From: Peng Fan <[email protected]>
i.MX8MN/P/Q is built with AArch64 hardware, this is to support
it could run in AArch32 mode with clock and pinctrl driver enabled.
Signed-off-by: Peng Fan <[email protected]>
---
arch/arm/configs/imx_v6_v7_defconfig | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 82d3ffb18e70..fbd02365e3b6 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -218,6 +218,9 @@ CONFIG_SPI_GPIO=y
CONFIG_SPI_IMX=y
CONFIG_SPI_FSL_DSPI=y
CONFIG_PINCTRL_IMX8MM=y
+CONFIG_PINCTRL_IMX8MN=y
+CONFIG_PINCTRL_IMX8MP=y
+CONFIG_PINCTRL_IMX8MQ=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_SIOX=m
CONFIG_GPIO_MAX732X=y
@@ -407,6 +410,9 @@ CONFIG_STAGING_MEDIA=y
CONFIG_VIDEO_IMX_MEDIA=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_CLK_IMX8MM=y
+CONFIG_CLK_IMX8MN=y
+CONFIG_CLK_IMX8MP=y
+CONFIG_CLK_IMX8MQ=y
CONFIG_SOC_IMX8M=y
CONFIG_IIO=y
CONFIG_MMA8452=y
--
2.16.4
On Tue, Jul 28, 2020 at 04:55:04PM +0800, [email protected] wrote:
> From: Peng Fan <[email protected]>
>
> i.MX8MN/P/Q is built with AArch64 hardware, this is to support
> it could run in AArch32 mode with clock and pinctrl driver enabled.
>
> Signed-off-by: Peng Fan <[email protected]>
Applied, thanks.