On Mon, Sep 4 2023 at 09:33:33 PM +02:00:00, Krzysztof Kozlowski
<[email protected]> wrote:
> On 04/09/2023 17:57, Martin Botka wrote:
>> Add an Operating Performance Points table for the CPU cores to
>> enable Dynamic Voltage & Frequency Scaling on the H616.
>>
>
> ...
>
>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
>> b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
>> index 063db9634e5f..78e79c591dba 100644
>> --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
>> @@ -143,6 +143,10 @@ sid: efuse@3006000 {
>> ths_calibration: thermal-sensor-calibration@14 {
>> reg = <0x14 0x8>;
>> };
>> +
>> + cpu_speed_grade: cpu_speed_grade@0 {
>
> Underscores are no allowed in node names.
>
> It does not look like you tested the DTS against bindings. Please run
> `make dtbs_check W=1` (see
> Documentation/devicetree/bindings/writing-schema.rst or
> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
> for instructions).
I actually did. And did rerun it just now to check. No error or warning
was reported by dtbs_check W=1 for this.
But I will correct it in V2 and look if my setup is doing something
wrong that its not reporting these issues.
Cheers,
Martin
>
> Best regards,
> Krzysztof
>