From: Shubhrajyoti Datta <[email protected]>
Add the pmc gpio node to the device tree.
Versal devices are the industry's first adaptive compute
acceleration platforms.
https://www.xilinx.com/support/documentation/data_sheets/ds950-versal-overview.pdf
On the Versal platform, we are using two customized GPIO controllers(IP)
which were used in Zynq/ZynqMp platform.
One of them present in the Platform Management Controller(PMC) block and
other in Processing System(PS) block.
In PMC_GPIO only Bank0,1,3 & 4 are enabled and in PS_GPIO only
Bank 0 & 3 are enabled.
You can find more details of GPIO IP in ZynqMP TRM General Purpose
I/O(Chapter-27).
https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf
Signed-off-by: Shubhrajyoti Datta <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
---
Documentation/devicetree/bindings/gpio/gpio-zynq.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
index 4806d846c0fc..f693e82b4c0f 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt
@@ -8,6 +8,7 @@ Required properties:
parameters (unused)
- compatible : Should be "xlnx,zynq-gpio-1.0" or
"xlnx,zynqmp-gpio-1.0" or "xlnx,versal-gpio-1.0
+ or "xlnx,pmc-gpio-1.0
- clocks : Clock specifier (see clock bindings for details)
- gpio-controller : Marks the device node as a GPIO controller.
- interrupts : Interrupt specifier (see interrupt bindings for
--
2.7.4
śr., 17 cze 2020 o 13:37 Srinivas Neeli <[email protected]> napisał(a):
>
> From: Shubhrajyoti Datta <[email protected]>
>
> Add the pmc gpio node to the device tree.
>
> Versal devices are the industry's first adaptive compute
> acceleration platforms.
> https://www.xilinx.com/support/documentation/data_sheets/ds950-versal-overview.pdf
>
> On the Versal platform, we are using two customized GPIO controllers(IP)
> which were used in Zynq/ZynqMp platform.
> One of them present in the Platform Management Controller(PMC) block and
> other in Processing System(PS) block.
>
> In PMC_GPIO only Bank0,1,3 & 4 are enabled and in PS_GPIO only
> Bank 0 & 3 are enabled.
>
> You can find more details of GPIO IP in ZynqMP TRM General Purpose
> I/O(Chapter-27).
> https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf
>
> Signed-off-by: Shubhrajyoti Datta <[email protected]>
> Signed-off-by: Michal Simek <[email protected]>
I fixed up the subject - should have been "dt-bindings: gpio: ..."
Bartosz