Convert the i.MX GPC binding to DT schema format using json-schema
From latest reference manual, there is actually ONLY 1 interrupt for
GPC, so the additional GPC interrupt is removed.
Consumer's example is also removed since it is NOT that useful.
Signed-off-by: Anson Huang <[email protected]>
---
.../devicetree/bindings/power/fsl,imx-gpc.txt | 91 ---------------
.../devicetree/bindings/power/fsl,imx-gpc.yaml | 124 +++++++++++++++++++++
2 files changed, 124 insertions(+), 91 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
create mode 100644 Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
deleted file mode 100644
index f0f5553..0000000
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-Freescale i.MX General Power Controller
-=======================================
-
-The i.MX6 General Power Control (GPC) block contains DVFS load tracking
-counters and Power Gating Control (PGC).
-
-Required properties:
-- compatible: Should be one of the following:
- - fsl,imx6q-gpc
- - fsl,imx6qp-gpc
- - fsl,imx6sl-gpc
- - fsl,imx6sx-gpc
-- reg: should be register base and length as documented in the
- datasheet
-- interrupts: Should contain one interrupt specifier for the GPC interrupt
-- clocks: Must contain an entry for each entry in clock-names.
- See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
- - ipg
-
-The power domains are generic power domain providers as documented in
-Documentation/devicetree/bindings/power/power-domain.yaml. They are described as
-subnodes of the power gating controller 'pgc' node of the GPC and should
-contain the following:
-
-Required properties:
-- reg: Must contain the DOMAIN_INDEX of this power domain
- The following DOMAIN_INDEX values are valid for i.MX6Q:
- ARM_DOMAIN 0
- PU_DOMAIN 1
- The following additional DOMAIN_INDEX value is valid for i.MX6SL:
- DISPLAY_DOMAIN 2
- The following additional DOMAIN_INDEX value is valid for i.MX6SX:
- PCI_DOMAIN 3
-
-- #power-domain-cells: Should be 0
-
-Optional properties:
-- clocks: a number of phandles to clocks that need to be enabled during domain
- power-up sequencing to ensure reset propagation into devices located inside
- this power domain
-- power-supply: a phandle to the regulator powering this domain
-
-Example:
-
- gpc: gpc@20dc000 {
- compatible = "fsl,imx6q-gpc";
- reg = <0x020dc000 0x4000>;
- interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
- <0 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6QDL_CLK_IPG>;
- clock-names = "ipg";
-
- pgc {
- #address-cells = <1>;
- #size-cells = <0>;
-
- power-domain@0 {
- reg = <0>;
- #power-domain-cells = <0>;
- };
-
- pd_pu: power-domain@1 {
- reg = <1>;
- #power-domain-cells = <0>;
- power-supply = <®_pu>;
- clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
- <&clks IMX6QDL_CLK_GPU3D_SHADER>,
- <&clks IMX6QDL_CLK_GPU2D_CORE>,
- <&clks IMX6QDL_CLK_GPU2D_AXI>,
- <&clks IMX6QDL_CLK_OPENVG_AXI>,
- <&clks IMX6QDL_CLK_VPU_AXI>;
- };
- };
- };
-
-
-Specifying power domain for IP modules
-======================================
-
-IP cores belonging to a power domain should contain a 'power-domains' property
-that is a phandle pointing to the power domain the device belongs to.
-
-Example of a device that is part of the PU power domain:
-
- vpu: vpu@2040000 {
- reg = <0x02040000 0x3c000>;
- /* ... */
- power-domains = <&pd_pu>;
- /* ... */
- };
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
new file mode 100644
index 0000000..a055b3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,imx-gpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Power Controller
+
+maintainers:
+ - Philipp Zabel <[email protected]>
+
+description: |
+ The i.MX6 General Power Control (GPC) block contains DVFS load tracking
+ counters and Power Gating Control (PGC).
+
+ The power domains are generic power domain providers as documented in
+ Documentation/devicetree/bindings/power/power-domain.yaml. They are
+ described as subnodes of the power gating controller 'pgc' node of the GPC.
+
+ IP cores belonging to a power domain should contain a 'power-domains'
+ property that is a phandle pointing to the power domain the device belongs
+ to.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx6q-gpc
+ - fsl,imx6qp-gpc
+ - fsl,imx6sl-gpc
+ - fsl,imx6sx-gpc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: ipg
+
+ pgc:
+ type: object
+ description: list of power domains provided by this controller.
+
+ patternProperties:
+ "power-domain@[0-9]$":
+ type: object
+ properties:
+
+ '#power-domain-cells':
+ const: 0
+
+ reg:
+ description: |
+ The following DOMAIN_INDEX values are valid for i.MX6Q:
+ ARM_DOMAIN 0
+ PU_DOMAIN 1
+ The following additional DOMAIN_INDEX value is valid for i.MX6SL:
+ DISPLAY_DOMAIN 2
+ The following additional DOMAIN_INDEX value is valid for i.MX6SX:
+ PCI_DOMAIN 3
+ maxItems: 1
+
+ clocks:
+ description: |
+ A number of phandles to clocks that need to be enabled during domain
+ power-up sequencing to ensure reset propagation into devices located
+ inside this power domain.
+ minItems: 1
+ maxItems: 7
+
+ power-supply: true
+
+ required:
+ - '#power-domain-cells'
+ - reg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - pgc
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ gpc@20dc000 {
+ compatible = "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_IPG>;
+ clock-names = "ipg";
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@0 {
+ reg = <0>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_pu: power-domain@1 {
+ reg = <1>;
+ #power-domain-cells = <0>;
+ power-supply = <®_pu>;
+ clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+ <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+ <&clks IMX6QDL_CLK_GPU2D_CORE>,
+ <&clks IMX6QDL_CLK_GPU2D_AXI>,
+ <&clks IMX6QDL_CLK_OPENVG_AXI>,
+ <&clks IMX6QDL_CLK_VPU_AXI>;
+ };
+ };
+ };
--
2.7.4
Convert the i.MX GPCv2 binding to DT schema format using json-schema
Example is updated based on latest DT file and consumer's example is
removed since it is NOT that useful.
Signed-off-by: Anson Huang <[email protected]>
---
.../devicetree/bindings/power/fsl,imx-gpcv2.txt | 77 ---------------
.../devicetree/bindings/power/fsl,imx-gpcv2.yaml | 108 +++++++++++++++++++++
2 files changed, 108 insertions(+), 77 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
create mode 100644 Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
deleted file mode 100644
index 6164920..0000000
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-Freescale i.MX General Power Controller v2
-==========================================
-
-The i.MX7S/D General Power Control (GPC) block contains Power Gating
-Control (PGC) for various power domains.
-
-Required properties:
-
-- compatible: Should be one of:
- - "fsl,imx7d-gpc"
- - "fsl,imx8mq-gpc"
-
-- reg: should be register base and length as documented in the
- datasheet
-
-- interrupts: Should contain GPC interrupt request 1
-
-Power domains contained within GPC node are generic power domain
-providers, documented in
-Documentation/devicetree/bindings/power/power-domain.yaml, which are
-described as subnodes of the power gating controller 'pgc' node,
-which, in turn, is expected to contain the following:
-
-Required properties:
-
-- reg: Power domain index. Valid values are defined in
- include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
- include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
-
-- #power-domain-cells: Should be 0
-
-Optional properties:
-
-- power-supply: Power supply used to power the domain
-- clocks: a number of phandles to clocks that need to be enabled during
- domain power-up sequencing to ensure reset propagation into devices
- located inside this power domain
-
-Example:
-
- gpc: gpc@303a0000 {
- compatible = "fsl,imx7d-gpc";
- reg = <0x303a0000 0x1000>;
- interrupt-controller;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- #interrupt-cells = <3>;
- interrupt-parent = <&intc>;
-
- pgc {
- #address-cells = <1>;
- #size-cells = <0>;
-
- pgc_pcie_phy: power-domain@1 {
- #power-domain-cells = <0>;
-
- reg = <1>;
- power-supply = <®_1p0d>;
- };
- };
- };
-
-
-Specifying power domain for IP modules
-======================================
-
-IP cores belonging to a power domain should contain a 'power-domains'
-property that is a phandle for PGC node representing the domain.
-
-Example of a device that is part of the PCIE_PHY power domain:
-
- pcie: pcie@33800000 {
- reg = <0x33800000 0x4000>,
- <0x4ff00000 0x80000>;
- /* ... */
- power-domains = <&pgc_pcie_phy>;
- /* ... */
- };
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
new file mode 100644
index 0000000..bde09a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,imx-gpcv2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Power Controller v2
+
+maintainers:
+ - Andrey Smirnov <[email protected]>
+
+description: |
+ The i.MX7S/D General Power Control (GPC) block contains Power Gating
+ Control (PGC) for various power domains.
+
+ Power domains contained within GPC node are generic power domain
+ providers, documented in
+ Documentation/devicetree/bindings/power/power-domain.yaml, which are
+ described as subnodes of the power gating controller 'pgc' node.
+
+ IP cores belonging to a power domain should contain a 'power-domains'
+ property that is a phandle for PGC node representing the domain.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx7d-gpc
+ - fsl,imx8mq-gpc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ pgc:
+ type: object
+ description: list of power domains provided by this controller.
+
+ patternProperties:
+ "power-domain@[0-9]$":
+ type: object
+ properties:
+
+ '#power-domain-cells':
+ const: 0
+
+ reg:
+ description: |
+ Power domain index. Valid values are defined in
+ include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
+ include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
+ maxItems: 1
+
+ clocks:
+ description: |
+ A number of phandles to clocks that need to be enabled during domain
+ power-up sequencing to ensure reset propagation into devices located
+ inside this power domain.
+ minItems: 1
+ maxItems: 5
+
+ power-supply: true
+
+ required:
+ - '#power-domain-cells'
+ - reg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - pgc
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ gpc@303a0000 {
+ compatible = "fsl,imx7d-gpc";
+ reg = <0x303a0000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pgc_mipi_phy: power-domain@0 {
+ #power-domain-cells = <0>;
+ reg = <0>;
+ power-supply = <®_1p0d>;
+ };
+
+ pgc_pcie_phy: power-domain@1 {
+ #power-domain-cells = <0>;
+ reg = <1>;
+ power-supply = <®_1p0d>;
+ };
+
+ pgc_hsic_phy: power-domain@2 {
+ #power-domain-cells = <0>;
+ reg = <2>;
+ power-supply = <®_1p2>;
+ };
+ };
+ };
--
2.7.4
On Mon, 01 Jun 2020 16:06:42 +0800, Anson Huang wrote:
> Convert the i.MX GPC binding to DT schema format using json-schema
>
> >From latest reference manual, there is actually ONLY 1 interrupt for
> GPC, so the additional GPC interrupt is removed.
>
> Consumer's example is also removed since it is NOT that useful.
>
> Signed-off-by: Anson Huang <[email protected]>
> ---
> .../devicetree/bindings/power/fsl,imx-gpc.txt | 91 ---------------
> .../devicetree/bindings/power/fsl,imx-gpc.yaml | 124 +++++++++++++++++++++
> 2 files changed, 124 insertions(+), 91 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
> create mode 100644 Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
>
Applied, thanks!
On Mon, 01 Jun 2020 16:06:43 +0800, Anson Huang wrote:
> Convert the i.MX GPCv2 binding to DT schema format using json-schema
>
> Example is updated based on latest DT file and consumer's example is
> removed since it is NOT that useful.
>
> Signed-off-by: Anson Huang <[email protected]>
> ---
> .../devicetree/bindings/power/fsl,imx-gpcv2.txt | 77 ---------------
> .../devicetree/bindings/power/fsl,imx-gpcv2.yaml | 108 +++++++++++++++++++++
> 2 files changed, 108 insertions(+), 77 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt
> create mode 100644 Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
>
Applied, thanks!