mt8xxx-resets.h actually just used to define TOPRGU_SW_RST_NUM.
Instead of resubmit the mt8xxx-reset.h for a new IC, get the number
of reset bits from dtsi is more easier to maintain.
Signed-off-by: Crystal Guo <[email protected]>
---
drivers/watchdog/mtk_wdt.c | 26 +++++---------------------
1 file changed, 5 insertions(+), 21 deletions(-)
diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
index d6a6393..adc88c2 100644
--- a/drivers/watchdog/mtk_wdt.c
+++ b/drivers/watchdog/mtk_wdt.c
@@ -9,8 +9,6 @@
* Based on sunxi_wdt.c
*/
-#include <dt-bindings/reset-controller/mt2712-resets.h>
-#include <dt-bindings/reset-controller/mt8183-resets.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/init.h>
@@ -64,18 +62,6 @@ struct mtk_wdt_dev {
struct reset_controller_dev rcdev;
};
-struct mtk_wdt_data {
- int toprgu_sw_rst_num;
-};
-
-static const struct mtk_wdt_data mt2712_data = {
- .toprgu_sw_rst_num = MT2712_TOPRGU_SW_RST_NUM,
-};
-
-static const struct mtk_wdt_data mt8183_data = {
- .toprgu_sw_rst_num = MT8183_TOPRGU_SW_RST_NUM,
-};
-
static int toprgu_reset_update(struct reset_controller_dev *rcdev,
unsigned long id, bool assert)
{
@@ -248,7 +234,7 @@ static int mtk_wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct mtk_wdt_dev *mtk_wdt;
- const struct mtk_wdt_data *wdt_data;
+ u32 toprgu_sw_rst_num;
int err;
mtk_wdt = devm_kzalloc(dev, sizeof(*mtk_wdt), GFP_KERNEL);
@@ -284,10 +270,10 @@ static int mtk_wdt_probe(struct platform_device *pdev)
dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n",
mtk_wdt->wdt_dev.timeout, nowayout);
- wdt_data = of_device_get_match_data(dev);
- if (wdt_data) {
- err = toprgu_register_reset_controller(pdev,
- wdt_data->toprgu_sw_rst_num);
+ err = of_property_read_u32(pdev->dev.of_node, "rst-num",
+ &toprgu_sw_rst_num);
+ if (!err) {
+ err = toprgu_register_reset_controller(pdev, toprgu_sw_rst_num);
if (err)
return err;
}
@@ -319,9 +305,7 @@ static int mtk_wdt_resume(struct device *dev)
#endif
static const struct of_device_id mtk_wdt_dt_ids[] = {
- { .compatible = "mediatek,mt2712-wdt", .data = &mt2712_data },
{ .compatible = "mediatek,mt6589-wdt" },
- { .compatible = "mediatek,mt8183-wdt", .data = &mt8183_data },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mtk_wdt_dt_ids);
--
1.8.1.1.dirty
Add rst-num property in watchdog node
Signed-off-by: Crystal Guo <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 7b781eb..decf156 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -332,6 +332,7 @@
compatible = "mediatek,mt8183-wdt",
"mediatek,mt6589-wdt";
reg = <0 0x10007000 0 0x100>;
+ rst-num = <19>;
#reset-cells = <1>;
};
--
1.8.1.1.dirty
Add rst-num property and update example
Signed-off-by: Crystal Guo <[email protected]>
---
Documentation/devicetree/bindings/watchdog/mtk-wdt.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index 4dd36bd..df19a4d 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -18,6 +18,7 @@ Required properties:
Optional properties:
- timeout-sec: contains the watchdog timeout in seconds.
- #reset-cells: Should be 1.
+- rst-num: the number of reset bits in toprgu.
Example:
@@ -26,5 +27,6 @@ watchdog: watchdog@10007000 {
"mediatek,mt6589-wdt";
reg = <0 0x10007000 0 0x100>;
timeout-sec = <10>;
+ rst-num = <23>;
#reset-cells = <1>;
};
--
1.8.1.1.dirty
On 28/07/2020 12:42, Crystal Guo wrote:
> mt8xxx-resets.h actually just used to define TOPRGU_SW_RST_NUM.
> Instead of resubmit the mt8xxx-reset.h for a new IC, get the number
> of reset bits from dtsi is more easier to maintain.
>
We want to have all the reset numbers in one header file. It makes no sense to
pass the reset number in one driver via DTS and in the rest through the header file.
Sorry but from my side this is NACK.
Regards,
Matthias
> Signed-off-by: Crystal Guo <[email protected]>
> ---
> drivers/watchdog/mtk_wdt.c | 26 +++++---------------------
> 1 file changed, 5 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
> index d6a6393..adc88c2 100644
> --- a/drivers/watchdog/mtk_wdt.c
> +++ b/drivers/watchdog/mtk_wdt.c
> @@ -9,8 +9,6 @@
> * Based on sunxi_wdt.c
> */
>
> -#include <dt-bindings/reset-controller/mt2712-resets.h>
> -#include <dt-bindings/reset-controller/mt8183-resets.h>
> #include <linux/delay.h>
> #include <linux/err.h>
> #include <linux/init.h>
> @@ -64,18 +62,6 @@ struct mtk_wdt_dev {
> struct reset_controller_dev rcdev;
> };
>
> -struct mtk_wdt_data {
> - int toprgu_sw_rst_num;
> -};
> -
> -static const struct mtk_wdt_data mt2712_data = {
> - .toprgu_sw_rst_num = MT2712_TOPRGU_SW_RST_NUM,
> -};
> -
> -static const struct mtk_wdt_data mt8183_data = {
> - .toprgu_sw_rst_num = MT8183_TOPRGU_SW_RST_NUM,
> -};
> -
> static int toprgu_reset_update(struct reset_controller_dev *rcdev,
> unsigned long id, bool assert)
> {
> @@ -248,7 +234,7 @@ static int mtk_wdt_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct mtk_wdt_dev *mtk_wdt;
> - const struct mtk_wdt_data *wdt_data;
> + u32 toprgu_sw_rst_num;
> int err;
>
> mtk_wdt = devm_kzalloc(dev, sizeof(*mtk_wdt), GFP_KERNEL);
> @@ -284,10 +270,10 @@ static int mtk_wdt_probe(struct platform_device *pdev)
> dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n",
> mtk_wdt->wdt_dev.timeout, nowayout);
>
> - wdt_data = of_device_get_match_data(dev);
> - if (wdt_data) {
> - err = toprgu_register_reset_controller(pdev,
> - wdt_data->toprgu_sw_rst_num);
> + err = of_property_read_u32(pdev->dev.of_node, "rst-num",
> + &toprgu_sw_rst_num);
> + if (!err) {
> + err = toprgu_register_reset_controller(pdev, toprgu_sw_rst_num);
> if (err)
> return err;
> }
> @@ -319,9 +305,7 @@ static int mtk_wdt_resume(struct device *dev)
> #endif
>
> static const struct of_device_id mtk_wdt_dt_ids[] = {
> - { .compatible = "mediatek,mt2712-wdt", .data = &mt2712_data },
> { .compatible = "mediatek,mt6589-wdt" },
> - { .compatible = "mediatek,mt8183-wdt", .data = &mt8183_data },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, mtk_wdt_dt_ids);
>
On 7/28/20 3:42 AM, Crystal Guo wrote:
> mt8xxx-resets.h actually just used to define TOPRGU_SW_RST_NUM.
> Instead of resubmit the mt8xxx-reset.h for a new IC, get the number
> of reset bits from dtsi is more easier to maintain.
> > Signed-off-by: Crystal Guo <[email protected]>
> ---
> drivers/watchdog/mtk_wdt.c | 26 +++++---------------------
> 1 file changed, 5 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
> index d6a6393..adc88c2 100644
> --- a/drivers/watchdog/mtk_wdt.c
> +++ b/drivers/watchdog/mtk_wdt.c
> @@ -9,8 +9,6 @@
> * Based on sunxi_wdt.c
> */
>
> -#include <dt-bindings/reset-controller/mt2712-resets.h>
> -#include <dt-bindings/reset-controller/mt8183-resets.h>
> #include <linux/delay.h>
> #include <linux/err.h>
> #include <linux/init.h>
> @@ -64,18 +62,6 @@ struct mtk_wdt_dev {
> struct reset_controller_dev rcdev;
> };
>
> -struct mtk_wdt_data {
> - int toprgu_sw_rst_num;
> -};
> -
> -static const struct mtk_wdt_data mt2712_data = {
> - .toprgu_sw_rst_num = MT2712_TOPRGU_SW_RST_NUM,
> -};
> -
> -static const struct mtk_wdt_data mt8183_data = {
> - .toprgu_sw_rst_num = MT8183_TOPRGU_SW_RST_NUM,
> -};
> -
> static int toprgu_reset_update(struct reset_controller_dev *rcdev,
> unsigned long id, bool assert)
> {
> @@ -248,7 +234,7 @@ static int mtk_wdt_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct mtk_wdt_dev *mtk_wdt;
> - const struct mtk_wdt_data *wdt_data;
> + u32 toprgu_sw_rst_num;
toprgu_sw_ is a completely unnecessary prefix for a local variable.
> int err;
>
> mtk_wdt = devm_kzalloc(dev, sizeof(*mtk_wdt), GFP_KERNEL);
> @@ -284,10 +270,10 @@ static int mtk_wdt_probe(struct platform_device *pdev)
> dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n",
> mtk_wdt->wdt_dev.timeout, nowayout);
>
> - wdt_data = of_device_get_match_data(dev);
> - if (wdt_data) {
> - err = toprgu_register_reset_controller(pdev,
> - wdt_data->toprgu_sw_rst_num);
> + err = of_property_read_u32(pdev->dev.of_node, "rst-num",
> + &toprgu_sw_rst_num);
There is no such property. Maybe that is added with a subsequent patch or
preceding patch, but that is not in -next. If this patch is applied without
rst-num already present in affected devicetree files, the code will no longer
work. That means this patch requires context, and can not be applied without it.
That in turn means it can not be patch 1 of 3.
Guenter
> + if (!err) {
> + err = toprgu_register_reset_controller(pdev, toprgu_sw_rst_num);
> if (err)
> return err;
> }
> @@ -319,9 +305,7 @@ static int mtk_wdt_resume(struct device *dev)
> #endif
>
> static const struct of_device_id mtk_wdt_dt_ids[] = {
> - { .compatible = "mediatek,mt2712-wdt", .data = &mt2712_data },
> { .compatible = "mediatek,mt6589-wdt" },
> - { .compatible = "mediatek,mt8183-wdt", .data = &mt8183_data },
I don't see the point of removing the mediatek,mt2712-wdt and mediatek,mt8183-wdt
compatible lines.
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, mtk_wdt_dt_ids);
>