From: Peng Fan <[email protected]>
V2:
Add dt-bindings
Merge dts changes into one patch, since all is to add mu node
Add mu dt bindings
Add mu node
Add i.MX8MP mu root clk
Peng Fan (3):
dt-bindings: mailbox: imx-mu: support i.MX8M
arm64: dts: imx8m: add mu node
clk: imx8mp: add mu root clk
Documentation/devicetree/bindings/mailbox/fsl,mu.txt | 3 ++-
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 9 +++++++++
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 9 +++++++++
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 9 +++++++++
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 9 +++++++++
drivers/clk/imx/clk-imx8mp.c | 1 +
6 files changed, 39 insertions(+), 1 deletion(-)
--
2.16.4
From: Peng Fan <[email protected]>
Add i.MX8MQ/M/N/P compatible string to support i.MX8M SoCs
Signed-off-by: Peng Fan <[email protected]>
---
Documentation/devicetree/bindings/mailbox/fsl,mu.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
index 26b7a88c2fea..906377acf2cd 100644
--- a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
@@ -18,7 +18,8 @@ Messaging Unit Device Node:
Required properties:
-------------------
- compatible : should be "fsl,<chip>-mu", the supported chips include
- imx6sx, imx7s, imx8qxp, imx8qm.
+ imx6sx, imx7s, imx8qxp, imx8qm, imx8mq, imx8mm, imx8mn,
+ imx8mp.
The "fsl,imx6sx-mu" compatible is seen as generic and should
be included together with SoC specific compatible.
There is a version 1.0 MU on imx7ulp, use "fsl,imx7ulp-mu"
--
2.16.4
From: Peng Fan <[email protected]>
Add mu node to let A53 could communicate with M Core.
Signed-off-by: Peng Fan <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 9 +++++++++
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 9 +++++++++
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 9 +++++++++
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 9 +++++++++
4 files changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index aaf6e71101a1..fc001fb971e9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -775,6 +775,15 @@
status = "disabled";
};
+ mu: mailbox@30aa0000 {
+ compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
+ reg = <0x30aa0000 0x10000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_MU_ROOT>;
+ clock-names = "mu";
+ #mbox-cells = <2>;
+ };
+
usdhc1: mmc@30b40000 {
compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 9a4b65a267d4..c8290d21ccc9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -675,6 +675,15 @@
status = "disabled";
};
+ mu: mailbox@30aa0000 {
+ compatible = "fsl,imx8mn-mu", "fsl,imx6sx-mu";
+ reg = <0x30aa0000 0x10000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_MU_ROOT>;
+ clock-names = "mu";
+ #mbox-cells = <2>;
+ };
+
usdhc1: mmc@30b40000 {
compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 45e2c0a4e889..b530804f763e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -621,6 +621,15 @@
status = "disabled";
};
+ mu: mailbox@30aa0000 {
+ compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
+ reg = <0x30aa0000 0x10000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_MU_ROOT>;
+ clock-names = "mu";
+ #mbox-cells = <2>;
+ };
+
i2c5: i2c@30ad0000 {
compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 978f8122c0d2..66ba8da704f6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -959,6 +959,15 @@
status = "disabled";
};
+ mu: mailbox@30aa0000 {
+ compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
+ reg = <0x30aa0000 0x10000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_MU_ROOT>;
+ clock-names = "mu";
+ #mbox-cells = <2>;
+ };
+
usdhc1: mmc@30b40000 {
compatible = "fsl,imx8mq-usdhc",
"fsl,imx7d-usdhc";
--
2.16.4
From: Peng Fan <[email protected]>
Add mu root clk for mu mailbox usage.
Signed-off-by: Peng Fan <[email protected]>
Reviewed-by: Dong Aisheng <[email protected]>
---
drivers/clk/imx/clk-imx8mp.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index b4d9db9d5bf1..ca747712400f 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -680,6 +680,7 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
hws[IMX8MP_CLK_I2C2_ROOT] = imx_clk_hw_gate4("i2c2_root_clk", "i2c2", ccm_base + 0x4180, 0);
hws[IMX8MP_CLK_I2C3_ROOT] = imx_clk_hw_gate4("i2c3_root_clk", "i2c3", ccm_base + 0x4190, 0);
hws[IMX8MP_CLK_I2C4_ROOT] = imx_clk_hw_gate4("i2c4_root_clk", "i2c4", ccm_base + 0x41a0, 0);
+ hws[IMX8MP_CLK_MU_ROOT] = imx_clk_hw_gate4("mu_root_clk", "ipg_root", ccm_base + 0x4210, 0);
hws[IMX8MP_CLK_OCOTP_ROOT] = imx_clk_hw_gate4("ocotp_root_clk", "ipg_root", ccm_base + 0x4220, 0);
hws[IMX8MP_CLK_PCIE_ROOT] = imx_clk_hw_gate4("pcie_root_clk", "pcie_aux", ccm_base + 0x4250, 0);
hws[IMX8MP_CLK_PWM1_ROOT] = imx_clk_hw_gate4("pwm1_root_clk", "pwm1", ccm_base + 0x4280, 0);
--
2.16.4
> From: Peng Fan <[email protected]>
> Sent: Monday, June 1, 2020 11:43 AM
>
> Add i.MX8MQ/M/N/P compatible string to support i.MX8M SoCs
>
> Signed-off-by: Peng Fan <[email protected]>
Reviewed-by: Dong Aisheng <[email protected]>
BTW, Anson,
will you continue to help convert MU binding into json schemas?
Regards
Aisheng
> From: Peng Fan <[email protected]>
> Sent: Monday, June 1, 2020 11:43 AM
>
> Add mu node to let A53 could communicate with M Core.
>
> Signed-off-by: Peng Fan <[email protected]>
> ---
> arch/arm64/boot/dts/freescale/imx8mm.dtsi | 9 +++++++++
> arch/arm64/boot/dts/freescale/imx8mn.dtsi | 9 +++++++++
> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 9 +++++++++
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 9 +++++++++
> 4 files changed, 36 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index aaf6e71101a1..fc001fb971e9 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -775,6 +775,15 @@
> status = "disabled";
> };
>
> + mu: mailbox@30aa0000 {
> + compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
> + reg = <0x30aa0000 0x10000>;
> + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_MU_ROOT>;
> + clock-names = "mu";
You missed my comments about this unneeded line in the last round of review.
https://lore.kernel.org/patchwork/patch/1244752/
Regards
Aisheng
> + #mbox-cells = <2>;
> + };
> +
> usdhc1: mmc@30b40000 {
> compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
> reg = <0x30b40000 0x10000>;
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> index 9a4b65a267d4..c8290d21ccc9 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> @@ -675,6 +675,15 @@
> status = "disabled";
> };
>
> + mu: mailbox@30aa0000 {
> + compatible = "fsl,imx8mn-mu", "fsl,imx6sx-mu";
> + reg = <0x30aa0000 0x10000>;
> + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MN_CLK_MU_ROOT>;
> + clock-names = "mu";
> + #mbox-cells = <2>;
> + };
> +
> usdhc1: mmc@30b40000 {
> compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
> reg = <0x30b40000 0x10000>;
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 45e2c0a4e889..b530804f763e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -621,6 +621,15 @@
> status = "disabled";
> };
>
> + mu: mailbox@30aa0000 {
> + compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
> + reg = <0x30aa0000 0x10000>;
> + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_MU_ROOT>;
> + clock-names = "mu";
> + #mbox-cells = <2>;
> + };
> +
> i2c5: i2c@30ad0000 {
> compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
> #address-cells = <1>;
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 978f8122c0d2..66ba8da704f6 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -959,6 +959,15 @@
> status = "disabled";
> };
>
> + mu: mailbox@30aa0000 {
> + compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
> + reg = <0x30aa0000 0x10000>;
> + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MQ_CLK_MU_ROOT>;
> + clock-names = "mu";
> + #mbox-cells = <2>;
> + };
> +
> usdhc1: mmc@30b40000 {
> compatible = "fsl,imx8mq-usdhc",
> "fsl,imx7d-usdhc";
> --
> 2.16.4
> Subject: RE: [PATCH V2 2/3] arm64: dts: imx8m: add mu node
>
> > From: Peng Fan <[email protected]>
> > Sent: Monday, June 1, 2020 11:43 AM
> >
> > Add mu node to let A53 could communicate with M Core.
> >
> > Signed-off-by: Peng Fan <[email protected]>
> > ---
> > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 9 +++++++++
> > arch/arm64/boot/dts/freescale/imx8mn.dtsi | 9 +++++++++
> > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 9 +++++++++
> > arch/arm64/boot/dts/freescale/imx8mq.dtsi | 9 +++++++++
> > 4 files changed, 36 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > index aaf6e71101a1..fc001fb971e9 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > @@ -775,6 +775,15 @@
> > status = "disabled";
> > };
> >
> > + mu: mailbox@30aa0000 {
> > + compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
> > + reg = <0x30aa0000 0x10000>;
> > + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clk IMX8MM_CLK_MU_ROOT>;
> > + clock-names = "mu";
>
> You missed my comments about this unneeded line in the last round of
> review.
> https://lore.kernel.org/patchwork/patch/1244752/
oops, will update in v3.
Thanks,
Peng.
>
> Regards
> Aisheng
>
> > + #mbox-cells = <2>;
> > + };
> > +
> > usdhc1: mmc@30b40000 {
> > compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
> > reg = <0x30b40000 0x10000>;
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> > index 9a4b65a267d4..c8290d21ccc9 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> > @@ -675,6 +675,15 @@
> > status = "disabled";
> > };
> >
> > + mu: mailbox@30aa0000 {
> > + compatible = "fsl,imx8mn-mu", "fsl,imx6sx-mu";
> > + reg = <0x30aa0000 0x10000>;
> > + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clk IMX8MN_CLK_MU_ROOT>;
> > + clock-names = "mu";
> > + #mbox-cells = <2>;
> > + };
> > +
> > usdhc1: mmc@30b40000 {
> > compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
> > reg = <0x30b40000 0x10000>;
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index 45e2c0a4e889..b530804f763e 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -621,6 +621,15 @@
> > status = "disabled";
> > };
> >
> > + mu: mailbox@30aa0000 {
> > + compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
> > + reg = <0x30aa0000 0x10000>;
> > + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clk IMX8MP_CLK_MU_ROOT>;
> > + clock-names = "mu";
> > + #mbox-cells = <2>;
> > + };
> > +
> > i2c5: i2c@30ad0000 {
> > compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
> > #address-cells = <1>;
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > index 978f8122c0d2..66ba8da704f6 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > @@ -959,6 +959,15 @@
> > status = "disabled";
> > };
> >
> > + mu: mailbox@30aa0000 {
> > + compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
> > + reg = <0x30aa0000 0x10000>;
> > + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clk IMX8MQ_CLK_MU_ROOT>;
> > + clock-names = "mu";
> > + #mbox-cells = <2>;
> > + };
> > +
> > usdhc1: mmc@30b40000 {
> > compatible = "fsl,imx8mq-usdhc",
> > "fsl,imx7d-usdhc";
> > --
> > 2.16.4
> Subject: RE: [PATCH V2 1/3] dt-bindings: mailbox: imx-mu: support i.MX8M
>
> > From: Peng Fan <[email protected]>
> > Sent: Monday, June 1, 2020 11:43 AM
> >
> > Add i.MX8MQ/M/N/P compatible string to support i.MX8M SoCs
> >
> > Signed-off-by: Peng Fan <[email protected]>
>
> Reviewed-by: Dong Aisheng <[email protected]>
>
> BTW, Anson,
> will you continue to help convert MU binding into json schemas?
Ok.