2020-07-21 02:01:03

by Christian Hewitt

[permalink] [raw]
Subject: [PATCH v2] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3

Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
tuning errors on VIM3 after a few hours uptime:

[12483.917391] mmc0: tuning execution failed: -5
[30535.551221] mmc0: tuning execution failed: -5
[35359.953671] mmc0: tuning execution failed: -5
[35561.875332] mmc0: tuning execution failed: -5
[61733.348709] mmc0: tuning execution failed: -5

I do not see the same on VIM3L, so remove sd-uhs-sdr50 from the common dtsi
to silence the error, then (re)add it to the VIM3L dts.

Fixes: 4f26cc1c96c9 ("arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi")
Fixes: 700ab8d83927 ("arm64: dts: khadas-vim3: add support for the SM1 based VIM3L")
Signed-off-by: Christian Hewitt <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 1 -
arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts | 4 ++++
2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 27408c10a811..ddfd52b88002 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -293,7 +293,6 @@

bus-width = <4>;
cap-sd-highspeed;
- sd-uhs-sdr50;
max-frequency = <100000000>;

non-removable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index dbbf29a0dbf6..026b21708b07 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -88,6 +88,10 @@
status = "okay";
};

+&sd_emmc_a {
+ sd-uhs-sdr50;
+};
+
&usb {
phys = <&usb2_phy0>, <&usb2_phy1>;
phy-names = "usb2-phy0", "usb2-phy1";
--
2.17.1


2020-07-27 19:36:21

by Kevin Hilman

[permalink] [raw]
Subject: Re: [PATCH v2] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3

On Tue, 21 Jul 2020 01:59:50 +0000, Christian Hewitt wrote:
> Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
> tuning errors on VIM3 after a few hours uptime:
>
> [12483.917391] mmc0: tuning execution failed: -5
> [30535.551221] mmc0: tuning execution failed: -5
> [35359.953671] mmc0: tuning execution failed: -5
> [35561.875332] mmc0: tuning execution failed: -5
> [61733.348709] mmc0: tuning execution failed: -5
>
> [...]

Applied, thanks!

[1/1] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3
commit: f1bb924e8f5b50752a80fa5b48c43003680a7b64

Best regards,
--
Kevin Hilman <[email protected]>