From: Peng Fan <[email protected]>
To arm64, "dc zva, dst" is used in memset.
Per ARM DDI 0487A.j, chapter C5.3.8 DC ZVA, Data Cache Zero by VA,
"If the memory region being zeroed is any type of Device memory,
this instruction can give an alignment fault which is prioritized
in the same way as other alignment faults that are determined
by the memory type."
On i.MX platforms, when elf is loaded to onchip TCM area, the region
is ioremapped, so "dc zva, dst" will trigger abort. And ioremap_wc()
on i.MX not able to write correct data to TCM area.
So we need to use io helpers, and extend the elf loader to support
platform specific memory functions.
Signed-off-by: Peng Fan <[email protected]>
---
drivers/remoteproc/remoteproc_elf_loader.c | 20 ++++++++++++++++++--
include/linux/remoteproc.h | 2 ++
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
index df68d87752e4..f442bac64432 100644
--- a/drivers/remoteproc/remoteproc_elf_loader.c
+++ b/drivers/remoteproc/remoteproc_elf_loader.c
@@ -129,6 +129,22 @@ u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
}
EXPORT_SYMBOL(rproc_elf_get_boot_addr);
+static void *rproc_elf_memcpy(struct rproc *rproc, void *dest, const void *src, size_t count)
+{
+ if (!rproc->ops->memcpy)
+ return memcpy(dest, src, count);
+
+ return rproc->ops->memcpy(rproc, dest, src, count);
+}
+
+static void *rproc_elf_memset(struct rproc *rproc, void *s, int c, size_t count)
+{
+ if (!rproc->ops->memset)
+ return memset(s, c, count);
+
+ return rproc->ops->memset(rproc, s, c, count);
+}
+
/**
* rproc_elf_load_segments() - load firmware segments to memory
* @rproc: remote processor which will be booted using these fw segments
@@ -214,7 +230,7 @@ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
/* put the segment where the remote processor expects it */
if (filesz)
- memcpy(ptr, elf_data + offset, filesz);
+ rproc_elf_memcpy(rproc, ptr, elf_data + offset, filesz);
/*
* Zero out remaining memory for this segment.
@@ -224,7 +240,7 @@ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
* this.
*/
if (memsz > filesz)
- memset(ptr + filesz, 0, memsz - filesz);
+ rproc_elf_memset(rproc, ptr + filesz, 0, memsz - filesz);
}
return ret;
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 0e8d2ff575b4..88fc9643c1a8 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -391,6 +391,8 @@ struct rproc_ops {
int (*load)(struct rproc *rproc, const struct firmware *fw);
int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
+ void *(*memcpy)(struct rproc *rproc, void *dest, const void *src, size_t count);
+ void *(*memset)(struct rproc *rproc, void *s, int c, size_t count);
unsigned long (*panic)(struct rproc *rproc);
};
--
2.16.4
From: Peng Fan <[email protected]>
Please not apply 2/2 for now, this 2/2 has not gone through
test on all i.MX8 platforms.
Signed-off-by: Peng Fan <[email protected]>
---
drivers/remoteproc/imx_rproc.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 8957ed271d20..8ad860c65256 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -6,6 +6,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
@@ -241,10 +242,22 @@ static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
return va;
}
+static void *imx_rproc_memcpy(struct rproc *rproc, void *dest, const void *src, size_t count)
+{
+ memcpy_toio((void * __iomem)dest, src, count);
+}
+
+static void *imx_rproc_memset(struct rproc *rproc, void *s, int c, size_t count)
+{
+ memset_io((void * __iomem)s, c, count);
+}
+
static const struct rproc_ops imx_rproc_ops = {
.start = imx_rproc_start,
.stop = imx_rproc_stop,
.da_to_va = imx_rproc_da_to_va,
+ .memset = imx_rproc_memset,
+ .memcpy = imx_rproc_memcpy,
};
static int imx_rproc_addr_init(struct imx_rproc *priv,
--
2.16.4
Hi,
please fix errors reported by test robot.
On Tue, Jul 28, 2020 at 05:31:13PM +0800, [email protected] wrote:
> From: Peng Fan <[email protected]>
>
> Please not apply 2/2 for now, this 2/2 has not gone through
> test on all i.MX8 platforms.
>
> Signed-off-by: Peng Fan <[email protected]>
> ---
> drivers/remoteproc/imx_rproc.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 8957ed271d20..8ad860c65256 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -6,6 +6,7 @@
> #include <linux/clk.h>
> #include <linux/err.h>
> #include <linux/interrupt.h>
> +#include <linux/io.h>
> #include <linux/kernel.h>
> #include <linux/mfd/syscon.h>
> #include <linux/module.h>
> @@ -241,10 +242,22 @@ static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
> return va;
> }
>
> +static void *imx_rproc_memcpy(struct rproc *rproc, void *dest, const void *src, size_t count)
> +{
> + memcpy_toio((void * __iomem)dest, src, count);
> +}
> +
> +static void *imx_rproc_memset(struct rproc *rproc, void *s, int c, size_t count)
> +{
> + memset_io((void * __iomem)s, c, count);
> +}
> +
> static const struct rproc_ops imx_rproc_ops = {
> .start = imx_rproc_start,
> .stop = imx_rproc_stop,
> .da_to_va = imx_rproc_da_to_va,
> + .memset = imx_rproc_memset,
> + .memcpy = imx_rproc_memcpy,
> };
>
> static int imx_rproc_addr_init(struct imx_rproc *priv,
> --
> 2.16.4
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
On Tue, Jul 28, 2020 at 05:31:13PM +0800, [email protected] wrote:
> From: Peng Fan <[email protected]>
>
> Please not apply 2/2 for now, this 2/2 has not gone through
> test on all i.MX8 platforms.
Why sending patches to the mailing list if they are not ready to be applied?
>
> Signed-off-by: Peng Fan <[email protected]>
> ---
> drivers/remoteproc/imx_rproc.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 8957ed271d20..8ad860c65256 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -6,6 +6,7 @@
> #include <linux/clk.h>
> #include <linux/err.h>
> #include <linux/interrupt.h>
> +#include <linux/io.h>
> #include <linux/kernel.h>
> #include <linux/mfd/syscon.h>
> #include <linux/module.h>
> @@ -241,10 +242,22 @@ static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
> return va;
> }
>
> +static void *imx_rproc_memcpy(struct rproc *rproc, void *dest, const void *src, size_t count)
> +{
> + memcpy_toio((void * __iomem)dest, src, count);
> +}
> +
> +static void *imx_rproc_memset(struct rproc *rproc, void *s, int c, size_t count)
> +{
> + memset_io((void * __iomem)s, c, count);
> +}
> +
> static const struct rproc_ops imx_rproc_ops = {
> .start = imx_rproc_start,
> .stop = imx_rproc_stop,
> .da_to_va = imx_rproc_da_to_va,
> + .memset = imx_rproc_memset,
> + .memcpy = imx_rproc_memcpy,
That won't work - you are modifying how _all_ the platforms out there are
working. As I indicated on the series on iMX8M, add a field to imx_rproc_dcfg
and apply the correct memory accessor based on that.
It might also suggest that it is time to split the iMX platform drivers, i.e
older MCU and iMX8M.
> };
>
> static int imx_rproc_addr_init(struct imx_rproc *priv,
> --
> 2.16.4
>