Current, PLIC driver can support only 1 PLIC on the board. However,
there can be multiple PLICs present on a two socket systems in RISC-V.
Modify the driver so that each PLIC handler can have a information
about individual PLIC registers and an irqdomain associated with it.
Tested on two socket RISC-V system based on VCU118 FPGA connected via
OmniXtend protocol.
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
---
drivers/irqchip/irq-sifive-plic.c | 81 +++++++++++++++++++------------
1 file changed, 51 insertions(+), 30 deletions(-)
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index 7c7f37393f99..c34fb3ae0ff8 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -59,7 +59,11 @@
#define PLIC_DISABLE_THRESHOLD 0xf
#define PLIC_ENABLE_THRESHOLD 0
-static void __iomem *plic_regs;
+struct plic_priv {
+ struct cpumask lmask;
+ struct irq_domain *irqdomain;
+ void __iomem *regs;
+};
struct plic_handler {
bool present;
@@ -70,6 +74,7 @@ struct plic_handler {
*/
raw_spinlock_t enable_lock;
void __iomem *enable_base;
+ struct plic_priv *priv;
};
static DEFINE_PER_CPU(struct plic_handler, plic_handlers);
@@ -88,31 +93,40 @@ static inline void plic_toggle(struct plic_handler *handler,
}
static inline void plic_irq_toggle(const struct cpumask *mask,
- int hwirq, int enable)
+ struct irq_data *d, int enable)
{
int cpu;
+ struct plic_priv *priv = irq_get_chip_data(d->irq);
- writel(enable, plic_regs + PRIORITY_BASE + hwirq * PRIORITY_PER_ID);
+ writel(enable, priv->regs + PRIORITY_BASE + d->hwirq * PRIORITY_PER_ID);
for_each_cpu(cpu, mask) {
struct plic_handler *handler = per_cpu_ptr(&plic_handlers, cpu);
- if (handler->present)
- plic_toggle(handler, hwirq, enable);
+ if (handler->present &&
+ cpumask_test_cpu(cpu, &handler->priv->lmask))
+ plic_toggle(handler, d->hwirq, enable);
}
}
static void plic_irq_unmask(struct irq_data *d)
{
- unsigned int cpu = cpumask_any_and(irq_data_get_affinity_mask(d),
- cpu_online_mask);
+ struct cpumask amask;
+ unsigned int cpu;
+ struct plic_priv *priv = irq_get_chip_data(d->irq);
+
+ cpumask_and(&amask, &priv->lmask, cpu_online_mask);
+ cpu = cpumask_any_and(irq_data_get_affinity_mask(d),
+ &amask);
if (WARN_ON_ONCE(cpu >= nr_cpu_ids))
return;
- plic_irq_toggle(cpumask_of(cpu), d->hwirq, 1);
+ plic_irq_toggle(cpumask_of(cpu), d, 1);
}
static void plic_irq_mask(struct irq_data *d)
{
- plic_irq_toggle(cpu_possible_mask, d->hwirq, 0);
+ struct plic_priv *priv = irq_get_chip_data(d->irq);
+
+ plic_irq_toggle(&priv->lmask, d, 0);
}
#ifdef CONFIG_SMP
@@ -120,17 +134,21 @@ static int plic_set_affinity(struct irq_data *d,
const struct cpumask *mask_val, bool force)
{
unsigned int cpu;
+ struct cpumask amask;
+ struct plic_priv *priv = irq_get_chip_data(d->irq);
+
+ cpumask_and(&amask, &priv->lmask, mask_val);
if (force)
- cpu = cpumask_first(mask_val);
+ cpu = cpumask_first(&amask);
else
- cpu = cpumask_any_and(mask_val, cpu_online_mask);
+ cpu = cpumask_any_and(&amask, cpu_online_mask);
if (cpu >= nr_cpu_ids)
return -EINVAL;
- plic_irq_toggle(cpu_possible_mask, d->hwirq, 0);
- plic_irq_toggle(cpumask_of(cpu), d->hwirq, 1);
+ plic_irq_toggle(&priv->lmask, d, 0);
+ plic_irq_toggle(cpumask_of(cpu), d, 1);
irq_data_update_effective_affinity(d, cpumask_of(cpu));
@@ -191,8 +209,6 @@ static const struct irq_domain_ops plic_irqdomain_ops = {
.free = irq_domain_free_irqs_top,
};
-static struct irq_domain *plic_irqdomain;
-
/*
* Handling an interrupt is a two-step process: first you claim the interrupt
* by reading the claim register, then you complete the interrupt by writing
@@ -209,7 +225,7 @@ static void plic_handle_irq(struct pt_regs *regs)
csr_clear(CSR_IE, IE_EIE);
while ((hwirq = readl(claim))) {
- int irq = irq_find_mapping(plic_irqdomain, hwirq);
+ int irq = irq_find_mapping(handler->priv->irqdomain, hwirq);
if (unlikely(irq <= 0))
pr_warn_ratelimited("can't find mapping for hwirq %lu\n",
@@ -265,15 +281,17 @@ static int __init plic_init(struct device_node *node,
{
int error = 0, nr_contexts, nr_handlers = 0, i;
u32 nr_irqs;
+ struct plic_priv *priv;
- if (plic_regs) {
- pr_warn("PLIC already present.\n");
- return -ENXIO;
- }
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
- plic_regs = of_iomap(node, 0);
- if (WARN_ON(!plic_regs))
- return -EIO;
+ priv->regs = of_iomap(node, 0);
+ if (WARN_ON(!priv->regs)) {
+ error = -EIO;
+ goto out_free_priv;
+ }
error = -EINVAL;
of_property_read_u32(node, "riscv,ndev", &nr_irqs);
@@ -287,9 +305,9 @@ static int __init plic_init(struct device_node *node,
goto out_iounmap;
error = -ENOMEM;
- plic_irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
- &plic_irqdomain_ops, NULL);
- if (WARN_ON(!plic_irqdomain))
+ priv->irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
+ &plic_irqdomain_ops, priv);
+ if (WARN_ON(!priv->irqdomain))
goto out_iounmap;
for (i = 0; i < nr_contexts; i++) {
@@ -334,13 +352,14 @@ static int __init plic_init(struct device_node *node,
goto done;
}
+ cpumask_set_cpu(cpu, &priv->lmask);
handler->present = true;
handler->hart_base =
- plic_regs + CONTEXT_BASE + i * CONTEXT_PER_HART;
+ priv->regs + CONTEXT_BASE + i * CONTEXT_PER_HART;
raw_spin_lock_init(&handler->enable_lock);
handler->enable_base =
- plic_regs + ENABLE_BASE + i * ENABLE_PER_HART;
-
+ priv->regs + ENABLE_BASE + i * ENABLE_PER_HART;
+ handler->priv = priv;
done:
for (hwirq = 1; hwirq <= nr_irqs; hwirq++)
plic_toggle(handler, hwirq, 0);
@@ -356,7 +375,9 @@ static int __init plic_init(struct device_node *node,
return 0;
out_iounmap:
- iounmap(plic_regs);
+ iounmap(priv->regs);
+out_free_priv:
+ kfree(priv);
return error;
}
--
2.25.0
The following commit has been merged into the irq/core branch of tip:
Commit-ID: f1ad1133b18f2aed3f6923cdb62b63da230accfd
Gitweb: https://git.kernel.org/tip/f1ad1133b18f2aed3f6923cdb62b63da230accfd
Author: Atish Patra <[email protected]>
AuthorDate: Mon, 02 Mar 2020 15:11:46 -08:00
Committer: Marc Zyngier <[email protected]>
CommitterDate: Mon, 16 Mar 2020 15:48:54
irqchip/sifive-plic: Add support for multiple PLICs
Current, PLIC driver can support only 1 PLIC on the board. However,
there can be multiple PLICs present on a two socket systems in RISC-V.
Modify the driver so that each PLIC handler can have a information
about individual PLIC registers and an irqdomain associated with it.
Tested on two socket RISC-V system based on VCU118 FPGA connected via
OmniXtend protocol.
Signed-off-by: Atish Patra <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
---
drivers/irqchip/irq-sifive-plic.c | 81 ++++++++++++++++++------------
1 file changed, 51 insertions(+), 30 deletions(-)
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index 7c7f373..c34fb3a 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -59,7 +59,11 @@
#define PLIC_DISABLE_THRESHOLD 0xf
#define PLIC_ENABLE_THRESHOLD 0
-static void __iomem *plic_regs;
+struct plic_priv {
+ struct cpumask lmask;
+ struct irq_domain *irqdomain;
+ void __iomem *regs;
+};
struct plic_handler {
bool present;
@@ -70,6 +74,7 @@ struct plic_handler {
*/
raw_spinlock_t enable_lock;
void __iomem *enable_base;
+ struct plic_priv *priv;
};
static DEFINE_PER_CPU(struct plic_handler, plic_handlers);
@@ -88,31 +93,40 @@ static inline void plic_toggle(struct plic_handler *handler,
}
static inline void plic_irq_toggle(const struct cpumask *mask,
- int hwirq, int enable)
+ struct irq_data *d, int enable)
{
int cpu;
+ struct plic_priv *priv = irq_get_chip_data(d->irq);
- writel(enable, plic_regs + PRIORITY_BASE + hwirq * PRIORITY_PER_ID);
+ writel(enable, priv->regs + PRIORITY_BASE + d->hwirq * PRIORITY_PER_ID);
for_each_cpu(cpu, mask) {
struct plic_handler *handler = per_cpu_ptr(&plic_handlers, cpu);
- if (handler->present)
- plic_toggle(handler, hwirq, enable);
+ if (handler->present &&
+ cpumask_test_cpu(cpu, &handler->priv->lmask))
+ plic_toggle(handler, d->hwirq, enable);
}
}
static void plic_irq_unmask(struct irq_data *d)
{
- unsigned int cpu = cpumask_any_and(irq_data_get_affinity_mask(d),
- cpu_online_mask);
+ struct cpumask amask;
+ unsigned int cpu;
+ struct plic_priv *priv = irq_get_chip_data(d->irq);
+
+ cpumask_and(&amask, &priv->lmask, cpu_online_mask);
+ cpu = cpumask_any_and(irq_data_get_affinity_mask(d),
+ &amask);
if (WARN_ON_ONCE(cpu >= nr_cpu_ids))
return;
- plic_irq_toggle(cpumask_of(cpu), d->hwirq, 1);
+ plic_irq_toggle(cpumask_of(cpu), d, 1);
}
static void plic_irq_mask(struct irq_data *d)
{
- plic_irq_toggle(cpu_possible_mask, d->hwirq, 0);
+ struct plic_priv *priv = irq_get_chip_data(d->irq);
+
+ plic_irq_toggle(&priv->lmask, d, 0);
}
#ifdef CONFIG_SMP
@@ -120,17 +134,21 @@ static int plic_set_affinity(struct irq_data *d,
const struct cpumask *mask_val, bool force)
{
unsigned int cpu;
+ struct cpumask amask;
+ struct plic_priv *priv = irq_get_chip_data(d->irq);
+
+ cpumask_and(&amask, &priv->lmask, mask_val);
if (force)
- cpu = cpumask_first(mask_val);
+ cpu = cpumask_first(&amask);
else
- cpu = cpumask_any_and(mask_val, cpu_online_mask);
+ cpu = cpumask_any_and(&amask, cpu_online_mask);
if (cpu >= nr_cpu_ids)
return -EINVAL;
- plic_irq_toggle(cpu_possible_mask, d->hwirq, 0);
- plic_irq_toggle(cpumask_of(cpu), d->hwirq, 1);
+ plic_irq_toggle(&priv->lmask, d, 0);
+ plic_irq_toggle(cpumask_of(cpu), d, 1);
irq_data_update_effective_affinity(d, cpumask_of(cpu));
@@ -191,8 +209,6 @@ static const struct irq_domain_ops plic_irqdomain_ops = {
.free = irq_domain_free_irqs_top,
};
-static struct irq_domain *plic_irqdomain;
-
/*
* Handling an interrupt is a two-step process: first you claim the interrupt
* by reading the claim register, then you complete the interrupt by writing
@@ -209,7 +225,7 @@ static void plic_handle_irq(struct pt_regs *regs)
csr_clear(CSR_IE, IE_EIE);
while ((hwirq = readl(claim))) {
- int irq = irq_find_mapping(plic_irqdomain, hwirq);
+ int irq = irq_find_mapping(handler->priv->irqdomain, hwirq);
if (unlikely(irq <= 0))
pr_warn_ratelimited("can't find mapping for hwirq %lu\n",
@@ -265,15 +281,17 @@ static int __init plic_init(struct device_node *node,
{
int error = 0, nr_contexts, nr_handlers = 0, i;
u32 nr_irqs;
+ struct plic_priv *priv;
- if (plic_regs) {
- pr_warn("PLIC already present.\n");
- return -ENXIO;
- }
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
- plic_regs = of_iomap(node, 0);
- if (WARN_ON(!plic_regs))
- return -EIO;
+ priv->regs = of_iomap(node, 0);
+ if (WARN_ON(!priv->regs)) {
+ error = -EIO;
+ goto out_free_priv;
+ }
error = -EINVAL;
of_property_read_u32(node, "riscv,ndev", &nr_irqs);
@@ -287,9 +305,9 @@ static int __init plic_init(struct device_node *node,
goto out_iounmap;
error = -ENOMEM;
- plic_irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
- &plic_irqdomain_ops, NULL);
- if (WARN_ON(!plic_irqdomain))
+ priv->irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
+ &plic_irqdomain_ops, priv);
+ if (WARN_ON(!priv->irqdomain))
goto out_iounmap;
for (i = 0; i < nr_contexts; i++) {
@@ -334,13 +352,14 @@ static int __init plic_init(struct device_node *node,
goto done;
}
+ cpumask_set_cpu(cpu, &priv->lmask);
handler->present = true;
handler->hart_base =
- plic_regs + CONTEXT_BASE + i * CONTEXT_PER_HART;
+ priv->regs + CONTEXT_BASE + i * CONTEXT_PER_HART;
raw_spin_lock_init(&handler->enable_lock);
handler->enable_base =
- plic_regs + ENABLE_BASE + i * ENABLE_PER_HART;
-
+ priv->regs + ENABLE_BASE + i * ENABLE_PER_HART;
+ handler->priv = priv;
done:
for (hwirq = 1; hwirq <= nr_irqs; hwirq++)
plic_toggle(handler, hwirq, 0);
@@ -356,7 +375,9 @@ done:
return 0;
out_iounmap:
- iounmap(plic_regs);
+ iounmap(priv->regs);
+out_free_priv:
+ kfree(priv);
return error;
}