Use new pin names containing DCE/DTE for UART RX/TX/RTS/CTS pins, this
is to distinguish the DCE/DTE functions.
Signed-off-by: Anson Huang <[email protected]>
Reviewed-by: Uwe Kleine-K枚nig <[email protected]>
---
No change.
---
arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index 25d4aa9..ee64565 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -235,28 +235,28 @@
pinctrl_uart1: uart1grp {
fsl,pins =
- <MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>,
- <MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1>;
+ <MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1>,
+ <MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1>;
};
pinctrl_uart2: uart2grp {
fsl,pins =
- <MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1>,
- <MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1>;
+ <MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1>,
+ <MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1>;
};
pinctrl_uart3: uart3grp {
fsl,pins =
- <MX6SX_PAD_SD3_DATA4__UART3_RX 0x13059>,
- <MX6SX_PAD_SD3_DATA5__UART3_TX 0x13059>,
- <MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x13059>,
- <MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x13059>;
+ <MX6SX_PAD_SD3_DATA4__UART3_DCE_RX 0x13059>,
+ <MX6SX_PAD_SD3_DATA5__UART3_DCE_TX 0x13059>,
+ <MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS 0x13059>,
+ <MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS 0x13059>;
};
pinctrl_uart5: uart5grp {
fsl,pins =
- <MX6SX_PAD_SD4_DATA4__UART5_RX 0x1b0b1>,
- <MX6SX_PAD_SD4_DATA5__UART5_TX 0x1b0b1>;
+ <MX6SX_PAD_SD4_DATA4__UART5_DCE_RX 0x1b0b1>,
+ <MX6SX_PAD_SD4_DATA5__UART5_DCE_TX 0x1b0b1>;
};
pinctrl_uart6: uart6grp {
@@ -265,10 +265,10 @@
<MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x1b0b1>,
<MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x1b0b1>,
<MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x1b0b1>,
- <MX6SX_PAD_CSI_DATA04__UART6_RX 0x1b0b1>,
- <MX6SX_PAD_CSI_DATA05__UART6_TX 0x1b0b1>,
- <MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x1b0b1>,
- <MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x1b0b1>;
+ <MX6SX_PAD_CSI_DATA04__UART6_DCE_RX 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA05__UART6_DCE_TX 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS 0x1b0b1>;
};
pinctrl_otg1_reg: otg1grp {
--
2.7.4