2020-06-17 11:44:03

by Srinivas Neeli

[permalink] [raw]
Subject: [PATCH V4 0/7] gpio: zynq: Update on gpio-zynq driver

This patch series does the following:
-protect direction in/out with a spinlock
-Add binding for Versal gpio
-Add binding for pmc gpio node
-Add Versal support
-Disable the irq if it is not a wakeup source
-Add pmc gpio support
-Remove error prints in EPROBE_DEFER

---
Changes in V2:
- In previous series [PATCH 1/8] already applied on "linux-next".
- Fixed checkpatch warning for spinlock description.
- Added description for Versal PS_GPIO and PMC_GPIO.
Changes in V3:
- Updated commit description for PATCH 4 and 6.
Changes in V4:
- Updated commit description for PATCH 2 and 3.
---

Glenn Langedock (1):
gpio: zynq: protect direction in/out with a spinlock

Shubhrajyoti Datta (6):
dt-bindings: gpio: Add binding for Versal gpio
devicetree-binding: Add pmc gpio node
gpio: zynq: Add Versal support
gpio: zynq: Disable the irq if it is not a wakeup source
gpio: zynq: Add pmc gpio support
gpio: zynq: Remove error prints in EPROBE_DEFER

.../devicetree/bindings/gpio/gpio-zynq.txt | 4 +-
drivers/gpio/gpio-zynq.c | 66 +++++++++++++++++++++-
2 files changed, 67 insertions(+), 3 deletions(-)

--
2.7.4


2020-06-24 10:19:32

by Bartosz Golaszewski

[permalink] [raw]
Subject: Re: [PATCH V4 0/7] gpio: zynq: Update on gpio-zynq driver

śr., 17 cze 2020 o 13:37 Srinivas Neeli <[email protected]> napisał(a):
>
> This patch series does the following:
> -protect direction in/out with a spinlock
> -Add binding for Versal gpio
> -Add binding for pmc gpio node
> -Add Versal support
> -Disable the irq if it is not a wakeup source
> -Add pmc gpio support
> -Remove error prints in EPROBE_DEFER
>
> ---
> Changes in V2:
> - In previous series [PATCH 1/8] already applied on "linux-next".
> - Fixed checkpatch warning for spinlock description.
> - Added description for Versal PS_GPIO and PMC_GPIO.
> Changes in V3:
> - Updated commit description for PATCH 4 and 6.
> Changes in V4:
> - Updated commit description for PATCH 2 and 3.
> ---
>
> Glenn Langedock (1):
> gpio: zynq: protect direction in/out with a spinlock
>
> Shubhrajyoti Datta (6):
> dt-bindings: gpio: Add binding for Versal gpio
> devicetree-binding: Add pmc gpio node
> gpio: zynq: Add Versal support
> gpio: zynq: Disable the irq if it is not a wakeup source
> gpio: zynq: Add pmc gpio support
> gpio: zynq: Remove error prints in EPROBE_DEFER
>
> .../devicetree/bindings/gpio/gpio-zynq.txt | 4 +-
> drivers/gpio/gpio-zynq.c | 66 +++++++++++++++++++++-
> 2 files changed, 67 insertions(+), 3 deletions(-)
>
> --
> 2.7.4
>

Series applied to for-next.

Bart