There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
transfer to be send twice in DMA mode. Please get more information from:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
new sdma ram script which works in XCH mode as PIO inside sdma instead
of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should be
exist on all legacy i.mx6/7 soc family before i.mx6ul.
NXP fix this design issue from i.mx6ul, so newer chips including i.mx6ul/
6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8 chips
still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi'
for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need errata
or not.
The first two reverted patches should be the same issue, though, it
seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
have the chance to test this patch set if could fix their issues.
Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
on i.mx8mm because the event id is zero.
PS:
Please get sdma firmware from below linux-firmware and copy it to your
local rootfs /lib/firmware/imx/sdma.
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma
v2:
1.Add commit log for reverted patches.
2.Add comment for 'ecspi_fixed' in sdma driver.
3.Add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
rather than remove.
v3:
1.Confirm with design team make sure ERR009165 fixed on i.mx6ul/i.mx6ull
/i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy chips.
Correct dts related dts patch in v2.
2.Clean eratta information in binding doc and new 'tx_glitch_fixed' flag
in spi-imx driver to state ERR009165 fixed or not.
3.Enlarge burst size to fifo size for tx since tx_wml set to 0 in the
errata workaroud, thus improve performance as possible.
v4:
1.Add Ack tag from Mark and Vinod
2.Remove checking 'event_id1' zero as 'event_id0'.
v5:
1.Add the last patch for compatible with the current uart driver which
using rom script, so both uart ram script and rom script supported
in latest firmware, by default uart rom script used. UART driver
will be broken without this patch.
v6:
1.Resend after rebase the latest next branch.
2.Remove below No.13~No.15 patches of v5 because they were mergered.
ARM: dts: imx6ul: add dma support on ecspi
ARM: dts: imx6sll: correct sdma compatible
arm64: defconfig: Enable SDMA on i.mx8mq/8mm
3.Revert "dmaengine: imx-sdma: fix context cache" since
'context_loaded' removed.
v7:
1.Put the last patch 13/13 'Revert "dmaengine: imx-sdma: fix context
cache"' to the ahead of 03/13 'Revert "dmaengine: imx-sdma: refine
to load context only once" so that no building waring during comes out
during bisect.
2.Address Sascha's comments, including eliminating any i.mx6sx in this
series, adding new 'is_imx6ul_ecspi()' instead imx in imx51 and taking
care SMC bit for PIO.
3.Add back missing 'Reviewed-by' tag on 08/15(v5):09/13(v7)
'spi: imx: add new i.mx6ul compatible name in binding doc'
v8:
1.remove 0003-Revert-dmaengine-imx-sdma-fix-context-cache.patch and merge
it into 04/13 of v7
2.add 0005-spi-imx-fallback-to-PIO-if-dma-setup-failure.patch for no any
ecspi function broken even if sdma firmware not updated.
3.merge 'tx.dst_maxburst' changes in the two continous patches into one
patch to avoid confusion.
4.fix typo 'duplicated'.
v9:
1. add "spi: imx: add dma_sync_sg_for_device after fallback from dma"
to fix the potential issue brought by commit bcd8e7761ec9("spi: imx:
fallback to PIO if dma setup failure") which is the only one patch
of v8 merged. Thanks Matthias for reporting:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
Robin Gong (14):
Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
Revert "dmaengine: imx-sdma: refine to load context only once"
dmaengine: imx-sdma: remove duplicated sdma_load_context
spi: imx: fallback to PIO if dma setup failure
spi: imx: add dma_sync_sg_for_device after fallback from dma
dmaengine: imx-sdma: add mcu_2_ecspi script
spi: imx: fix ERR009165
spi: imx: remove ERR009165 workaround on i.mx6ul
spi: imx: add new i.mx6ul compatible name in binding doc
dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
dma: imx-sdma: add i.mx6ul compatible name
dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
dmaengine: imx-sdma: add uart rom script
.../devicetree/bindings/dma/fsl-imx-sdma.txt | 1 +
.../devicetree/bindings/spi/fsl-imx-cspi.txt | 1 +
arch/arm/boot/dts/imx6q.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl.dtsi | 8 +-
drivers/dma/imx-sdma.c | 67 ++++++++-----
drivers/spi/spi-imx.c | 104 ++++++++++++++++++---
include/linux/platform_data/dma-imx-sdma.h | 8 +-
7 files changed, 147 insertions(+), 44 deletions(-)
--
2.7.4
Because the number of ecspi1 rx event on i.mx8mm is 0, the condition
check ignore such special case without dma channel enabled, which caused
ecspi1 rx works failed. Actually, no need to check event_id0/event_id1
and replace checking 'event_id1' with 'DMA_DEV_TO_DEV', so that configure
event_id1 only in case DEV_TO_DEV.
Signed-off-by: Robin Gong <[email protected]>
Acked-by: Vinod Koul <[email protected]>
---
drivers/dma/imx-sdma.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index be86ae8..320104f 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1183,7 +1183,7 @@ static int sdma_config_channel(struct dma_chan *chan)
if ((sdmac->peripheral_type != IMX_DMATYPE_MEMORY) &&
(sdmac->peripheral_type != IMX_DMATYPE_DSP)) {
/* Handle multiple event channels differently */
- if (sdmac->event_id1) {
+ if (sdmac->direction == DMA_DEV_TO_DEV) {
if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP ||
sdmac->peripheral_type == IMX_DMATYPE_ASRC)
sdma_set_watermarklevel_for_p2p(sdmac);
@@ -1351,9 +1351,9 @@ static void sdma_free_chan_resources(struct dma_chan *chan)
sdma_channel_synchronize(chan);
- if (sdmac->event_id0 >= 0)
- sdma_event_disable(sdmac, sdmac->event_id0);
- if (sdmac->event_id1)
+ sdma_event_disable(sdmac, sdmac->event_id0);
+
+ if (sdmac->direction == DMA_DEV_TO_DEV)
sdma_event_disable(sdmac, sdmac->event_id1);
sdmac->event_id0 = 0;
@@ -1651,13 +1651,11 @@ static int sdma_config(struct dma_chan *chan,
memcpy(&sdmac->slave_config, dmaengine_cfg, sizeof(*dmaengine_cfg));
/* Set ENBLn earlier to make sure dma request triggered after that */
- if (sdmac->event_id0 >= 0) {
- if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
- return -EINVAL;
- sdma_event_enable(sdmac, sdmac->event_id0);
- }
+ if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
+ return -EINVAL;
+ sdma_event_enable(sdmac, sdmac->event_id0);
- if (sdmac->event_id1) {
+ if (sdmac->direction == DMA_DEV_TO_DEV) {
if (sdmac->event_id1 >= sdmac->sdma->drvdata->num_events)
return -EINVAL;
sdma_event_enable(sdmac, sdmac->event_id1);
--
2.7.4
Add i.mx6ul compatible name in binding doc.
Signed-off-by: Robin Gong <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index c9e9740..12c316f 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -9,6 +9,7 @@ Required properties:
"fsl,imx53-sdma"
"fsl,imx6q-sdma"
"fsl,imx7d-sdma"
+ "fsl,imx6ul-sdma"
"fsl,imx8mq-sdma"
"fsl,imx8mm-sdma"
"fsl,imx8mn-sdma"
--
2.7.4
Add mcu_2_ecspi script to fix ecspi errata ERR009165.
Signed-off-by: Robin Gong <[email protected]>
Acked-by: Vinod Koul <[email protected]>
---
drivers/dma/imx-sdma.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 4440ddb..db4132f 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -920,6 +920,9 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
emi_2_per = sdma->script_addrs->mcu_2_ata_addr;
break;
case IMX_DMATYPE_CSPI:
+ per_2_emi = sdma->script_addrs->app_2_mcu_addr;
+ emi_2_per = sdma->script_addrs->mcu_2_ecspi_addr;
+ break;
case IMX_DMATYPE_EXT:
case IMX_DMATYPE_SSI:
case IMX_DMATYPE_SAI:
--
2.7.4
For the compatibility of NXP internal legacy kernel before 4.19 which
is based on uart ram script and upstreaming kernel based on uart rom
script, add both uart ram/rom script in latest sdma firmware. By default
uart rom script used.
Besides, add two multi-fifo scripts for SAI/PDM on i.mx8m/8mm and add
back qspi script miss for v4(i.mx7d/8m/8mm family, but v3 is for i.mx6).
rom script:
uart_2_mcu_addr
uartsh_2_mcu_addr /* through spba bus */
am script:
uart_2_mcu_ram_addr
uartsh_2_mcu_ram_addr /* through spba bus */
Please get latest sdma firmware from the below and put them into the path
(/lib/firmware/imx/sdma/):
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
/tree/imx/sdma
Signed-off-by: Robin Gong <[email protected]>
Acked-by: Vinod Koul <[email protected]>
---
drivers/dma/imx-sdma.c | 4 ++--
include/linux/platform_data/dma-imx-sdma.h | 8 ++++++--
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 320104f..2ca7935 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1718,8 +1718,8 @@ static void sdma_issue_pending(struct dma_chan *chan)
#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34
#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2 38
-#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 41
-#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4 42
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 45
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4 46
static void sdma_add_scripts(struct sdma_engine *sdma,
const struct sdma_script_start_addrs *addr)
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
index 30e676b..e12d2e8 100644
--- a/include/linux/platform_data/dma-imx-sdma.h
+++ b/include/linux/platform_data/dma-imx-sdma.h
@@ -20,12 +20,12 @@ struct sdma_script_start_addrs {
s32 per_2_firi_addr;
s32 mcu_2_firi_addr;
s32 uart_2_per_addr;
- s32 uart_2_mcu_addr;
+ s32 uart_2_mcu_ram_addr;
s32 per_2_app_addr;
s32 mcu_2_app_addr;
s32 per_2_per_addr;
s32 uartsh_2_per_addr;
- s32 uartsh_2_mcu_addr;
+ s32 uartsh_2_mcu_ram_addr;
s32 per_2_shp_addr;
s32 mcu_2_shp_addr;
s32 ata_2_mcu_addr;
@@ -52,6 +52,10 @@ struct sdma_script_start_addrs {
s32 zcanfd_2_mcu_addr;
s32 zqspi_2_mcu_addr;
s32 mcu_2_ecspi_addr;
+ s32 mcu_2_sai_addr;
+ s32 sai_2_mcu_addr;
+ s32 uart_2_mcu_addr;
+ s32 uartsh_2_mcu_addr;
/* End of v3 array */
s32 mcu_2_zqspi_addr;
/* End of v4 array */
--
2.7.4