This patch provides support for displays like VGM128064B0W10,
which requires a column offset of 2, i.e., its segments starts
in SEG2 and ends in SEG129.
Signed-off-by: Rodrigo Alencar <[email protected]>
---
Documentation/devicetree/bindings/display/ssd1307fb.txt | 1 +
drivers/video/fbdev/ssd1307fb.c | 8 ++++++--
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt
index 27333b9551b3..a9b51fd724a9 100644
--- a/Documentation/devicetree/bindings/display/ssd1307fb.txt
+++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt
@@ -19,6 +19,7 @@ Optional properties:
- vbat-supply: The supply for VBAT
- solomon,segment-no-remap: Display needs normal (non-inverted) data column
to segment mapping
+ - solomon,col-offset: Offset of columns (SEG) that the screen is mapped to.
- solomon,com-seq: Display uses sequential COM pin configuration
- solomon,com-lrremap: Display uses left-right COM pin remap
- solomon,com-invdir: Display uses inverted COM pin scan direction
diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 8e06ba912d60..0241585bfbcc 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -74,6 +74,7 @@ struct ssd1307fb_par {
struct fb_info *info;
u8 lookup_table[4];
u32 page_offset;
+ u32 col_offset;
u32 prechargep1;
u32 prechargep2;
struct pwm_device *pwm;
@@ -458,11 +459,11 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, 0x0);
+ ret = ssd1307fb_write_cmd(par->client, par->col_offset);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, par->width - 1);
+ ret = ssd1307fb_write_cmd(par->client, par->col_offset + par->width - 1);
if (ret < 0)
return ret;
@@ -626,6 +627,9 @@ static int ssd1307fb_probe(struct i2c_client *client)
if (device_property_read_u32(dev, "solomon,page-offset", &par->page_offset))
par->page_offset = 1;
+ if (of_property_read_u32(node, "solomon,col-offset", &par->col_offset))
+ par->col_offset = 0;
+
if (device_property_read_u32(dev, "solomon,com-offset", &par->com_offset))
par->com_offset = 0;
--
2.23.0.rc1