Use new pin names containing DCE/DTE for UART RX/TX/RTS/CTS pins, this
is to distinguish the DCE/DTE functions.
Signed-off-by: Anson Huang <[email protected]>
Reviewed-by: Uwe Kleine-König <[email protected]>
---
No change.
---
arch/arm/boot/dts/imx6sx-sabreauto.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 315044c..8259244 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -229,8 +229,8 @@
pinctrl_uart1: uart1grp {
fsl,pins = <
- MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1
>;
};
--
2.7.4