2020-04-09 09:35:01

by Oliver Graute

[permalink] [raw]
Subject: [PATCH v1] staging: fbtft: fb_st7789v: enabled inversion

From: Oliver Graute <[email protected]>

Enable inversion mode

Signed-off-by: Oliver Graute <[email protected]>
---
drivers/staging/fbtft/fb_st7789v.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/staging/fbtft/fb_st7789v.c b/drivers/staging/fbtft/fb_st7789v.c
index 3c3f387936e8..84c5af2dc9a0 100644
--- a/drivers/staging/fbtft/fb_st7789v.c
+++ b/drivers/staging/fbtft/fb_st7789v.c
@@ -120,6 +120,10 @@ static int init_display(struct fbtft_par *par)
write_reg(par, PWCTRL1, 0xA4, 0xA1);

write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
+
+ /* enable inversion mode */
+ write_reg(par, 0x21);
+
return 0;
}

--
2.17.1


2020-04-09 10:17:32

by Dan Carpenter

[permalink] [raw]
Subject: Re: [PATCH v1] staging: fbtft: fb_st7789v: enabled inversion

On Thu, Apr 09, 2020 at 11:24:05AM +0200, Oliver Graute wrote:
> From: Oliver Graute <[email protected]>
>
> Enable inversion mode
>
> Signed-off-by: Oliver Graute <[email protected]>
> ---
> drivers/staging/fbtft/fb_st7789v.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/staging/fbtft/fb_st7789v.c b/drivers/staging/fbtft/fb_st7789v.c
> index 3c3f387936e8..84c5af2dc9a0 100644
> --- a/drivers/staging/fbtft/fb_st7789v.c
> +++ b/drivers/staging/fbtft/fb_st7789v.c
> @@ -120,6 +120,10 @@ static int init_display(struct fbtft_par *par)
> write_reg(par, PWCTRL1, 0xA4, 0xA1);
>
> write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
> +
> + /* enable inversion mode */
> + write_reg(par, 0x21);

Use the define and delete the comment.

write_reg(par, MIPI_DCS_ENTER_INVERT_MODE);

regards,
dan carpenter

2020-04-09 10:18:31

by Dan Carpenter

[permalink] [raw]
Subject: Re: [PATCH v1] staging: fbtft: fb_st7789v: enabled inversion

On Thu, Apr 09, 2020 at 11:24:05AM +0200, Oliver Graute wrote:
> From: Oliver Graute <[email protected]>
>
> Enable inversion mode

What the heck is an inversion mode and why would you want it?

regards,
dasn carpenter

2020-04-27 08:31:48

by Oliver Graute

[permalink] [raw]
Subject: Re: [PATCH v1] staging: fbtft: fb_st7789v: enabled inversion

On 09/04/20, Dan Carpenter wrote:
> On Thu, Apr 09, 2020 at 11:24:05AM +0200, Oliver Graute wrote:
> > From: Oliver Graute <[email protected]>
> >
> > Enable inversion mode
>
> What the heck is an inversion mode and why would you want it?


Should I name it:

Enable MIPI_DCS_ENTER_INVERT_MODE

Best Regards,

Oliver

2020-04-27 08:35:38

by Oliver Graute

[permalink] [raw]
Subject: Re: [PATCH v1] staging: fbtft: fb_st7789v: enabled inversion

On 09/04/20, Dan Carpenter wrote:
> On Thu, Apr 09, 2020 at 11:24:05AM +0200, Oliver Graute wrote:
> > From: Oliver Graute <[email protected]>
> >
> > Enable inversion mode
> >
> > Signed-off-by: Oliver Graute <[email protected]>
> > ---
> > drivers/staging/fbtft/fb_st7789v.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/staging/fbtft/fb_st7789v.c b/drivers/staging/fbtft/fb_st7789v.c
> > index 3c3f387936e8..84c5af2dc9a0 100644
> > --- a/drivers/staging/fbtft/fb_st7789v.c
> > +++ b/drivers/staging/fbtft/fb_st7789v.c
> > @@ -120,6 +120,10 @@ static int init_display(struct fbtft_par *par)
> > write_reg(par, PWCTRL1, 0xA4, 0xA1);
> >
> > write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
> > +
> > + /* enable inversion mode */
> > + write_reg(par, 0x21);
>
> Use the define and delete the comment.
>
> write_reg(par, MIPI_DCS_ENTER_INVERT_MODE);

ok, I'll do on next version

Best regards,

Oliver

2020-04-28 19:04:13

by Dan Carpenter

[permalink] [raw]
Subject: Re: [PATCH v1] staging: fbtft: fb_st7789v: enabled inversion

On Mon, Apr 27, 2020 at 10:29:39AM +0200, Oliver Graute wrote:
> On 09/04/20, Dan Carpenter wrote:
> > On Thu, Apr 09, 2020 at 11:24:05AM +0200, Oliver Graute wrote:
> > > From: Oliver Graute <[email protected]>
> > >
> > > Enable inversion mode
> >
> > What the heck is an inversion mode and why would you want it?
>
>
> Should I name it:
>
> Enable MIPI_DCS_ENTER_INVERT_MODE
>

What I'm saying is the changelog should explain why would want to apply
the patch. What does the inversion mode do? Is it inverting the color
or flipping something upside down?

Probably if I had a background in graphics I would know what "Enable
inversion mode" means... But three words is not a proper and complete
commit message normally.

regards,
dan carpenter