2020-08-03 14:21:42

by Jerome Brunet

Subject: [PATCH] arm64: dts: meson: vim3: correct led polarity

The LEDs on the vim3 are active when the gpio is high, not low.

Fixes: c6d29c66e582 ("arm64: dts: meson-g12b-khadas-vim3: add initial device-tree")
Signed-off-by: Jerome Brunet <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 4510a63b0006..9e2995dc144b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -70,13 +70,13 @@ leds {

led-white {
label = "vim3:white:sys";
- gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};

led-red {
label = "vim3:red";
- gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
};
};

--
2.25.4

2020-08-10 22:20:44

by Kevin Hilman

Subject: Re: [PATCH] arm64: dts: meson: vim3: correct led polarity

On Mon, 3 Aug 2020 16:18:50 +0200, Jerome Brunet wrote:
> The LEDs on the vim3 are active when the gpio is high, not low.

Applied, thanks!

[1/1] arm64: dts: meson: vim3: correct led polarity
(no commit info)

Best regards,
--
Kevin Hilman <[email protected]>