Subject: [PATCH v1] Bluetooth: hci_qca: Stop collecting memdump again for command timeout during SSR

Setting memdump state to idle prior to setting of callback function
pointer for command timeout to NULL,causing the issue.Now moved the
initialisation of memdump state to qca_setup().

Fixes: d841502c79e3 ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
Signed-off-by: Venkata Lakshmi Narayana Gubba <[email protected]>
---
drivers/bluetooth/hci_qca.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 3d13002..20e1ded 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1668,6 +1668,8 @@ static int qca_setup(struct hci_uart *hu)
bt_dev_info(hdev, "setting up %s",
qca_is_wcn399x(soc_type) ? "wcn399x" : "ROME/QCA6390");

+ qca->memdump_state = QCA_MEMDUMP_IDLE;
+
retry:
ret = qca_power_on(hdev);
if (ret)
@@ -1817,9 +1819,6 @@ static void qca_power_shutdown(struct hci_uart *hu)
qca_flush(hu);
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);

- hu->hdev->hw_error = NULL;
- hu->hdev->cmd_timeout = NULL;
-
/* Non-serdev device usually is powered by external power
* and don't need additional action in driver for power down
*/
@@ -1841,6 +1840,9 @@ static int qca_power_off(struct hci_dev *hdev)
struct qca_data *qca = hu->priv;
enum qca_btsoc_type soc_type = qca_soc_type(hu);

+ hu->hdev->hw_error = NULL;
+ hu->hdev->cmd_timeout = NULL;
+
/* Stop sending shutdown command if soc crashes. */
if (soc_type != QCA_ROME
&& qca->memdump_state == QCA_MEMDUMP_IDLE) {
@@ -1848,7 +1850,6 @@ static int qca_power_off(struct hci_dev *hdev)
usleep_range(8000, 10000);
}

- qca->memdump_state = QCA_MEMDUMP_IDLE;
qca_power_shutdown(hu);
return 0;
}
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


2020-07-28 20:01:33

by Marcel Holtmann

[permalink] [raw]
Subject: Re: [PATCH v1] Bluetooth: hci_qca: Stop collecting memdump again for command timeout during SSR

Hi Venkata,

> Setting memdump state to idle prior to setting of callback function
> pointer for command timeout to NULL,causing the issue.Now moved the
> initialisation of memdump state to qca_setup().
>
> Fixes: d841502c79e3 ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
> Signed-off-by: Venkata Lakshmi Narayana Gubba <[email protected]>
> ---
> drivers/bluetooth/hci_qca.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)

patch has been applied to bluetooth-next tree.

Regards

Marcel