2020-07-13 21:31:43

by Steve Wahl

[permalink] [raw]
Subject: [patch v3 02/13] x86: Remove support for UV1 platform from uv_tlb.c

arch/x86/platform/uv/uv_tlb.c: remove UV1 support
Include removing unused timeout_base_ns as reported by [email protected].

Signed-off-by: Steve Wahl <[email protected]>
Reported-by: kernel test robot <[email protected]>
---
arch/x86/platform/uv/tlb_uv.c | 237 +++++-------------------------------------
1 file changed, 31 insertions(+), 206 deletions(-)

--- linux.orig/arch/x86/platform/uv/tlb_uv.c 2020-07-07 10:49:50.481510115 -0500
+++ linux/arch/x86/platform/uv/tlb_uv.c 2020-07-07 10:56:13.665047592 -0500
@@ -23,18 +23,6 @@

static struct bau_operations ops __ro_after_init;

-/* timeouts in nanoseconds (indexed by UVH_AGING_PRESCALE_SEL urgency7 30:28) */
-static const int timeout_base_ns[] = {
- 20,
- 160,
- 1280,
- 10240,
- 81920,
- 655360,
- 5242880,
- 167772160
-};
-
static int timeout_us;
static bool nobau = true;
static int nobau_perm;
@@ -510,70 +498,6 @@ static inline void end_uvhub_quiesce(str
atom_asr(-1, (struct atomic_short *)&hmaster->uvhub_quiesce);
}

-static unsigned long uv1_read_status(unsigned long mmr_offset, int right_shift)
-{
- unsigned long descriptor_status;
-
- descriptor_status = uv_read_local_mmr(mmr_offset);
- descriptor_status >>= right_shift;
- descriptor_status &= UV_ACT_STATUS_MASK;
- return descriptor_status;
-}
-
-/*
- * Wait for completion of a broadcast software ack message
- * return COMPLETE, RETRY(PLUGGED or TIMEOUT) or GIVEUP
- */
-static int uv1_wait_completion(struct bau_desc *bau_desc,
- struct bau_control *bcp, long try)
-{
- unsigned long descriptor_status;
- cycles_t ttm;
- u64 mmr_offset = bcp->status_mmr;
- int right_shift = bcp->status_index;
- struct ptc_stats *stat = bcp->statp;
-
- descriptor_status = uv1_read_status(mmr_offset, right_shift);
- /* spin on the status MMR, waiting for it to go idle */
- while ((descriptor_status != DS_IDLE)) {
- /*
- * Our software ack messages may be blocked because
- * there are no swack resources available. As long
- * as none of them has timed out hardware will NACK
- * our message and its state will stay IDLE.
- */
- if (descriptor_status == DS_SOURCE_TIMEOUT) {
- stat->s_stimeout++;
- return FLUSH_GIVEUP;
- } else if (descriptor_status == DS_DESTINATION_TIMEOUT) {
- stat->s_dtimeout++;
- ttm = get_cycles();
-
- /*
- * Our retries may be blocked by all destination
- * swack resources being consumed, and a timeout
- * pending. In that case hardware returns the
- * ERROR that looks like a destination timeout.
- */
- if (cycles_2_us(ttm - bcp->send_message) < timeout_us) {
- bcp->conseccompletes = 0;
- return FLUSH_RETRY_PLUGGED;
- }
-
- bcp->conseccompletes = 0;
- return FLUSH_RETRY_TIMEOUT;
- } else {
- /*
- * descriptor_status is still BUSY
- */
- cpu_relax();
- }
- descriptor_status = uv1_read_status(mmr_offset, right_shift);
- }
- bcp->conseccompletes++;
- return FLUSH_COMPLETE;
-}
-
/*
* UV2 could have an extra bit of status in the ACTIVATION_STATUS_2 register.
* But not currently used.
@@ -853,24 +777,6 @@ static void record_send_stats(cycles_t t
}

/*
- * Because of a uv1 hardware bug only a limited number of concurrent
- * requests can be made.
- */
-static void uv1_throttle(struct bau_control *hmaster, struct ptc_stats *stat)
-{
- spinlock_t *lock = &hmaster->uvhub_lock;
- atomic_t *v;
-
- v = &hmaster->active_descriptor_count;
- if (!atomic_inc_unless_ge(lock, v, hmaster->max_concurr)) {
- stat->s_throttles++;
- do {
- cpu_relax();
- } while (!atomic_inc_unless_ge(lock, v, hmaster->max_concurr));
- }
-}
-
-/*
* Handle the completion status of a message send.
*/
static void handle_cmplt(int completion_status, struct bau_desc *bau_desc,
@@ -899,50 +805,30 @@ static int uv_flush_send_and_wait(struct
{
int seq_number = 0;
int completion_stat = 0;
- int uv1 = 0;
long try = 0;
unsigned long index;
cycles_t time1;
cycles_t time2;
struct ptc_stats *stat = bcp->statp;
struct bau_control *hmaster = bcp->uvhub_master;
- struct uv1_bau_msg_header *uv1_hdr = NULL;
struct uv2_3_bau_msg_header *uv2_3_hdr = NULL;

- if (bcp->uvhub_version == UV_BAU_V1) {
- uv1 = 1;
- uv1_throttle(hmaster, stat);
- }
-
while (hmaster->uvhub_quiesce)
cpu_relax();

time1 = get_cycles();
- if (uv1)
- uv1_hdr = &bau_desc->header.uv1_hdr;
- else
- /* uv2 and uv3 */
- uv2_3_hdr = &bau_desc->header.uv2_3_hdr;
+ uv2_3_hdr = &bau_desc->header.uv2_3_hdr;

do {
if (try == 0) {
- if (uv1)
- uv1_hdr->msg_type = MSG_REGULAR;
- else
- uv2_3_hdr->msg_type = MSG_REGULAR;
+ uv2_3_hdr->msg_type = MSG_REGULAR;
seq_number = bcp->message_number++;
} else {
- if (uv1)
- uv1_hdr->msg_type = MSG_RETRY;
- else
- uv2_3_hdr->msg_type = MSG_RETRY;
+ uv2_3_hdr->msg_type = MSG_RETRY;
stat->s_retry_messages++;
}

- if (uv1)
- uv1_hdr->sequence = seq_number;
- else
- uv2_3_hdr->sequence = seq_number;
+ uv2_3_hdr->sequence = seq_number;
index = (1UL << AS_PUSH_SHIFT) | bcp->uvhub_cpu;
bcp->send_message = get_cycles();

@@ -1162,7 +1048,6 @@ const struct cpumask *uv_flush_tlb_other
address = TLB_FLUSH_ALL;

switch (bcp->uvhub_version) {
- case UV_BAU_V1:
case UV_BAU_V2:
case UV_BAU_V3:
bau_desc->payload.uv1_2_3.address = address;
@@ -1300,7 +1185,7 @@ DEFINE_IDTENTRY_SYSVEC(sysvec_uv_bau_mes
if (bcp->uvhub_version == UV_BAU_V2)
process_uv2_message(&msgdesc, bcp);
else
- /* no error workaround for uv1 or uv3 */
+ /* no error workaround for uv3 */
bau_process_message(&msgdesc, bcp, 1);

msg++;
@@ -1350,12 +1235,7 @@ static void __init enable_timeouts(void)
mmr_image &= ~((unsigned long)0xf << SOFTACK_PSHIFT);
mmr_image |= (SOFTACK_TIMEOUT_PERIOD << SOFTACK_PSHIFT);
write_mmr_misc_control(pnode, mmr_image);
- /*
- * UV1:
- * Subsequent reversals of the timebase bit (3) cause an
- * immediate timeout of one or all INTD resources as
- * indicated in bits 2:0 (7 causes all of them to timeout).
- */
+
mmr_image |= (1L << SOFTACK_MSHIFT);
if (is_uv2_hub()) {
/* do not touch the legacy mode bit */
@@ -1711,14 +1591,12 @@ static void activation_descriptor_init(i
{
int i;
int cpu;
- int uv1 = 0;
unsigned long gpa;
unsigned long m;
unsigned long n;
size_t dsize;
struct bau_desc *bau_desc;
struct bau_desc *bd2;
- struct uv1_bau_msg_header *uv1_hdr;
struct uv2_3_bau_msg_header *uv2_3_hdr;
struct bau_control *bcp;

@@ -1733,8 +1611,6 @@ static void activation_descriptor_init(i
gpa = uv_gpa(bau_desc);
n = uv_gpa_to_gnode(gpa);
m = ops.bau_gpa_to_offset(gpa);
- if (is_uv1_hub())
- uv1 = 1;

/* the 14-bit pnode */
write_mmr_descriptor_base(pnode,
@@ -1746,37 +1622,15 @@ static void activation_descriptor_init(i
*/
for (i = 0, bd2 = bau_desc; i < (ADP_SZ * ITEMS_PER_DESC); i++, bd2++) {
memset(bd2, 0, sizeof(struct bau_desc));
- if (uv1) {
- uv1_hdr = &bd2->header.uv1_hdr;
- uv1_hdr->swack_flag = 1;
- /*
- * The base_dest_nasid set in the message header
- * is the nasid of the first uvhub in the partition.
- * The bit map will indicate destination pnode numbers
- * relative to that base. They may not be consecutive
- * if nasid striding is being used.
- */
- uv1_hdr->base_dest_nasid =
- UV_PNODE_TO_NASID(base_pnode);
- uv1_hdr->dest_subnodeid = UV_LB_SUBNODEID;
- uv1_hdr->command = UV_NET_ENDPOINT_INTD;
- uv1_hdr->int_both = 1;
- /*
- * all others need to be set to zero:
- * fairness chaining multilevel count replied_to
- */
- } else {
- /*
- * BIOS uses legacy mode, but uv2 and uv3 hardware always
- * uses native mode for selective broadcasts.
- */
- uv2_3_hdr = &bd2->header.uv2_3_hdr;
- uv2_3_hdr->swack_flag = 1;
- uv2_3_hdr->base_dest_nasid =
- UV_PNODE_TO_NASID(base_pnode);
- uv2_3_hdr->dest_subnodeid = UV_LB_SUBNODEID;
- uv2_3_hdr->command = UV_NET_ENDPOINT_INTD;
- }
+ /*
+ * BIOS uses legacy mode, but uv2 and uv3 hardware always
+ * uses native mode for selective broadcasts.
+ */
+ uv2_3_hdr = &bd2->header.uv2_3_hdr;
+ uv2_3_hdr->swack_flag = 1;
+ uv2_3_hdr->base_dest_nasid = UV_PNODE_TO_NASID(base_pnode);
+ uv2_3_hdr->dest_subnodeid = UV_LB_SUBNODEID;
+ uv2_3_hdr->command = UV_NET_ENDPOINT_INTD;
}
for_each_present_cpu(cpu) {
if (pnode != uv_blade_to_pnode(uv_cpu_to_blade_id(cpu)))
@@ -1861,7 +1715,7 @@ static void __init init_uvhub(int uvhub,
* The below initialization can't be in firmware because the
* messaging IRQ will be determined by the OS.
*/
- apicid = uvhub_to_first_apicid(uvhub) | uv_apicid_hibits;
+ apicid = uvhub_to_first_apicid(uvhub);
write_mmr_data_config(pnode, ((apicid << 32) | vector));
}

@@ -1874,33 +1728,20 @@ static int calculate_destination_timeout
{
unsigned long mmr_image;
int mult1;
- int mult2;
- int index;
int base;
int ret;
- unsigned long ts_ns;

- if (is_uv1_hub()) {
- mult1 = SOFTACK_TIMEOUT_PERIOD & BAU_MISC_CONTROL_MULT_MASK;
- mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL);
- index = (mmr_image >> BAU_URGENCY_7_SHIFT) & BAU_URGENCY_7_MASK;
- mmr_image = uv_read_local_mmr(UVH_TRANSACTION_TIMEOUT);
- mult2 = (mmr_image >> BAU_TRANS_SHIFT) & BAU_TRANS_MASK;
- ts_ns = timeout_base_ns[index];
- ts_ns *= (mult1 * mult2);
- ret = ts_ns / 1000;
- } else {
- /* same destination timeout for uv2 and uv3 */
- /* 4 bits 0/1 for 10/80us base, 3 bits of multiplier */
- mmr_image = uv_read_local_mmr(UVH_LB_BAU_MISC_CONTROL);
- mmr_image = (mmr_image & UV_SA_MASK) >> UV_SA_SHFT;
- if (mmr_image & (1L << UV2_ACK_UNITS_SHFT))
- base = 80;
- else
- base = 10;
- mult1 = mmr_image & UV2_ACK_MASK;
- ret = mult1 * base;
- }
+ /* same destination timeout for uv2 and uv3 */
+ /* 4 bits 0/1 for 10/80us base, 3 bits of multiplier */
+ mmr_image = uv_read_local_mmr(UVH_LB_BAU_MISC_CONTROL);
+ mmr_image = (mmr_image & UV_SA_MASK) >> UV_SA_SHFT;
+ if (mmr_image & (1L << UV2_ACK_UNITS_SHFT))
+ base = 80;
+ else
+ base = 10;
+ mult1 = mmr_image & UV2_ACK_MASK;
+ ret = mult1 * base;
+
return ret;
}

@@ -2039,9 +1880,7 @@ static int scan_sock(struct socket_desc
bcp->cpus_in_socket = sdp->num_cpus;
bcp->socket_master = *smasterp;
bcp->uvhub = bdp->uvhub;
- if (is_uv1_hub())
- bcp->uvhub_version = UV_BAU_V1;
- else if (is_uv2_hub())
+ if (is_uv2_hub())
bcp->uvhub_version = UV_BAU_V2;
else if (is_uv3_hub())
bcp->uvhub_version = UV_BAU_V3;
@@ -2123,7 +1962,7 @@ static int __init init_per_cpu(int nuvhu
struct uvhub_desc *uvhub_descs;
unsigned char *uvhub_mask = NULL;

- if (is_uv3_hub() || is_uv2_hub() || is_uv1_hub())
+ if (is_uv3_hub() || is_uv2_hub())
timeout_us = calculate_destination_timeout();

uvhub_descs = kcalloc(nuvhubs, sizeof(struct uvhub_desc), GFP_KERNEL);
@@ -2151,17 +1990,6 @@ fail:
return 1;
}

-static const struct bau_operations uv1_bau_ops __initconst = {
- .bau_gpa_to_offset = uv_gpa_to_offset,
- .read_l_sw_ack = read_mmr_sw_ack,
- .read_g_sw_ack = read_gmmr_sw_ack,
- .write_l_sw_ack = write_mmr_sw_ack,
- .write_g_sw_ack = write_gmmr_sw_ack,
- .write_payload_first = write_mmr_payload_first,
- .write_payload_last = write_mmr_payload_last,
- .wait_completion = uv1_wait_completion,
-};
-
static const struct bau_operations uv2_3_bau_ops __initconst = {
.bau_gpa_to_offset = uv_gpa_to_offset,
.read_l_sw_ack = read_mmr_sw_ack,
@@ -2206,8 +2034,6 @@ static int __init uv_bau_init(void)
ops = uv2_3_bau_ops;
else if (is_uv2_hub())
ops = uv2_3_bau_ops;
- else if (is_uv1_hub())
- ops = uv1_bau_ops;

nuvhubs = uv_num_possible_blades();
if (nuvhubs < 2) {
@@ -2228,7 +2054,7 @@ static int __init uv_bau_init(void)
}

/* software timeouts are not supported on UV4 */
- if (is_uv3_hub() || is_uv2_hub() || is_uv1_hub())
+ if (is_uv3_hub() || is_uv2_hub())
enable_timeouts();

if (init_per_cpu(nuvhubs, uv_base_pnode)) {
@@ -2251,8 +2077,7 @@ static int __init uv_bau_init(void)
val = 1L << 63;
write_gmmr_activation(pnode, val);
mmr = 1; /* should be 1 to broadcast to both sockets */
- if (!is_uv1_hub())
- write_mmr_data_broadcast(pnode, mmr);
+ write_mmr_data_broadcast(pnode, mmr);
}
}



Subject: [tip: x86/platform] x86/platform/uv: Remove support for UV1 platform from uv_tlb

The following commit has been merged into the x86/platform branch of tip:

Commit-ID: 95328de5fc2d0b68555c200da889f5d8889a0f13
Gitweb: https://git.kernel.org/tip/95328de5fc2d0b68555c200da889f5d8889a0f13
Author: [email protected] <[email protected]>
AuthorDate: Mon, 13 Jul 2020 16:29:56 -05:00
Committer: Thomas Gleixner <[email protected]>
CommitterDate: Fri, 17 Jul 2020 16:47:44 +02:00

x86/platform/uv: Remove support for UV1 platform from uv_tlb

UV1 is not longer supported.

Signed-off-by: Steve Wahl <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
---
arch/x86/platform/uv/tlb_uv.c | 239 ++++-----------------------------
1 file changed, 32 insertions(+), 207 deletions(-)

diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 0ac96ca..395073d 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -23,18 +23,6 @@

static struct bau_operations ops __ro_after_init;

-/* timeouts in nanoseconds (indexed by UVH_AGING_PRESCALE_SEL urgency7 30:28) */
-static const int timeout_base_ns[] = {
- 20,
- 160,
- 1280,
- 10240,
- 81920,
- 655360,
- 5242880,
- 167772160
-};
-
static int timeout_us;
static bool nobau = true;
static int nobau_perm;
@@ -510,70 +498,6 @@ static inline void end_uvhub_quiesce(struct bau_control *hmaster)
atom_asr(-1, (struct atomic_short *)&hmaster->uvhub_quiesce);
}

-static unsigned long uv1_read_status(unsigned long mmr_offset, int right_shift)
-{
- unsigned long descriptor_status;
-
- descriptor_status = uv_read_local_mmr(mmr_offset);
- descriptor_status >>= right_shift;
- descriptor_status &= UV_ACT_STATUS_MASK;
- return descriptor_status;
-}
-
-/*
- * Wait for completion of a broadcast software ack message
- * return COMPLETE, RETRY(PLUGGED or TIMEOUT) or GIVEUP
- */
-static int uv1_wait_completion(struct bau_desc *bau_desc,
- struct bau_control *bcp, long try)
-{
- unsigned long descriptor_status;
- cycles_t ttm;
- u64 mmr_offset = bcp->status_mmr;
- int right_shift = bcp->status_index;
- struct ptc_stats *stat = bcp->statp;
-
- descriptor_status = uv1_read_status(mmr_offset, right_shift);
- /* spin on the status MMR, waiting for it to go idle */
- while ((descriptor_status != DS_IDLE)) {
- /*
- * Our software ack messages may be blocked because
- * there are no swack resources available. As long
- * as none of them has timed out hardware will NACK
- * our message and its state will stay IDLE.
- */
- if (descriptor_status == DS_SOURCE_TIMEOUT) {
- stat->s_stimeout++;
- return FLUSH_GIVEUP;
- } else if (descriptor_status == DS_DESTINATION_TIMEOUT) {
- stat->s_dtimeout++;
- ttm = get_cycles();
-
- /*
- * Our retries may be blocked by all destination
- * swack resources being consumed, and a timeout
- * pending. In that case hardware returns the
- * ERROR that looks like a destination timeout.
- */
- if (cycles_2_us(ttm - bcp->send_message) < timeout_us) {
- bcp->conseccompletes = 0;
- return FLUSH_RETRY_PLUGGED;
- }
-
- bcp->conseccompletes = 0;
- return FLUSH_RETRY_TIMEOUT;
- } else {
- /*
- * descriptor_status is still BUSY
- */
- cpu_relax();
- }
- descriptor_status = uv1_read_status(mmr_offset, right_shift);
- }
- bcp->conseccompletes++;
- return FLUSH_COMPLETE;
-}
-
/*
* UV2 could have an extra bit of status in the ACTIVATION_STATUS_2 register.
* But not currently used.
@@ -853,24 +777,6 @@ static void record_send_stats(cycles_t time1, cycles_t time2,
}

/*
- * Because of a uv1 hardware bug only a limited number of concurrent
- * requests can be made.
- */
-static void uv1_throttle(struct bau_control *hmaster, struct ptc_stats *stat)
-{
- spinlock_t *lock = &hmaster->uvhub_lock;
- atomic_t *v;
-
- v = &hmaster->active_descriptor_count;
- if (!atomic_inc_unless_ge(lock, v, hmaster->max_concurr)) {
- stat->s_throttles++;
- do {
- cpu_relax();
- } while (!atomic_inc_unless_ge(lock, v, hmaster->max_concurr));
- }
-}
-
-/*
* Handle the completion status of a message send.
*/
static void handle_cmplt(int completion_status, struct bau_desc *bau_desc,
@@ -899,50 +805,30 @@ static int uv_flush_send_and_wait(struct cpumask *flush_mask,
{
int seq_number = 0;
int completion_stat = 0;
- int uv1 = 0;
long try = 0;
unsigned long index;
cycles_t time1;
cycles_t time2;
struct ptc_stats *stat = bcp->statp;
struct bau_control *hmaster = bcp->uvhub_master;
- struct uv1_bau_msg_header *uv1_hdr = NULL;
struct uv2_3_bau_msg_header *uv2_3_hdr = NULL;

- if (bcp->uvhub_version == UV_BAU_V1) {
- uv1 = 1;
- uv1_throttle(hmaster, stat);
- }
-
while (hmaster->uvhub_quiesce)
cpu_relax();

time1 = get_cycles();
- if (uv1)
- uv1_hdr = &bau_desc->header.uv1_hdr;
- else
- /* uv2 and uv3 */
- uv2_3_hdr = &bau_desc->header.uv2_3_hdr;
+ uv2_3_hdr = &bau_desc->header.uv2_3_hdr;

do {
if (try == 0) {
- if (uv1)
- uv1_hdr->msg_type = MSG_REGULAR;
- else
- uv2_3_hdr->msg_type = MSG_REGULAR;
+ uv2_3_hdr->msg_type = MSG_REGULAR;
seq_number = bcp->message_number++;
} else {
- if (uv1)
- uv1_hdr->msg_type = MSG_RETRY;
- else
- uv2_3_hdr->msg_type = MSG_RETRY;
+ uv2_3_hdr->msg_type = MSG_RETRY;
stat->s_retry_messages++;
}

- if (uv1)
- uv1_hdr->sequence = seq_number;
- else
- uv2_3_hdr->sequence = seq_number;
+ uv2_3_hdr->sequence = seq_number;
index = (1UL << AS_PUSH_SHIFT) | bcp->uvhub_cpu;
bcp->send_message = get_cycles();

@@ -1162,7 +1048,6 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
address = TLB_FLUSH_ALL;

switch (bcp->uvhub_version) {
- case UV_BAU_V1:
case UV_BAU_V2:
case UV_BAU_V3:
bau_desc->payload.uv1_2_3.address = address;
@@ -1300,7 +1185,7 @@ DEFINE_IDTENTRY_SYSVEC(sysvec_uv_bau_message)
if (bcp->uvhub_version == UV_BAU_V2)
process_uv2_message(&msgdesc, bcp);
else
- /* no error workaround for uv1 or uv3 */
+ /* no error workaround for uv3 */
bau_process_message(&msgdesc, bcp, 1);

msg++;
@@ -1350,12 +1235,7 @@ static void __init enable_timeouts(void)
mmr_image &= ~((unsigned long)0xf << SOFTACK_PSHIFT);
mmr_image |= (SOFTACK_TIMEOUT_PERIOD << SOFTACK_PSHIFT);
write_mmr_misc_control(pnode, mmr_image);
- /*
- * UV1:
- * Subsequent reversals of the timebase bit (3) cause an
- * immediate timeout of one or all INTD resources as
- * indicated in bits 2:0 (7 causes all of them to timeout).
- */
+
mmr_image |= (1L << SOFTACK_MSHIFT);
if (is_uv2_hub()) {
/* do not touch the legacy mode bit */
@@ -1711,14 +1591,12 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode)
{
int i;
int cpu;
- int uv1 = 0;
unsigned long gpa;
unsigned long m;
unsigned long n;
size_t dsize;
struct bau_desc *bau_desc;
struct bau_desc *bd2;
- struct uv1_bau_msg_header *uv1_hdr;
struct uv2_3_bau_msg_header *uv2_3_hdr;
struct bau_control *bcp;

@@ -1733,8 +1611,6 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode)
gpa = uv_gpa(bau_desc);
n = uv_gpa_to_gnode(gpa);
m = ops.bau_gpa_to_offset(gpa);
- if (is_uv1_hub())
- uv1 = 1;

/* the 14-bit pnode */
write_mmr_descriptor_base(pnode,
@@ -1746,37 +1622,15 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode)
*/
for (i = 0, bd2 = bau_desc; i < (ADP_SZ * ITEMS_PER_DESC); i++, bd2++) {
memset(bd2, 0, sizeof(struct bau_desc));
- if (uv1) {
- uv1_hdr = &bd2->header.uv1_hdr;
- uv1_hdr->swack_flag = 1;
- /*
- * The base_dest_nasid set in the message header
- * is the nasid of the first uvhub in the partition.
- * The bit map will indicate destination pnode numbers
- * relative to that base. They may not be consecutive
- * if nasid striding is being used.
- */
- uv1_hdr->base_dest_nasid =
- UV_PNODE_TO_NASID(base_pnode);
- uv1_hdr->dest_subnodeid = UV_LB_SUBNODEID;
- uv1_hdr->command = UV_NET_ENDPOINT_INTD;
- uv1_hdr->int_both = 1;
- /*
- * all others need to be set to zero:
- * fairness chaining multilevel count replied_to
- */
- } else {
- /*
- * BIOS uses legacy mode, but uv2 and uv3 hardware always
- * uses native mode for selective broadcasts.
- */
- uv2_3_hdr = &bd2->header.uv2_3_hdr;
- uv2_3_hdr->swack_flag = 1;
- uv2_3_hdr->base_dest_nasid =
- UV_PNODE_TO_NASID(base_pnode);
- uv2_3_hdr->dest_subnodeid = UV_LB_SUBNODEID;
- uv2_3_hdr->command = UV_NET_ENDPOINT_INTD;
- }
+ /*
+ * BIOS uses legacy mode, but uv2 and uv3 hardware always
+ * uses native mode for selective broadcasts.
+ */
+ uv2_3_hdr = &bd2->header.uv2_3_hdr;
+ uv2_3_hdr->swack_flag = 1;
+ uv2_3_hdr->base_dest_nasid = UV_PNODE_TO_NASID(base_pnode);
+ uv2_3_hdr->dest_subnodeid = UV_LB_SUBNODEID;
+ uv2_3_hdr->command = UV_NET_ENDPOINT_INTD;
}
for_each_present_cpu(cpu) {
if (pnode != uv_blade_to_pnode(uv_cpu_to_blade_id(cpu)))
@@ -1861,7 +1715,7 @@ static void __init init_uvhub(int uvhub, int vector, int base_pnode)
* The below initialization can't be in firmware because the
* messaging IRQ will be determined by the OS.
*/
- apicid = uvhub_to_first_apicid(uvhub) | uv_apicid_hibits;
+ apicid = uvhub_to_first_apicid(uvhub);
write_mmr_data_config(pnode, ((apicid << 32) | vector));
}

@@ -1874,33 +1728,20 @@ static int calculate_destination_timeout(void)
{
unsigned long mmr_image;
int mult1;
- int mult2;
- int index;
int base;
int ret;
- unsigned long ts_ns;
-
- if (is_uv1_hub()) {
- mult1 = SOFTACK_TIMEOUT_PERIOD & BAU_MISC_CONTROL_MULT_MASK;
- mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL);
- index = (mmr_image >> BAU_URGENCY_7_SHIFT) & BAU_URGENCY_7_MASK;
- mmr_image = uv_read_local_mmr(UVH_TRANSACTION_TIMEOUT);
- mult2 = (mmr_image >> BAU_TRANS_SHIFT) & BAU_TRANS_MASK;
- ts_ns = timeout_base_ns[index];
- ts_ns *= (mult1 * mult2);
- ret = ts_ns / 1000;
- } else {
- /* same destination timeout for uv2 and uv3 */
- /* 4 bits 0/1 for 10/80us base, 3 bits of multiplier */
- mmr_image = uv_read_local_mmr(UVH_LB_BAU_MISC_CONTROL);
- mmr_image = (mmr_image & UV_SA_MASK) >> UV_SA_SHFT;
- if (mmr_image & (1L << UV2_ACK_UNITS_SHFT))
- base = 80;
- else
- base = 10;
- mult1 = mmr_image & UV2_ACK_MASK;
- ret = mult1 * base;
- }
+
+ /* same destination timeout for uv2 and uv3 */
+ /* 4 bits 0/1 for 10/80us base, 3 bits of multiplier */
+ mmr_image = uv_read_local_mmr(UVH_LB_BAU_MISC_CONTROL);
+ mmr_image = (mmr_image & UV_SA_MASK) >> UV_SA_SHFT;
+ if (mmr_image & (1L << UV2_ACK_UNITS_SHFT))
+ base = 80;
+ else
+ base = 10;
+ mult1 = mmr_image & UV2_ACK_MASK;
+ ret = mult1 * base;
+
return ret;
}

@@ -2039,9 +1880,7 @@ static int scan_sock(struct socket_desc *sdp, struct uvhub_desc *bdp,
bcp->cpus_in_socket = sdp->num_cpus;
bcp->socket_master = *smasterp;
bcp->uvhub = bdp->uvhub;
- if (is_uv1_hub())
- bcp->uvhub_version = UV_BAU_V1;
- else if (is_uv2_hub())
+ if (is_uv2_hub())
bcp->uvhub_version = UV_BAU_V2;
else if (is_uv3_hub())
bcp->uvhub_version = UV_BAU_V3;
@@ -2123,7 +1962,7 @@ static int __init init_per_cpu(int nuvhubs, int base_part_pnode)
struct uvhub_desc *uvhub_descs;
unsigned char *uvhub_mask = NULL;

- if (is_uv3_hub() || is_uv2_hub() || is_uv1_hub())
+ if (is_uv3_hub() || is_uv2_hub())
timeout_us = calculate_destination_timeout();

uvhub_descs = kcalloc(nuvhubs, sizeof(struct uvhub_desc), GFP_KERNEL);
@@ -2151,17 +1990,6 @@ fail:
return 1;
}

-static const struct bau_operations uv1_bau_ops __initconst = {
- .bau_gpa_to_offset = uv_gpa_to_offset,
- .read_l_sw_ack = read_mmr_sw_ack,
- .read_g_sw_ack = read_gmmr_sw_ack,
- .write_l_sw_ack = write_mmr_sw_ack,
- .write_g_sw_ack = write_gmmr_sw_ack,
- .write_payload_first = write_mmr_payload_first,
- .write_payload_last = write_mmr_payload_last,
- .wait_completion = uv1_wait_completion,
-};
-
static const struct bau_operations uv2_3_bau_ops __initconst = {
.bau_gpa_to_offset = uv_gpa_to_offset,
.read_l_sw_ack = read_mmr_sw_ack,
@@ -2206,8 +2034,6 @@ static int __init uv_bau_init(void)
ops = uv2_3_bau_ops;
else if (is_uv2_hub())
ops = uv2_3_bau_ops;
- else if (is_uv1_hub())
- ops = uv1_bau_ops;

nuvhubs = uv_num_possible_blades();
if (nuvhubs < 2) {
@@ -2228,7 +2054,7 @@ static int __init uv_bau_init(void)
}

/* software timeouts are not supported on UV4 */
- if (is_uv3_hub() || is_uv2_hub() || is_uv1_hub())
+ if (is_uv3_hub() || is_uv2_hub())
enable_timeouts();

if (init_per_cpu(nuvhubs, uv_base_pnode)) {
@@ -2251,8 +2077,7 @@ static int __init uv_bau_init(void)
val = 1L << 63;
write_gmmr_activation(pnode, val);
mmr = 1; /* should be 1 to broadcast to both sockets */
- if (!is_uv1_hub())
- write_mmr_data_broadcast(pnode, mmr);
+ write_mmr_data_broadcast(pnode, mmr);
}
}