This patch series converts mxs/imx spi/cspi/lpspi binding to json-schema.
In fsl-imx-cspi.yaml, also update compatible, remove obsolete properties
"fsl,spi-num-chipselects" and update the example based on latest DT file;
In spi-fsl-lpspi.yaml, the original maintainer's email address [email protected]
is no longer valid, so I use mine.
Compared to V2, this patch series mainly removes redundant 'maxItems' in 'clocks'
and 'clock-names' property, also drop "clock-frequency" property's type.
Anson Huang (3):
dt-bindings: spi: Convert mxs spi to json-schema
dt-bindings: spi: Convert imx cspi to json-schema
dt-bindings: spi: Convert imx lpspi to json-schema
.../devicetree/bindings/spi/fsl-imx-cspi.txt | 56 -------------
.../devicetree/bindings/spi/fsl-imx-cspi.yaml | 97 ++++++++++++++++++++++
Documentation/devicetree/bindings/spi/mxs-spi.txt | 26 ------
Documentation/devicetree/bindings/spi/mxs-spi.yaml | 56 +++++++++++++
.../devicetree/bindings/spi/spi-fsl-lpspi.txt | 29 -------
.../devicetree/bindings/spi/spi-fsl-lpspi.yaml | 60 +++++++++++++
6 files changed, 213 insertions(+), 111 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
create mode 100644 Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
delete mode 100644 Documentation/devicetree/bindings/spi/mxs-spi.txt
create mode 100644 Documentation/devicetree/bindings/spi/mxs-spi.yaml
delete mode 100644 Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
create mode 100644 Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
--
2.7.4
Convert the MXS SPI binding to DT schema format using json-schema
Signed-off-by: Anson Huang <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
Changes since V2:
- drop "clock-frequency" property's type.
---
Documentation/devicetree/bindings/spi/mxs-spi.txt | 26 ----------
Documentation/devicetree/bindings/spi/mxs-spi.yaml | 56 ++++++++++++++++++++++
2 files changed, 56 insertions(+), 26 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spi/mxs-spi.txt
create mode 100644 Documentation/devicetree/bindings/spi/mxs-spi.yaml
diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt
deleted file mode 100644
index 3499b73..0000000
--- a/Documentation/devicetree/bindings/spi/mxs-spi.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Freescale MX233/MX28 SSP/SPI
-
-Required properties:
-- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
-- reg: Offset and length of the register set for the device
-- interrupts: Should contain SSP ERROR interrupt
-- dmas: DMA specifier, consisting of a phandle to DMA controller node
- and SSP DMA channel ID.
- Refer to dma.txt and fsl-mxs-dma.txt for details.
-- dma-names: Must be "rx-tx".
-
-Optional properties:
-- clock-frequency : Input clock frequency to the SPI block in Hz.
- Default is 160000000 Hz.
-
-Example:
-
-ssp0: ssp@80010000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx28-spi";
- reg = <0x80010000 0x2000>;
- interrupts = <96>;
- dmas = <&dma_apbh 0>;
- dma-names = "rx-tx";
-};
diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.yaml b/Documentation/devicetree/bindings/spi/mxs-spi.yaml
new file mode 100644
index 0000000..51f8c66
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mxs-spi.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mxs-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MX233/MX28 SSP/SPI
+
+maintainers:
+ - Marek Vasut <[email protected]>
+
+allOf:
+ - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx23-spi
+ - fsl,imx28-spi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rx-tx
+
+ clock-frequency:
+ description: input clock frequency to the SPI block in Hz.
+ default: 160000000
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - dmas
+ - dma-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi@80010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-spi";
+ reg = <0x80010000 0x2000>;
+ interrupts = <96>;
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
+ };
--
2.7.4
Convert the i.MX CSPI binding to DT schema format using json-schema,
update compatible, remove obsolete properties "fsl,spi-num-chipselects"
and update the example based on latest DT file.
Signed-off-by: Anson Huang <[email protected]>
---
Changes since V2:
- remove redundant "maxItems" in "clocks" and "clock-names".
---
.../devicetree/bindings/spi/fsl-imx-cspi.txt | 56 -------------
.../devicetree/bindings/spi/fsl-imx-cspi.yaml | 97 ++++++++++++++++++++++
2 files changed, 97 insertions(+), 56 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
create mode 100644 Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
deleted file mode 100644
index 33bc58f..0000000
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Freescale (Enhanced) Configurable Serial Peripheral Interface
- (CSPI/eCSPI) for i.MX
-
-Required properties:
-- compatible :
- - "fsl,imx1-cspi" for SPI compatible with the one integrated on i.MX1
- - "fsl,imx21-cspi" for SPI compatible with the one integrated on i.MX21
- - "fsl,imx27-cspi" for SPI compatible with the one integrated on i.MX27
- - "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31
- - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
- - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
- - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
- - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8MQ
- - "fsl,imx8mm-ecspi" for SPI compatible with the one integrated on i.MX8MM
- - "fsl,imx8mn-ecspi" for SPI compatible with the one integrated on i.MX8MN
- - "fsl,imx8mp-ecspi" for SPI compatible with the one integrated on i.MX8MP
-- reg : Offset and length of the register set for the device
-- interrupts : Should contain CSPI/eCSPI interrupt
-- clocks : Clock specifiers for both ipg and per clocks.
-- clock-names : Clock names should include both "ipg" and "per"
-See the clock consumer binding,
- Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Recommended properties:
-- cs-gpios : GPIOs to use as chip selects, see spi-bus.txt. While the native chip
-select lines can be used, they appear to always generate a pulse between each
-word of a transfer. Most use cases will require GPIO based chip selects to
-generate a valid transaction.
-
-Optional properties:
-- num-cs : Number of total chip selects, see spi-bus.txt.
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-Documentation/devicetree/bindings/dma/dma.txt.
-- dma-names: DMA request names, if present, should include "tx" and "rx".
-- fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register
-controlling the SPI_READY handling. Note that to enable the DRCTL consideration,
-the SPI_READY mode-flag needs to be set too.
-Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
-
-Obsolete properties:
-- fsl,spi-num-chipselects : Contains the number of the chipselect
-
-Example:
-
-ecspi@70010000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx51-ecspi";
- reg = <0x70010000 0x4000>;
- interrupts = <36>;
- cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */
- <&gpio3 25 0>; /* GPIO3_25 */
- dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
- dma-names = "rx", "tx";
- fsl,spi-rdy-drctl = <1>;
-};
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
new file mode 100644
index 0000000..6e44c9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/fsl-imx-cspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale (Enhanced) Configurable Serial Peripheral Interface (CSPI/eCSPI) for i.MX
+
+maintainers:
+ - Shawn Guo <[email protected]>
+
+allOf:
+ - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - const: fsl,imx1-cspi
+ - const: fsl,imx21-cspi
+ - const: fsl,imx27-cspi
+ - const: fsl,imx31-cspi
+ - const: fsl,imx35-cspi
+ - const: fsl,imx51-ecspi
+ - const: fsl,imx53-ecspi
+ - items:
+ - enum:
+ - fsl,imx50-ecspi
+ - fsl,imx6q-ecspi
+ - fsl,imx6sx-ecspi
+ - fsl,imx6sl-ecspi
+ - fsl,imx6sll-ecspi
+ - fsl,imx6ul-ecspi
+ - fsl,imx7d-ecspi
+ - fsl,imx8mq-ecspi
+ - fsl,imx8mm-ecspi
+ - fsl,imx8mn-ecspi
+ - fsl,imx8mp-ecspi
+ - const: fsl,imx51-ecspi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: SoC SPI ipg clock
+ - description: SoC SPI per clock
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: per
+
+ dmas:
+ items:
+ - description: DMA controller phandle and request line for RX
+ - description: DMA controller phandle and request line for TX
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+ fsl,spi-rdy-drctl:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Integer, representing the value of DRCTL, the register controlling
+ the SPI_READY handling. Note that to enable the DRCTL consideration,
+ the SPI_READY mode-flag needs to be set too.
+ Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
+ enum: [0, 1, 2]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx5-clock.h>
+
+ spi@70010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-ecspi";
+ reg = <0x70010000 0x4000>;
+ interrupts = <36>;
+ clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+ clock-names = "ipg", "per";
+ };
--
2.7.4
Convert the i.MX LPSPI binding to DT schema format using json-schema
Signed-off-by: Anson Huang <[email protected]>
---
Changes since V2:
- remove redundant "maxItems" in "clocks" and "clock-names".
---
.../devicetree/bindings/spi/spi-fsl-lpspi.txt | 29 -----------
.../devicetree/bindings/spi/spi-fsl-lpspi.yaml | 60 ++++++++++++++++++++++
2 files changed, 60 insertions(+), 29 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
create mode 100644 Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
deleted file mode 100644
index e71b81a..0000000
--- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Freescale Low Power SPI (LPSPI) for i.MX
-
-Required properties:
-- compatible :
- - "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc
- - "fsl,imx8qxp-spi" for LPSPI compatible with the one integrated on i.MX8QXP soc
-- reg : address and length of the lpspi master registers
-- interrupt-parent : core interrupt controller
-- interrupts : lpspi interrupt
-- clocks : lpspi clock specifier. Its number and order need to correspond to the
- value in clock-names.
-- clock-names : Corresponding to per clock and ipg clock in "clocks"
- respectively. In i.MX7ULP, it only has per clk, so use CLK_DUMMY
- to fill the "ipg" blank.
-- spi-slave : spi slave mode support. In slave mode, add this attribute without
- value. In master mode, remove it.
-
-Examples:
-
-lpspi2: lpspi@40290000 {
- compatible = "fsl,imx7ulp-spi";
- reg = <0x40290000 0x10000>;
- interrupt-parent = <&intc>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7ULP_CLK_LPSPI2>,
- <&clks IMX7ULP_CLK_DUMMY>;
- clock-names = "per", "ipg";
- spi-slave;
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
new file mode 100644
index 0000000..143b94a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-fsl-lpspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Low Power SPI (LPSPI) for i.MX
+
+maintainers:
+ - Anson Huang <[email protected]>
+
+allOf:
+ - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx7ulp-spi
+ - fsl,imx8qxp-spi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: SoC SPI per clock
+ - description: SoC SPI ipg clock
+
+ clock-names:
+ items:
+ - const: per
+ - const: ipg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx7ulp-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ spi@40290000 {
+ compatible = "fsl,imx7ulp-spi";
+ reg = <0x40290000 0x10000>;
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7ULP_CLK_LPSPI2>,
+ <&clks IMX7ULP_CLK_DUMMY>;
+ clock-names = "per", "ipg";
+ spi-slave;
+ };
--
2.7.4
On Tue, 16 Jun 2020 12:26:15 +0800, Anson Huang wrote:
> Convert the i.MX LPSPI binding to DT schema format using json-schema
>
> Signed-off-by: Anson Huang <[email protected]>
> ---
> Changes since V2:
> - remove redundant "maxItems" in "clocks" and "clock-names".
> ---
> .../devicetree/bindings/spi/spi-fsl-lpspi.txt | 29 -----------
> .../devicetree/bindings/spi/spi-fsl-lpspi.yaml | 60 ++++++++++++++++++++++
> 2 files changed, 60 insertions(+), 29 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
> create mode 100644 Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
>
Reviewed-by: Rob Herring <[email protected]>
On Tue, 16 Jun 2020 12:26:14 +0800, Anson Huang wrote:
> Convert the i.MX CSPI binding to DT schema format using json-schema,
> update compatible, remove obsolete properties "fsl,spi-num-chipselects"
> and update the example based on latest DT file.
>
> Signed-off-by: Anson Huang <[email protected]>
> ---
> Changes since V2:
> - remove redundant "maxItems" in "clocks" and "clock-names".
> ---
> .../devicetree/bindings/spi/fsl-imx-cspi.txt | 56 -------------
> .../devicetree/bindings/spi/fsl-imx-cspi.yaml | 97 ++++++++++++++++++++++
> 2 files changed, 97 insertions(+), 56 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> create mode 100644 Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
>
Reviewed-by: Rob Herring <[email protected]>
On Tue, 16 Jun 2020 12:26:12 +0800, Anson Huang wrote:
> This patch series converts mxs/imx spi/cspi/lpspi binding to json-schema.
>
> In fsl-imx-cspi.yaml, also update compatible, remove obsolete properties
> "fsl,spi-num-chipselects" and update the example based on latest DT file;
>
> In spi-fsl-lpspi.yaml, the original maintainer's email address [email protected]
> is no longer valid, so I use mine.
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[1/3] dt-bindings: spi: Convert mxs spi to json-schema
commit: e013bf2d96528c382f232a6ee068990d63e81a3d
[2/3] dt-bindings: spi: Convert imx cspi to json-schema
commit: 790739c4417c17b2201bc742a9d5d819ea71799f
[3/3] dt-bindings: spi: Convert imx lpspi to json-schema
commit: be8faebc2e55b2e5a335b606d11d070d53e78133
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark