Add interconnect bandwidth scaling supported strings for qcom-sdhci
controller.
Signed-off-by: Pradeep P V K <[email protected]>
Acked-by: Rob Herring <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
---
Documentation/devicetree/bindings/mmc/sdhci-msm.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
index b8e1d2b..3b602fd 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -54,6 +54,21 @@ Required properties:
- qcom,dll-config: Chipset and Platform specific value. Use this field to
specify the DLL_CONFIG register value as per Hardware Programming Guide.
+Optional Properties:
+* Following bus parameters are required for interconnect bandwidth scaling:
+- interconnects: Pairs of phandles and interconnect provider specifier
+ to denote the edge source and destination ports of
+ the interconnect path.
+
+- interconnect-names: For sdhc, we have two main paths.
+ 1. Data path : sdhc to ddr
+ 2. Config path : cpu to sdhc
+ For Data interconnect path the name supposed to be
+ is "sdhc-ddr" and for config interconnect path it is
+ "cpu-sdhc".
+ Please refer to Documentation/devicetree/bindings/
+ interconnect/ for more details.
+
Example:
sdhc_1: sdhci@f9824900 {
@@ -71,6 +86,9 @@ Example:
clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
clock-names = "core", "iface";
+ interconnects = <&qnoc MASTER_SDCC_ID &qnoc SLAVE_DDR_ID>,
+ <&qnoc MASTER_CPU_ID &qnoc SLAVE_SDCC_ID>;
+ interconnect-names = "sdhc-ddr","cpu-sdhc";
qcom,dll-config = <0x000f642c>;
qcom,ddr-config = <0x80040868>;
--
1.9.1