDMA0>;
> > mediatek,rdma_fifo_size = <5120>;
> > + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
> > };
> >
> > rdma1: rdma@1400c000 {
> > @@ -706,6 +714,7 @@
> > power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> > clocks = <&mmsys CLK_MM_DISP_RDMA1>;
> > mediatek,rdma_fifo_size = <2048>;
> > + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
> > };
> >
> > color0: color@1400e000 {
> > @@ -715,6 +724,7 @@
> > interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_LOW>;
> > power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> > clocks = <&mmsys CLK_MM_DISP_COLOR0>;
> > + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
> > };
> >
> > ccorr0: ccorr@1400f000 {
> > @@ -723,6 +733,7 @@
> > interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
> > power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> > clocks = <&mmsys CLK_MM_DISP_CCORR0>;
> > + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
> > };
> >
> > aal0: aal@14010000 {
> > @@ -732,6 +743,7 @@
> > interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
> > power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> > clocks = <&mmsys CLK_MM_DISP_AAL0>;
> > + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
> > };
> >
> > gamma0: gamma@14011000 {
> > @@ -741,6 +753,7 @@
> > interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
> > power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> > clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
> > + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
> > };
> >
> > dither0: dither@14012000 {
> > @@ -749,6 +762,7 @@
> > interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
> > power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> > clocks = <&mmsys CLK_MM_DISP_DITHER0>;
> > + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
> > };
> >
> > mutex: mutex@14016000 {
> > @@ -756,6 +770,8 @@
> > reg = <0 0x14016000 0 0x1000>;
> > interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
> > power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> > + mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>,
> > + <CMDQ_EVENT_MUTEX_STREAM_DONE1>;
> > };
> >
> > smi_common: smi@14019000 {
>
>