2020-07-07 15:49:44

by Dennis-YC Hsieh

[permalink] [raw]
Subject: [PATCH v3 3/9] soc: mediatek: cmdq: add write_s_mask function

add write_s_mask function in cmdq helper functions which
writes value contains in internal register to address
with mask and large dma access support.

Signed-off-by: Dennis YC Hsieh <[email protected]>
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 23 +++++++++++++++++++++++
include/linux/mailbox/mtk-cmdq-mailbox.h | 1 +
include/linux/soc/mediatek/mtk-cmdq.h | 18 ++++++++++++++++++
3 files changed, 42 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 880349b3f16c..550e9e7e3ff2 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -242,6 +242,29 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
}
EXPORT_SYMBOL(cmdq_pkt_write_s);

+int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+ u16 addr_low, u16 src_reg_idx, u32 mask)
+{
+ struct cmdq_instruction inst = {};
+ int err;
+
+ inst.op = CMDQ_CODE_MASK;
+ inst.mask = ~mask;
+ err = cmdq_pkt_append_command(pkt, inst);
+ if (err < 0)
+ return err;
+
+ inst.mask = 0;
+ inst.op = CMDQ_CODE_WRITE_S_MASK;
+ inst.src_t = CMDQ_REG_TYPE;
+ inst.sop = high_addr_reg_idx;
+ inst.offset = addr_low;
+ inst.src_reg = src_reg_idx;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s_mask);
+
int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
{
struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 1f76cfedb16d..90d1d8e64412 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -61,6 +61,7 @@ enum cmdq_code {
CMDQ_CODE_WFE = 0x20,
CMDQ_CODE_EOC = 0x40,
CMDQ_CODE_WRITE_S = 0x90,
+ CMDQ_CODE_WRITE_S_MASK = 0x91,
CMDQ_CODE_LOGIC = 0xa0,
};

diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 9b0c57a0063d..53230341bf94 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -122,6 +122,24 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
u16 addr_low, u16 src_reg_idx);

/**
+ * cmdq_pkt_write_s_mask() - append write_s with mask command to the CMDQ packet
+ * @pkt: the CMDQ packet
+ * @high_addr_reg_idx: internal register ID which contains high address of pa
+ * @addr_low: low address of pa
+ * @src_reg_idx: the CMDQ internal register ID which cache source value
+ * @mask: the specified target address mask, use U32_MAX if no need
+ *
+ * Return: 0 for success; else the error code is returned
+ *
+ * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
+ * to get high address and call cmdq_pkt_assign() to assign value into internal
+ * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
+ * call to this function.
+ */
+int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+ u16 addr_low, u16 src_reg_idx, u32 mask);
+
+/**
* cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
* @pkt: the CMDQ packet
* @event: the desired event type to "wait and CLEAR"
--
1.7.9.5


2020-09-21 16:17:15

by Matthias Brugger

[permalink] [raw]
Subject: Re: [PATCH v3 3/9] soc: mediatek: cmdq: add write_s_mask function



On 07/07/2020 17:45, Dennis YC Hsieh wrote:
> add write_s_mask function in cmdq helper functions which
> writes value contains in internal register to address
> with mask and large dma access support.
>
> Signed-off-by: Dennis YC Hsieh <[email protected]>

Now pushed to v5.9-next/soc

Thanks!

> ---
> drivers/soc/mediatek/mtk-cmdq-helper.c | 23 +++++++++++++++++++++++
> include/linux/mailbox/mtk-cmdq-mailbox.h | 1 +
> include/linux/soc/mediatek/mtk-cmdq.h | 18 ++++++++++++++++++
> 3 files changed, 42 insertions(+)
>
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index 880349b3f16c..550e9e7e3ff2 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -242,6 +242,29 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> }
> EXPORT_SYMBOL(cmdq_pkt_write_s);
>
> +int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> + u16 addr_low, u16 src_reg_idx, u32 mask)
> +{
> + struct cmdq_instruction inst = {};
> + int err;
> +
> + inst.op = CMDQ_CODE_MASK;
> + inst.mask = ~mask;
> + err = cmdq_pkt_append_command(pkt, inst);
> + if (err < 0)
> + return err;
> +
> + inst.mask = 0;
> + inst.op = CMDQ_CODE_WRITE_S_MASK;
> + inst.src_t = CMDQ_REG_TYPE;
> + inst.sop = high_addr_reg_idx;
> + inst.offset = addr_low;
> + inst.src_reg = src_reg_idx;
> +
> + return cmdq_pkt_append_command(pkt, inst);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_write_s_mask);
> +
> int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
> {
> struct cmdq_instruction inst = { {0} };
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index 1f76cfedb16d..90d1d8e64412 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -61,6 +61,7 @@ enum cmdq_code {
> CMDQ_CODE_WFE = 0x20,
> CMDQ_CODE_EOC = 0x40,
> CMDQ_CODE_WRITE_S = 0x90,
> + CMDQ_CODE_WRITE_S_MASK = 0x91,
> CMDQ_CODE_LOGIC = 0xa0,
> };
>
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index 9b0c57a0063d..53230341bf94 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -122,6 +122,24 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> u16 addr_low, u16 src_reg_idx);
>
> /**
> + * cmdq_pkt_write_s_mask() - append write_s with mask command to the CMDQ packet
> + * @pkt: the CMDQ packet
> + * @high_addr_reg_idx: internal register ID which contains high address of pa
> + * @addr_low: low address of pa
> + * @src_reg_idx: the CMDQ internal register ID which cache source value
> + * @mask: the specified target address mask, use U32_MAX if no need
> + *
> + * Return: 0 for success; else the error code is returned
> + *
> + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
> + * to get high address and call cmdq_pkt_assign() to assign value into internal
> + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
> + * call to this function.
> + */
> +int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> + u16 addr_low, u16 src_reg_idx, u32 mask);
> +
> +/**
> * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> * @pkt: the CMDQ packet
> * @event: the desired event type to "wait and CLEAR"
>