Updated the reset driver to support Versal platform.
As part of adding Versal support
- Added Versal specific compatible string.
- Reset Id and number of resets are different for Versal and ZynqMP,
hence taken care of these two based on compatible string.
Signed-off-by: Sai Krishna Potthuri <[email protected]>
---
drivers/reset/reset-zynqmp.c | 50 +++++++++++++++++++++++++++++++-----
1 file changed, 44 insertions(+), 6 deletions(-)
diff --git a/drivers/reset/reset-zynqmp.c b/drivers/reset/reset-zynqmp.c
index 373ea8d4f7a1..ebd433fa09dd 100644
--- a/drivers/reset/reset-zynqmp.c
+++ b/drivers/reset/reset-zynqmp.c
@@ -9,12 +9,20 @@
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/firmware/xlnx-zynqmp.h>
+#include <linux/of_device.h>
#define ZYNQMP_NR_RESETS (ZYNQMP_PM_RESET_END - ZYNQMP_PM_RESET_START)
#define ZYNQMP_RESET_ID ZYNQMP_PM_RESET_START
+#define VERSAL_NR_RESETS 95
+
+struct zynqmp_reset_soc_data {
+ u32 reset_id;
+ u32 num_resets;
+};
struct zynqmp_reset_data {
struct reset_controller_dev rcdev;
+ const struct zynqmp_reset_soc_data *data;
};
static inline struct zynqmp_reset_data *
@@ -26,23 +34,28 @@ to_zynqmp_reset_data(struct reset_controller_dev *rcdev)
static int zynqmp_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
- return zynqmp_pm_reset_assert(ZYNQMP_RESET_ID + id,
+ struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+
+ return zynqmp_pm_reset_assert(priv->data->reset_id + id,
PM_RESET_ACTION_ASSERT);
}
static int zynqmp_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
- return zynqmp_pm_reset_assert(ZYNQMP_RESET_ID + id,
+ struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+
+ return zynqmp_pm_reset_assert(priv->data->reset_id + id,
PM_RESET_ACTION_RELEASE);
}
static int zynqmp_reset_status(struct reset_controller_dev *rcdev,
unsigned long id)
{
+ struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
int val, err;
- err = zynqmp_pm_reset_get_status(ZYNQMP_RESET_ID + id, &val);
+ err = zynqmp_pm_reset_get_status(priv->data->reset_id + id, &val);
if (err)
return err;
@@ -52,10 +65,28 @@ static int zynqmp_reset_status(struct reset_controller_dev *rcdev,
static int zynqmp_reset_reset(struct reset_controller_dev *rcdev,
unsigned long id)
{
- return zynqmp_pm_reset_assert(ZYNQMP_RESET_ID + id,
+ struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+
+ return zynqmp_pm_reset_assert(priv->data->reset_id + id,
PM_RESET_ACTION_PULSE);
}
+static int zynqmp_reset_of_xlate(struct reset_controller_dev *rcdev,
+ const struct of_phandle_args *reset_spec)
+{
+ return reset_spec->args[0];
+}
+
+static const struct zynqmp_reset_soc_data zynqmp_reset_data = {
+ .reset_id = ZYNQMP_RESET_ID,
+ .num_resets = ZYNQMP_NR_RESETS,
+};
+
+static const struct zynqmp_reset_soc_data versal_reset_data = {
+ .reset_id = 0,
+ .num_resets = VERSAL_NR_RESETS,
+};
+
static const struct reset_control_ops zynqmp_reset_ops = {
.reset = zynqmp_reset_reset,
.assert = zynqmp_reset_assert,
@@ -71,18 +102,25 @@ static int zynqmp_reset_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
+ priv->data = of_device_get_match_data(&pdev->dev);
+ if (!priv->data)
+ return -EINVAL;
+
platform_set_drvdata(pdev, priv);
priv->rcdev.ops = &zynqmp_reset_ops;
priv->rcdev.owner = THIS_MODULE;
priv->rcdev.of_node = pdev->dev.of_node;
- priv->rcdev.nr_resets = ZYNQMP_NR_RESETS;
+ priv->rcdev.nr_resets = priv->data->num_resets;
+ priv->rcdev.of_reset_n_cells = 1;
+ priv->rcdev.of_xlate = zynqmp_reset_of_xlate;
return devm_reset_controller_register(&pdev->dev, &priv->rcdev);
}
static const struct of_device_id zynqmp_reset_dt_ids[] = {
- { .compatible = "xlnx,zynqmp-reset", },
+ { .compatible = "xlnx,zynqmp-reset", .data = &zynqmp_reset_data, },
+ { .compatible = "xlnx,versal-reset", .data = &versal_reset_data, },
{ /* sentinel */ },
};
--
2.17.1