One more regulator is required to turn on the external oscillator
populated on the iMX6QP SABRESD board.
Add another regulator to enable PCIe on iMX6QP SABRESD board.
Signed-off-by: Richard Zhu <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 8f08ae53f53e..9e1563601835 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -81,6 +81,7 @@ struct imx6_pcie {
u32 tx_swing_low;
int link_gen;
struct regulator *vpcie;
+ struct regulator *vepdev;
void __iomem *phy_base;
/* power domain for pcie */
@@ -507,6 +508,14 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
return;
}
}
+ if (imx6_pcie->vepdev && !regulator_is_enabled(imx6_pcie->vepdev)) {
+ ret = regulator_enable(imx6_pcie->vepdev);
+ if (ret) {
+ dev_err(dev, "failed to enable vepdev regulator: %d\n",
+ ret);
+ goto err_pcie_vepdev;
+ }
+ }
ret = clk_prepare_enable(imx6_pcie->pcie_phy);
if (ret) {
@@ -595,6 +604,13 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
err_pcie_bus:
clk_disable_unprepare(imx6_pcie->pcie_phy);
err_pcie_phy:
+ if (imx6_pcie->vepdev && regulator_is_enabled(imx6_pcie->vepdev) > 0) {
+ ret = regulator_disable(imx6_pcie->vepdev);
+ if (ret)
+ dev_err(dev, "failed to disable vepdev regulator: %d\n",
+ ret);
+ }
+err_pcie_vepdev:
if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
ret = regulator_disable(imx6_pcie->vpcie);
if (ret)
@@ -1178,6 +1194,12 @@ static int imx6_pcie_probe(struct platform_device *pdev)
return PTR_ERR(imx6_pcie->vpcie);
imx6_pcie->vpcie = NULL;
}
+ imx6_pcie->vepdev = devm_regulator_get_optional(&pdev->dev, "vepdev");
+ if (IS_ERR(imx6_pcie->vepdev)) {
+ if (PTR_ERR(imx6_pcie->vepdev) != -ENODEV)
+ return PTR_ERR(imx6_pcie->vepdev);
+ imx6_pcie->vepdev = NULL;
+ }
platform_set_drvdata(pdev, imx6_pcie);
--
2.17.1